Used dimension in Quebec, Canada

Used Law Marot Milpro Screw Conveyor, 9'' Diameter x 239'' Long

• Manufacturer: Law Marot Milpro

-motor: 3 hp, 575 volt, 1760 rpm -output rpm: 44 approx. -conveyor dimensions: 10'' wide x 239'' long -screw diameter: 9'' -outfeed: 10'' x 10'' -liquid drain: 4.5'' npt fitting -shipping dimensions : 60'' ...

Used 500 Gallon Tank (Vessel), Stainless Steel

-mawp: 15 psi @ 300 deg.f -interior dimensions: 48'' diameter x 60'' straight side -dish top & bottom -top & bottom ports: 1.5'' -side ports: two 6'', one 3'', four 1.5'' -mounted on four carbon steel legs w...

Used 200 Gallon Jacketed Tank, Stainless Steel, Insulated

-jacketed for cooling, insulated with stainless steel clad -interior dimensions: 39'' wide x 89'' long x 30.5'' deep -open top with lid -end discharge: 1.5'' tri-clamp -mounted on a carbon steel platform with...

Used Alloy Hardfacing Gravity Separator, 9000 Gallons

• Manufacturer: Alloy

-capacity: 9000 gallons -with two stainless steel screw conveyors -each motor is: 0.3 hp, 575 volt, 1725 rpm -reducer ratio: 375/1 -output rpm: 5 approx. -material of construction: stainless steel -overall ...

Used 300 Gallon Jacketed Tank, Stainless Steel

-jacket pressure rating: 150 psi -stainless steel contact parts, insulated with exterior carbon steel cladding -interior dimensions: 42'' diameter x 53'' straight side -with bracket for clamp on mixer -end di...

Used 30 Gallon Tank, Stainless Steel, With Screen

-interior dimensions: 30’’ diameter x 25’’ straight side -dish bottom -tank has a screen welded 11.5'' from the top -center discharge: 1.5'' tri-clamp with valve -bottom ports: two 4'' tri-clamp -open top -...

Used 30 Gallon Tank, Stainless Steel, With Screen

-interior dimensions: 30’’ diameter x 28’’ straight side -dish bottom -tank has a screen welded 14.75'' from the top -center discharge: 1.5'' tri-clamp with valve -bottom ports: two 4'' tri-clamp -open top ...

Used 150 Gallon Tank (Vessel), 316 Stainless Steel

-vessel rated 25 psi @ 200 deg.f -national board no. 191 -interior dimensions: 31'' diameter x 45'' straight side -top gasketed lid: 14.5'' -dish bottom -center discharge, pipe to side: 0.75'' -mounted on c...

Used 1500 Gallon Tank, Stainless Steel, With Mixer

-with top entry Lightnin series 10 mixer (requires motor) -interior dimensions: 68'' diameter x 90'' straight side, plus dish bottom -center discharge: 3'' with valve -mounted on four carbon steel legs with pa...

Used 100 Gallon Tank, Stainless Steel, Insulated

-interior dimensions: 32’’ diameter x 26'' straight side -plus cone bottom -center discharge: 3'' tri-clamp -bottom cone side port: 1'' -ports: three 3'', two 2'', 1'' -interior separator -open top with lid...

Used Kettle Scrape Surface Agitator, 2 HP

-motor: 2 hp, 330/575 volt, 1740 rpm -gear reducer ratio: 31.23/1 -output rpm: 56 -stainless steel shaft diameter: 2.25'' -two sets of 12 scrapers -each scraper dimensions: 2'' x 4'' -previous use: cosmetic...

Used 160 Gallon Tank (Tote), 316 Stainless Steel

-interior dimensions: 37'' diameter x 21'' straight side, plus 28'' cone bottom -top manway: 24'' with lid -center discharge: 6'' -sanitary interior polish -mounted in stainless steel frame -overall dimensio...

Used Law Marot Milpro Screw Conveyor, 9'' Diameter x 144'' Long

• Manufacturer: Law Marot Milpro

-motor: 3 hp, 575 volt, 1760 rpm -output rpm: 67 approx. -conveyor dimensions: 10'' wide x 144'' long -screw diameter: 9'' -inlet: 16'' x 14'' -outfeed: 10'' x 10'' -liquid drain: 4.5'' npt -shipping dimen...

Used Law Marot Milpro Screw Conveyor, 9'' Diameter x 144'' Long

• Manufacturer: Law Marot Milpro

-motor: 3 hp, 575 volt, 1760 rpm -output rpm: 67 approx. -conveyor dimensions: 10'' wide x 144'' long -screw diameter: 9'' -inlet: 16'' x 14'' -outfeed: 10'' x 10'' -liquid drain: 4.5'' npt -shipping dimen...

Used 435 Gallon Jacketed Tank, 304 Stainless Steel

-manufacturer: Precision Stainless -jacket pressure rating: 150 psi @ 100 deg.f -interior dimensions: 37.5'' wide 60.5'' long x 44'' deep -top manway with lid: 18'' -top inlets: two 3'', one 2'', one 1.5'' -...