Used feed processing machinery in Saxony, Germany

VAT drive flange

Drive flange VAT, PICHLER & STROBL VAT378861 2x feed-through: Ø 54 / 40 mm, depth: 12 / 8 mm used drive flange - see S2380 ! New !

1993 Kallfass KC 5040

• Manufacturer: Kallfass
• Model: KC 5040

Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of...

TRITON WATER demineralization system

• Manufacturer: TRITON WATER

Demineralization system with pre-installed control cabinet TRITON WATER WAT VED K479 Control system: PLC Simatic S7-300 Control cabinet: RITTAL Baying system TS 8 2x TS8805 Width: 1600 mm, depth: 500 mm, height: ...

Tsomakos TSFD70/3-11-federhärten

• Manufacturer: Tsomakos

Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustabl...

BÜHLER VERTICA DFZH2 (probably)

• Manufacturer: Bühler
• Model: DFZH-2

Hammer mill used Capacity approx. 12 tons per hour Motor VEM and LOHER 72 and 75 kW 3000 rpm 400 V These mills are used for grinding free-flowing bulk material such as grain, animal feed and fodder. They are suit...

Luther Werke S200W

• Manufacturer: Luther Werke

REFUELING PUMP; GASOLINE PUMP WITH ENGINE; FUEL PUMP Comes from military stock. The pump is gasoline powered. It refuels fuel into fuel tanks e.g. car; truck. Mix gasoline with two-stroke engine oil in the ratio ...

1991 ECOAIR D40

• Manufacturer: Ecoair
• Model: D40
• Power requirement: 30 kW

compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar

2021 Hertz HBD7

• Manufacturer: Hertz
• Power requirement: 7.5 kW

SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated pressure tank - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D.

1991 GÜDE nicht bekannt

• Manufacturer: Güde
• Power requirement: 2.8 kW

Piston Compressor with Air Pressure Tank Condition: Cylinder head gasket and steel blade defective. The piston is ok. As a spare part donor! On sale as is!

2004 Atlas Copco GX5 FF

• Manufacturer: Atlas-Copco
• Model: GX 5 FF
• Noise level: 75 dB
• Power requirement: 5.5 kW

Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is.

1992 PRESSLUFT FRANTZ ES 20

• Manufacturer: PRESSLUFT FRANTZ
• Power requirement: 15 kW

compact construction with integrated filter techn. details - max. operational pressure of the tank 11,5bar - operation voltage 380V - filter make Balwin type BT 364 slightly damaged covering, besides that top use...

Schmalenberger ZHT 1032-08

• Manufacturer: Schmalenberger
• Power requirement: 3 kW

Mehrstufige Hochleistungspumpe. Further characteristics: -Insertion depth= 320mm -Large cover plate 360mm x 280mm - Motor RpM: 2870 RpM

2021 FINI Pulsar EVO BK119-5,5-SD

• Manufacturer: Fini
• Power requirement: 4 kW

Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliab...

Cremer TQF-4100 product counting system including bucket elevator to feed packaging machines (eg. VFFS, etc.)

• Manufacturer: Cremer

Cremer TQF-4100 product counting system including bucket elevator to feed packaging machines (eg. VFFS, etc.), 4-lane counter with separate infrared detection channels, automatic reject in case of undercounting o...

2013 Perfecta Cutting Line

• Manufacturer: Perfecta

We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm W...