Processing » Slovakia

Search By Category

Search By Manufacturer

Search By Region

Building Filters

406

Used Processing in Slovakia

  • Demag Ergotech 200/560-840 concept(year 2002)

    Demag Ergotech 200/560-840 concept(year 2002)

    • Manufacturer: Demag
    • Model: Ergotech

    Demag Controll: NC4 Model: Ergotech 200/560-840 concept Year : 2002 Clamping force: 200 ton Tie bar distance: 560x560mm Screw dia: 30mm Hours: 50.000 Core pullers: 1 hydraulic Pneumatic valve: 1 pc Poss...

    Trenčín, Slovakia
  • 2000 TEC Conveyor Belt

    2000 TEC Conveyor Belt

    • Manufacturer: TEC

    Conveyor belt TEC Adjustable height: 900-1050 mm Width: 600 mm Lenght: 2500 mm This belt was used for Engel 350 ton machine

    Trenčín, Slovakia
  • 2014 MAPRO CONVEYOR BELT 2041x500

    2014 MAPRO CONVEYOR BELT 2041x500

    • Manufacturer: MAPRO

    Conveyor belt MAPRO Adjustable height: 850-1300 mm Lenght: 540 mm Lenght: 2100 mm

    Trenčín, Slovakia
  • RESERVED (2007) Krauss Maffei Bolt

    RESERVED (2007) Krauss Maffei Bolt on unit SP390, screw 40 mm

    • Manufacturer: Krauss-Maffei

    Krauss Maffei Bolt on external injection unit Model: SP390BO Year: 2007 Screw: 40mm Injection volume: 204 cm3 Max temperature: 375 degrees Max Pressure: 1860 bar MC4 controll Was used for Krauss Maffei 20...

    Trenčín, Slovakia
  • (2008) Engel Victory 1050/180 Tech

    (2008) Engel Victory 1050/180 Tech

    • Manufacturer: Engel
    • Model: Victory

    Engel Victory 1050/180 Tech CC200 controll Clamping force :180 ton Screw dia: 60 mm Injection volume: 508 cm3 Cores: 1 + 2 Air blow : 1

    Trenčín, Slovakia
  • 2021 LAC KNC/H 1500/65 FURNACE

    2021 LAC KNC/H 1500/65 FURNACE (DRYER)

    • Manufacturer: LAC

    Manufacturer: Czech Republic LAC Condition: NEW, UNUSED furnace. After a year of purchase, it was decided that the company would not use it in technological processes. Technical parameters: - Type: KNC/H 1500/...

    Slovakia
  • Demag EL-EXIS S 100/420-310 hybrid

    Demag EL-EXIS S 100/420-310 hybrid (year 2005)

    • Manufacturer: Demag

    Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamp...

    Slovakia
  • 2019 Wittmann MacroPower 1100 /

    2019 Wittmann MacroPower 1100 / 8800 SERVO-hydraulic

    • Manufacturer: Wittmann

    WITTMANN BATTENFELD MacroPower 1100 / 8800 1100t injection molding machine (2019). servo-hydraulic injection machine - Screw diameter: 105 mm. - Injection volume: 4.545 cm³. - Screw speed: 159 rpm. - Screw L...

    Slovakia
  • 1998 Arburg Allrounder 420 M

    1998 Arburg Allrounder 420 M 800 - 225, 80 t

    • Manufacturer: Arburg
    • Model: 420 M

    NEGOTIABLE PRICE! Clamping force 80 t Srew 30 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 0,5 t Shot capacity 106 ccm Control Multitronica Core pullers - no Hotrunner zone...

    Slovakia
  • 2003 Arburg Allrounder Centex 320

    2003 Arburg Allrounder Centex 320 C 500 - 250, 50 t

    • Manufacturer: Arburg
    • Model: 320 C

    Clamping force 50 ton Screw 30 mm Mold height min 200 mm distance between tie bars 320 mm Daylight between platens 320 mm Mould weight max 0,5 t Shot capacity 106 ccm Weight 2330 kg, L x W 3520x1460 mm co...

    Slovakia
  • Arburg Allrounder CENTEX 420 C

    Arburg Allrounder CENTEX 420 C 1000 - 350, 100 t (2003)

    • Manufacturer: Arburg
    • Model: 420 C 1000-350

    Clamping force 100 t Screw 45 mm Mold height min 250 mm Distance between tie bars 420 mm Mould weight max 1,2 t Shot capacity 230 ccm Control Selogica Core pullers - 2 Hotrunner zones - 12 Weight 3430 kg...

    Slovakia
  • RESERVED: Arburg 320 C 500-170

    RESERVED: Arburg 320 C 500-170 Golden edition, screw 20mm (year 2007)

    • Manufacturer: Arburg
    • Model: 320 C

    Clamping force 50 ton Tie bar distance: 320x320 cm Mold height min: 200mm Platen daylight max: 550mm Screw dia: 20 mm Shot weight: 29g/PS made in 10/2007 Hours: 40.162 Heating: 9.4kW Pump: 11kW Total lo...

    Slovakia
  • 2008 PIOVAN TP12 Tempering Unit

    2008 PIOVAN TP12 Tempering Unit

    • Manufacturer: Piovan
    • Model: TP12

    12 kW weight 50 kg the side cover is missing

    Slovakia
  • Loher MOTOR JNGA from injection

    Loher MOTOR JNGA from injection molding machine Krauss Maffei 650 tonne

    • Manufacturer: Loher

    100 kW 470 kg, 130x80 cm on europallet, H 700 mm

    Slovakia
  • Krauss Maffei CX 420-2000, MC5

    Krauss Maffei CX 420-2000, MC5 control FK (2011)

    • Manufacturer: Krauss-Maffei

    KM420T Clamping force: 420 ton Plate dimensions (HxV) : 1270x1230 mm Distance between tie bars: 800x 800mm Mold opening distance max: 1020 mm Form height min. mm 580mm (380 mm standard +200mm) Maximum plate...

    Slovakia
  • no-image_en.png

    Arburg 820 S 4000-2100 Injection Molding

    • Manufacturer: Arburg
    • Model: 820 S 4000-2100

    Good condition Arburg 820 S 4000-2100 Injection Moldings manufactured in 2003. Located in Slovakia and other countries. Click request price for more information.

    Slovakia
2122232425

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.