Processing » Slovakia

Building Filters

72

Used controller in Slovakia

  • Engel E-MAC 310/75 ,Engel Retrofit

    Engel E-MAC 310/75 ,Engel Retrofit 2024 Thermoplast

    • Manufacturer: Engel

    Engel E-MAC 310/75 , full electric machine Controll: CC300 ROBOT/Picker Engel ER/USP 5 EP4 Serial nr.: 217614 Year of retrofit by Engel: 2024 Clamping force: 75T Size of mould platens: 560x600mm Dist. betw...

    Trenčín, Slovakia
  • (2017) Krauss Maffei 121-540PX (only

    (2017) Krauss Maffei 121-540PX (only 100 hours) Electric machine

    • Manufacturer: Krauss-Maffei

    MC6 controll Injection Unit - Screw diameter: 40 mm - Shot weight: 206 g/ps - Stroke volume: 226 CM³ - Injection pressure: 2377 bar - Plasticizing rate max.: 24 g/s ps - Screw speed: 297 1/min - Heating capacit...

    Trenčín, Slovakia
  • Engel ES11050/1000 DUO (year 2002)

    Engel ES11050/1000 DUO (year 2002) 1000 ton, ERC linear Robot

    • Manufacturer: Engel

    Clamping force: 1000 ton Mould Height Min/Max: 600-1200mm Platen size: 2000x 1830 mm Column distance: 1400x1150 mm Screw: 120mm Injection Volume: 6450 cm3 Injection pressure: 1480 bar Heating power: 80 kW ...

    Trenčín, Slovakia
  • RESERVED Injection molding machine Krauss

    RESERVED Injection molding machine Krauss Maffei 350 (tons) - 750/380 CX Z 2K (rotary table) , new pumps

    • Manufacturer: Krauss-Maffei

    KM350-750-380 CXZ Year: 2013 Controll : MC5 Clamping force: 350 tons Tie bar distance HxV: 950 x 850 mm Max./Min. mold height: 920 x 380 mm Main injection unit SP 750 Screw diameter: 50 mm Injection volum...

    Slovakia
  • 2015 HAITIAN MA 4700 II

    2015 HAITIAN MA 4700 II 2200

    • Manufacturer: HAITIAN

    Haitian MA 4700 II 2200, 2015 01-manufacturer: Haitian 02-type: MA 4700 II 2200 03-year of manufacture: 2015 04-condition: out of running production 05-operating hours: ca. 21.000 10-CLAMPING UNIT: - ...

    Trenčín, Slovakia
  • 2013 HAITIAN JUPITER 13000-10600

    2013 HAITIAN JUPITER 13000-10600

    • Manufacturer: HAITIAN

    Hours approx: 22.000 Machine is sold without robot, possible to buy TECHNICAL DATA CLAMP UNIT CLAMPING FORCE PLATEN SIZES D.B.T.B. MIN MOULD HEIGHT MAX MOULD HEIGHT MOULD OPENING STROKE MAX DAYLIGHT HY...

    Trenčín, Slovakia
  • Geiger Handling MiniServo 0.5 Version

    Geiger Handling MiniServo 0.5 Version 3.0 Picker - for spare parts

    • Manufacturer: Geiger Handling

    Little robot picker, inlet puller 3pieces: MiniServo 0.5, Version 3.0, year of made 2007 6 bar / 230 V / 50 Hz / 250 VA Made in Germany Pickers are sold as they are in state now, without warranty - working, w...

    Slovakia
  • Tool temp TT-PHE 168E/PHE (year

    Tool temp TT-PHE 168E/PHE (year 2009) (3x)

    • Manufacturer: Tool Temp

    Model: TT-168E/PHE/TT-168H/PHE or TT-168EA/PHE/TT-168H/A/PHE Heating Capacity: 12 kW switchable in stages 3/9/12 kW or 18 kW switchable in stages 6/12/18 kW Temperature Range: 20°C to 90°C with water. The lowe...

    Slovakia
  • 2015 NOVAPAX Blow Molding Machine

    2015 NOVAPAX Blow Molding Machine model NSB E 400 (plastics bottles untill 0.5 L)

    • Manufacturer: Novapax

    Press for the production of plastic bottles up to 0.5 L by blowing Made in Germany in 2015 machine is not under power, is in stock Injection Unit - electric srew drive - Injection unit accrding to EUROMAP 260...

    Slovakia
  • RESERVED Engel DUO 2550/650 (2007),

    RESERVED Engel DUO 2550/650 (2007), Engel ERC robot

    • Manufacturer: Engel
    • Model: DUO 2550650

    Engel DUO 2550/650 year: 2007 CC200 controll Clamping/injection unit Clamping force [kN] 6500 Dimensions of the mounting plate (hxh) [mm] 1465 x 1360 Distance between columns (hxh) [mm] 1025 x 930 min./max....

    Trenčín, Slovakia
  • Krauss Maffei 420-1900 C2

    Krauss Maffei 420-1900 C2

    • Manufacturer: Krauss-Maffei
    • Model: 420-1900 C2

    Material used: pc, pa, ppc, hp 4x hot runners 2x air valves for needle control Multipikator- device for increasing pressure from 6 to 12 bar

    Trenčín, Slovakia
  • (2008) Engel Victory 1050/180 Tech

    (2008) Engel Victory 1050/180 Tech

    • Manufacturer: Engel
    • Model: Victory

    Engel Victory 1050/180 Tech CC200 controll Clamping force :180 ton Screw dia: 60 mm Injection volume: 508 cm3 Cores: 1 + 2 Air blow : 1

    Trenčín, Slovakia
  • Krauss Maffei Krauss Maffei 180-750AX

    Krauss Maffei Krauss Maffei 180-750AX (2010 , new servo)

    • Manufacturer: Krauss-Maffei

    Krauss Maffei 180-750AX (full electric machine) Clamping force: 180 ton Injection Unit SP750AX Screw: 50 mm Controll: MC5 Machine has new servo which cost client(20.000€)

    Trenčín, Slovakia
  • Krauss Maffei 300-1000CX (year 2013

    Krauss Maffei 300-1000CX (year 2013 ) + Sepro Success 22 robot

    • Manufacturer: Krauss-Maffei
    • Model: 300-1000CX

    - Clamp Force 300 Tonne (3000KN) - Clamp Unit 995 x 1050mm - DBTB 630 x 630mm - Screw Dia 55mm - Shot Weight 476g - MC5 Control - Year 2013 Machine has only 30.000 hours , is from clean medical industry.

    Trenčín, Slovakia
  • (2018) SEPRO Succes 5 linear

    (2018) SEPRO Succes 5 linear robot , x=1500mm

    • Manufacturer: Sepro

    Industrial linear robot Serial nr.: R006336-02 Sepro Success 5 Year: 2018 Sepro Visual 2 controll X= 1500 mm Y= 400 mm Z= 1000 mm Head= 0-90 degrees Payload : 3kg Suitable for machines in tonnage: 20-80...

    Trenčín, Slovakia
12345

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.