Processing » Slovakia

Building Filters

21

Used control unit in Slovakia

  • RESERVED (2007) Krauss Maffei Bolt

    RESERVED (2007) Krauss Maffei Bolt on unit SP390, screw 40 mm

    • Manufacturer: Krauss-Maffei

    Krauss Maffei Bolt on external injection unit Model: SP390BO Year: 2007 Screw: 40mm Injection volume: 204 cm3 Max temperature: 375 degrees Max Pressure: 1860 bar MC4 controll Was used for Krauss Maffei 20...

    Trenčín, Slovakia
  • New temperature unit 2023 Single

    New temperature unit 2023 Single Compact WK3-160-9-50

    • Manufacturer: Single

    Max. temperature: 160° Heating power: 9kW Cooling power: 50kW Flow rate: 38 l/min Pump: magnetic clutch controller: SBC-Tplus flow measurement Current interface 20mA , TTY; Protocol selectable; Plug 16 A/...

    Slovakia
  • Krauss Maffei CX 420-2000, MC5

    Krauss Maffei CX 420-2000, MC5 control FK (2011)

    • Manufacturer: Krauss-Maffei

    KM420T Clamping force: 420 ton Plate dimensions (HxV) : 1270x1230 mm Distance between tie bars: 800x 800mm Mold opening distance max: 1020 mm Form height min. mm 580mm (380 mm standard +200mm) Maximum plate...

    Slovakia
  • (2014) Wittmann Battenfeld MacroPower E

    (2014) Wittmann Battenfeld MacroPower E 450/2100+ UNILOG B6P, SERVO

    • Manufacturer: Battenfeld

    Model: MacroPower E 450/2100+ UNILOG B6P (SERVO) Control: UNILOG B6 Technical Data Injection Unit Screw diameter = 65 mm Screw L/D ratio = 22 Specific injection pressure = 1959 bar Calculated stroke volume ...

    Trenčín, Slovakia
  • RESERVED: Krauss Maffei KM 420-2000

    RESERVED: Krauss Maffei KM 420-2000 CX (2015) Blue Power

    • Manufacturer: Krauss-Maffei

    MC6 control with color monitor Clamping unit Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold...

    Trenčín, Slovakia
  • RESERVED Injection molding machine Krauss

    RESERVED Injection molding machine Krauss Maffei 350 (tons) - 750/380 CX Z 2K (rotary table) , new pumps

    • Manufacturer: Krauss-Maffei

    KM350-750-380 CXZ Year: 2013 Controll : MC5 Clamping force: 350 tons Tie bar distance HxV: 950 x 850 mm Max./Min. mold height: 920 x 380 mm Main injection unit SP 750 Screw diameter: 50 mm Injection volum...

    Slovakia
  • (2017) Krauss Maffei 121-540PX (only

    (2017) Krauss Maffei 121-540PX (only 100 hours) Electric machine

    • Manufacturer: Krauss-Maffei

    MC6 controll Injection Unit - Screw diameter: 40 mm - Shot weight: 206 g/ps - Stroke volume: 226 CM³ - Injection pressure: 2377 bar - Plasticizing rate max.: 24 g/s ps - Screw speed: 297 1/min - Heating capacit...

    Trenčín, Slovakia
  • (2019) Engel DUO12060/900WP

    (2019) Engel DUO12060/900WP

    • Manufacturer: Engel

    Engel DUO12060/900WP (ECO-Drive) Year : 2019 Hours: 9900 CC300 controll Viper 40 robot Clamping force: 900 ton Opening stroke: 1800 mm Tie Bar distance: 1420x1170 mm Platen size: 1850x 1810 mm Injection ...

    Trenčín, Slovakia
  • 2015 HAITIAN MA 4700 II

    2015 HAITIAN MA 4700 II 2200

    • Manufacturer: HAITIAN

    Haitian MA 4700 II 2200, 2015 01-manufacturer: Haitian 02-type: MA 4700 II 2200 03-year of manufacture: 2015 04-condition: out of running production 05-operating hours: ca. 21.000 10-CLAMPING UNIT: - ...

    Trenčín, Slovakia
  • 2013 HAITIAN JUPITER 13000-10600

    2013 HAITIAN JUPITER 13000-10600

    • Manufacturer: HAITIAN

    Hours approx: 22.000 Machine is sold without robot, possible to buy TECHNICAL DATA CLAMP UNIT CLAMPING FORCE PLATEN SIZES D.B.T.B. MIN MOULD HEIGHT MAX MOULD HEIGHT MOULD OPENING STROKE MAX DAYLIGHT HY...

    Trenčín, Slovakia
  • 2015 NOVAPAX Blow Molding Machine

    2015 NOVAPAX Blow Molding Machine model NSB E 400 (plastics bottles untill 0.5 L)

    • Manufacturer: Novapax

    Press for the production of plastic bottles up to 0.5 L by blowing Made in Germany in 2015 machine is not under power, is in stock Injection Unit - electric srew drive - Injection unit accrding to EUROMAP 260...

    Slovakia
  • (2007) ARBURG 570C 2000-800 Golden

    (2007) ARBURG 570C 2000-800 Golden edition

    • Manufacturer: Arburg

    Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] ...

    Trenčín, Slovakia
  • Krauss Maffei 121-380 PX (2021)

    Krauss Maffei 121-380 PX (2021)

    • Manufacturer: Krauss-Maffei

    Clamping Force: 120 ton Mold opening force: 180 kN Platten size: 710 x 660 mm DBTB: 530 x 480 mm Mold opening stroke: 400 mm Daylight: 850 mm Ejector stroke: 175 mm Ejector speed: 350 mm/s Injection unit:...

    Slovakia
  • Engel E-MAC 310/75 ,Engel Retrofit

    Engel E-MAC 310/75 ,Engel Retrofit 2024 Thermoplast

    • Manufacturer: Engel

    Engel E-MAC 310/75 , full electric machine Controll: CC300 ROBOT/Picker Engel ER/USP 5 EP4 Serial nr.: 217614 Year of retrofit by Engel: 2024 Clamping force: 75T Size of mould platens: 560x600mm Dist. betw...

    Trenčín, Slovakia
  • RESERVED Engel DUO 2550/650 (2007),

    RESERVED Engel DUO 2550/650 (2007), Engel ERC robot

    • Manufacturer: Engel
    • Model: DUO 2550650

    Engel DUO 2550/650 year: 2007 CC200 controll Clamping/injection unit Clamping force [kN] 6500 Dimensions of the mounting plate (hxh) [mm] 1465 x 1360 Distance between columns (hxh) [mm] 1025 x 930 min./max....

    Trenčín, Slovakia
12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.