Processing » Slovakia

Building Filters

33

Used equipment in Slovakia

  • 2019 Comandulli OMEGA 100

    2019 Comandulli OMEGA 100

    • Manufacturer: Comandulli
    • Model: Omega 100

    Flat and rounded edges up to 10 cm Bearings changed, new belt. Machine like new. Tested. Guarantee 1 year. 2+8+4 heads + calibrator

    Slovakia
  • 2013 MIYACHI Compact Yag Laser

    2013 MIYACHI Compact Yag Laser type ML-2350A with DELTATHERM coller

    • Manufacturer: Miyachi

    This welding device contens laser and coooler Laser Welder: MIYACHI, Compact Yag Laser type ML-2350A Cooling: DELTATHERM Was used from year 2013 till 2021 It is funtional Parameters Oscillator: - max rated...

    Slovakia
  • New temperature unit 2023 Single

    New temperature unit 2023 Single Compact WK3-160-9-50

    • Manufacturer: Single

    Max. temperature: 160° Heating power: 9kW Cooling power: 50kW Flow rate: 38 l/min Pump: magnetic clutch controller: SBC-Tplus flow measurement Current interface 20mA , TTY; Protocol selectable; Plug 16 A/...

    Slovakia
  • RESERVED: (2012) Arburg 275 V

    RESERVED: (2012) Arburg 275 V 250-70 (vertical)

    • Manufacturer: Arburg

    Clamping force: 25 tons Mould height: 150-220 mm Distance between platens: 375-475 mm Screw diameter: 18 mm Injection volume: 23 cm3 Shot wight (PS): 21 g Equipment: Cores: 3x Heating zones: 6x Weight 17...

    Slovakia
  • Arburg 370 S 700-170 U

    Arburg 370 S 700-170 U (2010)

    • Manufacturer: Arburg

    Clamping force: 70 tons Distance between tie bars: 370 x 370 mm Platten dimensions: 510 x 510 mm Screw diameter: 30 mm Injection volume: 85 cm3 Shot weight (PS): 77 g Injection pressure: 2000 bar Equipment...

    Slovakia
  • (2013) Arburg 370 S 700-290

    (2013) Arburg 370 S 700-290

    • Manufacturer: Arburg

    Clamping force: 70 tons Distance between tie bars: 370 x 370 mm Platten dimensions: 510 x 510 mm Screw diameter: 35 mm Injection volume: 144 cm3 Shot weight (PS): 132 g Injection pressure: 2000 bar Equipme...

    Slovakia
  • Reserved: Arburg 1200 T 800-170

    Reserved: Arburg 1200 T 800-170 (2013, 80 tons) vertical SERVO Rotary table 1200mm

    • Manufacturer: Arburg

    Clamping force: 80 tons Mould height: 300 mm Distance between platens: 600 mm Table diameter: 1200 mm Screw diameter: 30 mm Injection volume: 85 cm3 Shot wight (PS): 77 g Equipment: Cores: 2x Heating zon...

    Slovakia
  • RESERVED: Arburg 1200T-800-150 (vertical) ,

    RESERVED: Arburg 1200T-800-150 (vertical) , screw: 30 mm/ only 24.000 hours

    • Manufacturer: Arburg

    Clamping force: 80 tons Mould height: 300 mm Distance between platens: 600 mm Table diameter: 1200 mm Screw diameter: 30 mm Injection volume: 71 cm3 Shot wight (PS): 65 g Equipment: Cores: 2x Heating zon...

    Slovakia
  • RESERVED: Arburg 270 S 350-100

    RESERVED: Arburg 270 S 350-100 U (2010) Vertical, horizontal machine, only 31.000 hours

    • Manufacturer: Arburg

    Arburg universal machine possible to use in Horizontal also Vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection...

    Slovakia
  • Demag InElect 160/520-680 (2012)

    Demag InElect 160/520-680 (2012)

    • Manufacturer: Demag

    Clamping force: 160 tons Platten dimensions: 760 x 785 mm Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection pressure: 2150 bar Injection volume: 318 cm3 Shot weight: 283 g Equipment: ...

    Slovakia
  • Arburg 270 U 350-100U (2006)

    Arburg 270 U 350-100U (2006)

    • Manufacturer: Arburg

    Universal machine / possible to use in horizontal, vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: ...

    Slovakia
  • (2007) ARBURG 570C 2000-800 Golden

    (2007) ARBURG 570C 2000-800 Golden edition

    • Manufacturer: Arburg

    Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] ...

    Trenčín, Slovakia
  • Reserved: Arburg 1200 T 800-170

    Reserved: Arburg 1200 T 800-170 (2013, 80 tons) Servo rotary vertical - only 16.000 hours!

    • Manufacturer: Arburg

    Arburg 1200 T 800-170 Servo Clamping force: 80 tons Mould height: 300 mm Distance between platens: 600 mm Table diameter: 1200 mm Screw diameter: 30 mm Injection volume: 85 cm3 Shot wight (PS): 77 g Equip...

    Slovakia
  • RESERVED (2014) Arburg 375 V

    RESERVED (2014) Arburg 375 V 500-170 (vertical)

    • Manufacturer: Arburg

    Clamping force: 50 ton Min. mould height: 200 mm Max. mould height: 550 mm Max. open daylight: 302 mm Opening stroke: 225 mm Round table diameter: 630 mm Ejector force: 70 kN Centering diameter of moving p...

    Slovakia
  • Demag ERGOTECH 4200/800-1450 SYSTEM (2001,

    Demag ERGOTECH 4200/800-1450 SYSTEM (2001, NEW Pump,new barrel!) 420 ton

    • Manufacturer: Demag
    • Model: Ergotech

    Clamping force: 420 tons Max. mold weight: 5100 kg Min. mold height: 380 mm Max. mold height: 820 mm Distance between tie bars: 800 x 710 mm Centering ring fix: 160 mm Screw diameter: 50 mm Injection volum...

    Slovakia
  • no-image_en.png

    Comandulli Omega 100 Stone Equipment

    • Manufacturer: Comandulli
    • Model: Omega 100

    Good condition Comandulli Omega 100 Stone Equipment manufactured in 2006. Located in USA and other countries. Click request price for more information.

    USA
123

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.