Processing » Slovakia

Building Filters

32

Used processing equipment in Slovakia

  • 2019 Comandulli OMEGA 100

    2019 Comandulli OMEGA 100

    • Manufacturer: Comandulli
    • Model: Omega 100

    Flat and rounded edges up to 10 cm Bearings changed, new belt. Machine like new. Tested. Guarantee 1 year. 2+8+4 heads + calibrator

    Slovakia
  • 2013 MIYACHI Compact Yag Laser

    2013 MIYACHI Compact Yag Laser type ML-2350A with DELTATHERM coller

    • Manufacturer: Miyachi

    This welding device contens laser and coooler Laser Welder: MIYACHI, Compact Yag Laser type ML-2350A Cooling: DELTATHERM Was used from year 2013 till 2021 It is funtional Parameters Oscillator: - max rated...

    Slovakia
  • New temperature unit 2023 Single

    New temperature unit 2023 Single Compact WK3-160-9-50

    • Manufacturer: Single

    Max. temperature: 160° Heating power: 9kW Cooling power: 50kW Flow rate: 38 l/min Pump: magnetic clutch controller: SBC-Tplus flow measurement Current interface 20mA , TTY; Protocol selectable; Plug 16 A/...

    Slovakia
  • (2014) Wittmann Battenfeld MacroPower E

    (2014) Wittmann Battenfeld MacroPower E 450/2100+ UNILOG B6P, SERVO

    • Manufacturer: Battenfeld

    Model: MacroPower E 450/2100+ UNILOG B6P (SERVO) Control: UNILOG B6 Technical Data Injection Unit Screw diameter = 65 mm Screw L/D ratio = 22 Specific injection pressure = 1959 bar Calculated stroke volume ...

    Trenčín, Slovakia
  • (2007) ARBURG 570C 2000-800 Golden

    (2007) ARBURG 570C 2000-800 Golden edition

    • Manufacturer: Arburg

    Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] ...

    Trenčín, Slovakia
  • (2017) Krauss Maffei 121-540PX (only

    (2017) Krauss Maffei 121-540PX (only 100 hours) Electric machine

    • Manufacturer: Krauss-Maffei

    MC6 controll Injection Unit - Screw diameter: 40 mm - Shot weight: 206 g/ps - Stroke volume: 226 CM³ - Injection pressure: 2377 bar - Plasticizing rate max.: 24 g/s ps - Screw speed: 297 1/min - Heating capacit...

    Trenčín, Slovakia
  • 2013 HAITIAN JUPITER 13000-10600

    2013 HAITIAN JUPITER 13000-10600

    • Manufacturer: HAITIAN

    Hours approx: 22.000 Machine is sold without robot, possible to buy TECHNICAL DATA CLAMP UNIT CLAMPING FORCE PLATEN SIZES D.B.T.B. MIN MOULD HEIGHT MAX MOULD HEIGHT MOULD OPENING STROKE MAX DAYLIGHT HY...

    Trenčín, Slovakia
  • RESERVED: Krauss Maffei KM 420-2000

    RESERVED: Krauss Maffei KM 420-2000 CX (2015) Blue Power

    • Manufacturer: Krauss-Maffei

    MC6 control with color monitor Clamping unit Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold...

    Trenčín, Slovakia
  • Negri Bossi 10000H-8400 (1000 tons)

    Negri Bossi 10000H-8400 (1000 tons)

    • Manufacturer: Negri Bossi

    Year: 2015 Clamping unit Max clamping force: 10000 kN Distance between tie bars: 1150 x 1350 mm Platen dimensions: 1700 x 1900 mm Min / max mould height: 500-1200 mm Nozzle forward power: 124 kN Max. openi...

    Trenčín, Slovakia
  • (2013) Arburg 370 S 700-290

    (2013) Arburg 370 S 700-290

    • Manufacturer: Arburg

    Clamping force: 70 tons Distance between tie bars: 370 x 370 mm Platten dimensions: 510 x 510 mm Screw diameter: 35 mm Injection volume: 144 cm3 Shot weight (PS): 132 g Injection pressure: 2000 bar Equipme...

    Slovakia
  • RESERVED: (2012) Arburg 275 V

    RESERVED: (2012) Arburg 275 V 250-70 (vertical)

    • Manufacturer: Arburg

    Clamping force: 25 tons Mould height: 150-220 mm Distance between platens: 375-475 mm Screw diameter: 18 mm Injection volume: 23 cm3 Shot wight (PS): 21 g Equipment: Cores: 3x Heating zones: 6x Weight 17...

    Slovakia
  • Arburg 370 S 700-170 U

    Arburg 370 S 700-170 U (2010)

    • Manufacturer: Arburg

    Clamping force: 70 tons Distance between tie bars: 370 x 370 mm Platten dimensions: 510 x 510 mm Screw diameter: 30 mm Injection volume: 85 cm3 Shot weight (PS): 77 g Injection pressure: 2000 bar Equipment...

    Slovakia
  • Demag InElect 160/520-680 (2012)

    Demag InElect 160/520-680 (2012)

    • Manufacturer: Demag

    Clamping force: 160 tons Platten dimensions: 760 x 785 mm Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection pressure: 2150 bar Injection volume: 318 cm3 Shot weight: 283 g Equipment: ...

    Slovakia
  • Reserved: Arburg 1200 T 800-170

    Reserved: Arburg 1200 T 800-170 (2013, 80 tons) vertical SERVO Rotary table 1200mm

    • Manufacturer: Arburg

    Clamping force: 80 tons Mould height: 300 mm Distance between platens: 600 mm Table diameter: 1200 mm Screw diameter: 30 mm Injection volume: 85 cm3 Shot wight (PS): 77 g Equipment: Cores: 2x Heating zon...

    Slovakia
  • RESERVED: Arburg 270 S 350-100

    RESERVED: Arburg 270 S 350-100 U (2010) Vertical, horizontal machine, only 31.000 hours

    • Manufacturer: Arburg

    Arburg universal machine possible to use in Horizontal also Vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection...

    Slovakia
123

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.