Processing » Spain

Search By Category

Search By Manufacturer

Search By Autonomous Community

Building Filters

392

Used processing and cutting in Spain

  • Trusted Seller
    2016 EQUIPLASTIC

    2016 EQUIPLASTIC

    • Manufacturer: EQUIPLASTIC

    Ref. 19020- USED EQUIPLASTIC from 2016, ROLL TO ROLL MODEL PEX FR 1100 FOR PRODUCTION OF FLAT GUSSETED BAGS ROLLS WITH SEALED AND PRE-CUT CARDBOARD CENTER. MINIMUM LENGTH 254MM. MAXIMUM LENGTH 2600MM.

    Sant Gregori, Spain
  • Trusted Seller
    TECDAKI sleever line with steam

    TECDAKI sleever line with steam tunnel GRAHAM

    • Manufacturer: Graham

    The Sleevtec300 shrink sleeving machine applies up to 300 sleeves per minute, for a minimum length of 20 mm, these sleeves can be warranty seals or decorative labels for bottles, cans and various containers, with...

    Lorquí, Spain
  • Trusted Seller
    2018 Starlinger RECOSTAR DYNAMIC 65

    2018 Starlinger RECOSTAR DYNAMIC 65 VAC

    • Manufacturer: Starlinger

    Ref. 16067- USED STARLINGER RECOSTAR DYNAMIC 65 VAC , year 2018 Manufacturer: STARLINGER Year: 2018 Conveyor belt metal detector Filter Cutting unit The machine has 9000 hours of working

    Sant Gregori, Spain
  • Trusted Seller
    1999 BOTTERO 352 BCS

    1999 BOTTERO 352 BCS

    • Manufacturer: Bottero
    • Model: 352 BCS

    6,000 x 3210 mm - Cutting table for monolithic glass (float), with tilting table top and glass cutting system. It is in very good condition. The table top has been replaced very recently.

    Valencia, Spain
  • Trusted Seller
    1999 Intertech Industries UB-617DF

    1999 Intertech Industries UB-617DF

    • Manufacturer: Intertech Industries

    Ref. 1051- USED INTERTECH INDUSTRIES LLC UB-617DF, year 1999 Manufacturer: INTERTECH INDUSTRIES LLC Year: 1999 Pinch bottom paper bag machine Cold and hot glue Cutting edge

    Sant Gregori, Spain
  • Trusted Seller
    2018 Kung Hsing KS-MH50+55 /

    2018 Kung Hsing KS-MH50+55 / 380V – 50HZ

    • Manufacturer: Kung Hsing

    Ref. 3070- USED KUNG HSING KS-MH50+55, YEAR 2018 Manufacturer: KUNG HSING PLASTIC MACHINERY CO Year: 2018 Rewinder: single automatic, diameter 900 mm Cutting system: automatic

    Sant Gregori, Spain
  • Trusted Seller
    2005 Cometsa Pack Shrink Wrap

    2005 Cometsa Pack Shrink Wrap Line

    • Manufacturer: Cometsa

    This shrink-wrap line wraps objects to be packaged with film. It is made up of an infeed conveyor, welding arc, discharge conveyor and shrink oven with cooling zone. It consists of a shrink-wrapper and tunnel. Sh...

    Lorquí, Spain
  • Trusted Seller
    Pelletizing extruder for pellets (pellets)

    Pelletizing extruder for pellets (pellets) P-130 RECYCLING AND PELLETIZINGPLASTIC PELLETIZING MACHINERY

    • Manufacturer: Munchy

    - Single screw - Special roller feed for film - Ø 160 filter changer - Water ring die face cutting with centrifugal dryer PLASTIC PELLETIZING MACHINERY Pelletizing extruder GESTER GT-5413 Model: PE YT-75 + info: ...

    Alicante, Spain
  • Trusted Seller
    2002 BOTTERO 352 BCS

    2002 BOTTERO 352 BCS

    • Manufacturer: Bottero
    • Model: 352 BCS

    3,650 x 2,750 mm - Automatic monolithic glass cutting table Shape cutting - Glass size 3,650 x 2,750 mm - Thickness 2-19 mm - Speed 120 m/min. - Accuracy +- 0.25 mm - Power 13 kW

    Valencia, Spain
  • Trusted Seller
    1995 Muncha P55A

    1995 Muncha P55A

    • Manufacturer: Muncha

    Ref. 16112- USED MUNCHA P55A, YEAR 1995 Manufacturer: MUNCHA Year: 1995 Regranulation and recycling machine Wet cutting Manual screen changer Separator Motor with smooth regulation Four heating zones Air cooling ...

    Sant Gregori, Spain
  • Trusted Seller
    2002 BOTTERO 543 LMT

    2002 BOTTERO 543 LMT

    • Manufacturer: Bottero
    • Model: 543

    Max Dimensions 6100x3300 mm Thickness 2-25 mm cutting Speed 160 m/min. (Cutting speed) Precision +- 0.15 mm With belts With air breakout table (With air chucks table and trimming)

    Valencia, Spain
  • Trusted Seller
    2013 Ngr S-GRAN 65-50

    2013 Ngr S-GRAN 65-50

    • Manufacturer: Ngr

    Ref. 16100- USED NGR S-GRAN 65-50, YEAR 2013 Manufacturer: NGR Year: 2013 2 atmospheric degassing ports 2 vacuum degassing ports Conveyor belt with metal detector Combination of shredder with extruder Cutting and...

    Sant Gregori, Spain
  • Trusted Seller
    1997 Mobert ROLLER 110-E/6M

    1997 Mobert ROLLER 110-E/6M

    • Manufacturer: MOBERT

    Ref. 19024- USED MOBERT ROLLER 110-E/6M from 1997 Manufacturer: MOBERT Year: 1997 Slit-weld unit with gusseting unit for 3 lanes included Machine is in running conditions Electric power 20Kw No of slit weld 2 Gus...

    Sant Gregori, Spain
  • Trusted Seller
    2015 Union TR100-38 TR50-30 TABLE

    2015 Union TR100-38 TR50-30 TABLE 1200

    • Manufacturer: Union

    Ref. 7006- USED EXTRUDER UNION TR100-38, YEAR 2015 Manufacturer: UNION Year: 2015 Main screw= 100 mm diameter Co-extruder screw= 50 mm Die model (L3-AS/CR 1150) = max. plate width 1150 mm Calander (FC 1200) Rolle...

    Sant Gregori, Spain
  • Trusted Seller
    1998 BAVELLONI K4

    1998 BAVELLONI K4

    • Manufacturer: Bavelloni

    Automatic miter saw in good working condition.

    Valencia, Spain
1314151617

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.