Processing » Spain

Search By Category

Search By Manufacturer

Search By Autonomous Community

Building Filters

125

Used force in Spain

  • Trusted Seller
    2007 ENGEL VICTORY VC 330

    2007 ENGEL VICTORY VC 330 / 120 TECH PRO

    • Manufacturer: Engel
    • Model: Victory

    Clamping force: 0kn | Daylight between platens max: 800 mm | Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm | Ejector force: 47 kN | Heating zones: 2 | Injection pressure: 2.180 / 2.400 bar | Injectio...

    Barcelona, Spain
  • Trusted Seller
    2007 ENGEL VICTORY VC 330

    2007 ENGEL VICTORY VC 330 / 120 TECH PRO

    • Manufacturer: Engel
    • Model: Victory

    Clamping force: 0kn | Daylight between platens max: 800 mm | Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm | Ejector force: 47 kN | Heating zones: 2 | Injection pressure: 2.175 bar | Injection volume...

    Barcelona, Spain
  • Trusted Seller
    2003 ENGEL VICTORY VC 330

    2003 ENGEL VICTORY VC 330 / 120 TECH PRO

    • Manufacturer: Engel
    • Model: Victory

    Clamping force: 0kn | Daylight between platens max: 800 mm | Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm | Ejector force: 47 kN | Heating zones: 2 | Injection pressure: 2.180 bar | Injection volume...

    Barcelona, Spain
  • Trusted Seller
    2009 ENGEL VICTORY 650H /

    2009 ENGEL VICTORY 650H / 200W / 200 COMBI

    • Manufacturer: Engel
    • Model: Victory

    Clamping force: 2.000 kN | Control: CC 200 | Dimensions (long x wide x high): 6.000 x 1.900 x 3.100 mm | Power: installed max: 37 kW | Screw diameter: 30 & 45 mm | Weight: 11.000 kg

    Barcelona, Spain
  • Trusted Seller
    1998 ARBURG 270S 350-150

    1998 ARBURG 270S 350-150

    • Manufacturer: Arburg

    Clamping force: 0kn | Injection pressure: 2.500 bar | Injection volume: 54 cm³ | Operating hours: 51.510 | Platen size (h x v): 472 x 472 mm | Screw diameter: 25 mm | Shot weight max: 45 g | Weight: 2.400 kg

    Barcelona, Spain
  • Trusted Seller
    2013 ENGEL VICTORY VC 1050

    2013 ENGEL VICTORY VC 1050 / 400 TECH PRO

    • Manufacturer: Engel
    • Model: Victory

    Clamping force: 0kn | Control: CC200 | Daylight between platens max: 1.450 mm | Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm | Ejector force: 96 kN | Injection pressure: 2.050 bar | Injection rate: ...

    Barcelona, Spain
  • Trusted Seller
    2003 LS LGH2500M

    2003 LS LGH2500M

    • Manufacturer: LS

    Screw diameter: 140 mm | Air valves: n/a | Cascades / sequential valve gates: n/a | Clamping force: 25.000 kN | Control: HICOM-5000 | Core pulls: n/a | Daylight between platens max: 3.600 mm | Dimensions (long x...

    Barcelona, Spain
  • Trusted Seller
    1997 ENGEL ES 5550 /

    1997 ENGEL ES 5550 / 800 DUO

    • Manufacturer: Engel

    Clamping force: 8000 kN | Core pulls: 5 | Dimensions (long x wide x high): 10.085 x 5.300 x 2.120 mm | Distance between tie-bars (h x v): 1.025 x 935 mm | Ejector stroke / force max.: 300 / - mm / kN | Injection...

    Barcelona, Spain
  • Trusted Seller
    2015 Union TR100-38 TR50-30 TABLE

    2015 Union TR100-38 TR50-30 TABLE 1200

    • Manufacturer: Union

    Ref. 7006- USED EXTRUDER UNION TR100-38, YEAR 2015 Manufacturer: UNION Year: 2015 Main screw= 100 mm diameter Co-extruder screw= 50 mm Die model (L3-AS/CR 1150) = max. plate width 1150 mm Calander (FC 1200) Rolle...

    Sant Gregori, Spain
  • Trusted Seller
    2010 KRAUSS MAFFEI KM 450-4500

    2010 KRAUSS MAFFEI KM 450-4500 CS PET

    • Manufacturer: Krauss-Maffei
    • Model: KM450-4500CS

    Clamping force: 4.500 kN | Distance between tie-bars h: 850 mm | Distance between tie-bars v: 740 mm | Injection pressure: 1.280 bar | Mould opening stroke max: 820 mm | Power: installed max: 390 kW | Screw diam...

    Barcelona, Spain
  • Trusted Seller
    2012 ENGEL E-MAX 440/100

    2012 ENGEL E-MAX 440/100

    • Manufacturer: Engel
    • Model: E-MAX 440100

    Clamping force: 1.000 kN | Daylight between platens max: 800 mm | Dimensions (long x wide x high): 4.000 x 1.300 x 1.900 mm | Distance between tie-bars (h x v): 460 x 410 mm | Dry cycle time: 1,8 / 320 sec/mm | ...

    Barcelona, Spain
  • Trusted Seller
    2013 ENGEL INSERT 80V /

    2013 ENGEL INSERT 80V / 60 ECO PRO

    • Manufacturer: Engel
    • Model: Insert

    Clamping force: 600 kN | Control: CC220 | Injection pressure: 2.060 bar | Injection rate: 78 cm³/s | Injection volume: 38 cm³ | Mould height max: 190 mm | Platen size (h x v): 910 x 400 mm | Screw diameter: 22 m...

    Barcelona, Spain
  • Trusted Seller
    2006 ENGEL INSERT 330 H

    2006 ENGEL INSERT 330 H / 70

    • Manufacturer: Engel
    • Model: Insert

    Clamping force: 700 kN | Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm | Injection pressure: 1.211 bar | Injection volume: 201 cm³ | Platen size (h x v): 590 x 340 mm | Screw diameter: 40 mm | Weight...

    Barcelona, Spain
  • Trusted Seller
    2005 FERROMATIK MV 350

    2005 FERROMATIK MV 350

    • Manufacturer: FERROMATIK

    Clamping force: 0kn | Distance between tie-bars (h x v): 710 x 710 mm | Injection pressure: 1.942 bar | Injection volume: 792 cm³ | Operating hours: 46.122 | Platen size (h x v): 982 x 997 mm | Power: installed ...

    Barcelona, Spain
  • Trusted Seller
    2019 FANUC ROBOSHOT Alpha S50iB

    2019 FANUC ROBOSHOT Alpha S50iB

    • Manufacturer: Fanuc
    • Model: Roboshot

    Distance between tie-bars (h x v): 360 x 320 mm | Ejector force: 5 / 20 (2.0tonf) / 70 kN | Injection volume: 24 cm³ | Platen size h: 500 mm | Platen size v: 470 mm | Power: installed max: 15.7 kW | Screw diame...

    Barcelona, Spain
45678

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.