Processing » Sweden

Building Filters

22

Used machine tools in Sweden

Trusted Seller
Kliklok Certiwrap C-80
- Manufacturer: Kliklok-Woodman
Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. ...
Ystad, Sweden
2014 Restatic Lightweight panel board machine
- Manufacturer: Restatic
Special custom made high volume machine to produce lightweight panels from paperboard directly from reels. Surface layer (furniture foil, melamine paper, felt, cotton, polyester, aluminium can be applied in the ...
Sweden
2020 Kaeser SK19 & Kyltork TB26 290751
- Manufacturer: Kaeser
- Model: SK 19
Capacity: 1700l/min | Feed pressure: 7,5bar | Turning speed: 2900rpm | Motor: 11kW | Length: 770mm | Width: 750mm | Height: 1000mm | Refigerated air dryier: Kaeser TB26 | Max pressure: 16bar | Vertical tank: 500l
Värnamo, Sweden
Trusted Seller
Traysealer Enterpack with Printer #2507
- Manufacturer: Enterpack
New potentiometer for speed control. Cleaned and adjusted air valves. Printer responds and runs but lacks ink. No vacuum, machine is used running on food grade gas. Tools: 195x150, 225x155 (oval), 230x190mm
$5,868 USD
Get financing
Est. $115/mo
Enköping, Sweden
Trusted Seller
MULTIVAC R245
- Manufacturer: Multivac
- Model: R245
Multivac R245 year of construction 2009. Mr labeling system, Built in vacuum pump, MAP machine whit gas mixing device 4x different tools as shown on pictures.
Ystad, Sweden
Trusted Seller
MULTIVAC R145
- Manufacturer: Multivac
- Model: R145
Multivac R145 Thermoformer year mod 2017 gas machine built-in vacuum pump 3x different mold sets, reel for waste plastic. Special tool ink knife for 3-edged cheese see pictures! Foil 462 mm. Tool No. 1. 2.1 480x1...
Ystad, Sweden
Trusted Seller
Traysealer Speedy V/G #2333
- Manufacturer: Ilpra
- Model: FOODPACK
Change oil, filter in vac pump. Adjusted tool. Straighten the big tool. Adjusted Weld plastic brake. Change a vacuum hose. Tool fabric: 260x160mm, 190x135mm
Enköping, Sweden
Trusted Seller
MULTIVAC R-140
- Manufacturer: Multivac
- Model: R140
Multivac R-140 thermoformer year of construction 2005 for both hard & soft film. Foil with 422 mm, Tool Advance 330 mm, Built in Busch 100cc vacuum pump, MAP machine, 4x different tool splittings. No 1. 2.4 1...
Ystad, Sweden
Trusted Seller
MULTIVAC R-245
- Manufacturer: Multivac
- Model: R245
Multivac R245 Thermoformer year of construction 2016 whit 4x different tool sizes. Built in Busch vacuum pump, Spinners for waste plastic, Foil width 462 mm, Advance 375 mm, Tools. 1x 1:1 425 x 332 mm Ma...
Ystad, Sweden
Trusted Seller
MULTIVAC R-530
- Manufacturer: Multivac
- Model: R530
Multivac R-530 thermoformer machine with updated control system, Built-in vacuum pump & associated vacuum cleaner for waste plastic. Foil width 422 mm 4-part tool dimensions 220 x 182 mm Max depth 145 mm.
Ystad, Sweden
Trusted Seller
Hajek VS 30L/355-100
- Manufacturer: Hajek
Hajek thermoforming machine with vacuum / gas built-in vacuum pump & elmoprinter date aggregate. Roller for spill plastic 4-part tool Dimensions 150 x 145 mm max depth 110 mm. Foil width 360 mm Rejection 340 mm. ...
Ystad, Sweden
Trusted Seller
Traysealer Tecnovac Olympia 210x140mm #2342
- Manufacturer: Tecnovac
Directed upper part. Refurbished plastic roller. Change the main switch. Adjusted circuit board for buttons. Change cover gasket. Change oil+filter in vac pump. Tool: 210x140mm
$3,627 USD
Enköping, Sweden
Trusted Seller
COLIMATIC THERA
- Manufacturer: Colimatic
Colimatic Thera 250 deep draw machine in new condition! Year model 2011 built-in vacuum pump Busch 63cc. Round tools with a diameter of 110 mm. Foil width 422 mm, rejection 170 mm Dimensions 345 x 100 cm H 190...
Ystad, Sweden
Trusted Seller
MULTIVAC R-530
- Manufacturer: Multivac
- Model: R530
MULTIVAC R-530 drafter with Mr labeling for top package. Foil width 622 mm, 2x bush vacuum pumps, reel, tool 2.1 36 x 26.5 cm, jumbo stand year of construction 2004. Dimensions 970 x 125 cm Height 200 cm.
Ystad, Sweden
Trusted Seller
COLIMATIC THERA 650
- Manufacturer: Colimatic
Colimatic Thera 650 Thermoformer year of construction 2000. 1x tool splitting 350 x 210 mm Maximum deep 150 mm. ideal for bygger products. Foil width 422mm.
Ystad, Sweden

12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.