Used processing in Tennessee, USA

Disa S-750 (7.5 hp) Dust Collector W/Barrels

Disa S-750 dust collector powered by a 208-230/460V/3-Phase 7.5 hp motor. (24) Beane filter bags produce 243 Sq. Ft. of Filter Media. Filters are in very good condition. 2,500 CFM @ 10.0″Wg-3,500 CFM @ 8.0″Wg-4,5...

Black Bros 22D-875 Adhesive Coater and Glue Spreader (Top/56″X7″Capacity/Variable Speed)

• Manufacturer: Black Bros
• Model: 22-D

This TOP ONLY Black Bros 22D-875 Adhesive Coater and Glue Spreader has a 56″ width capacity and a 7″ thickness capacity. It features a 1 hp motor with variable speed for the feed and a 2 hp motor for the glue and...

Laguna I|Flux: 5 Elite Dust Collector

• Manufacturer: Laguna

Production Level Cleaning The iFlux|5 Elite uses an appropriate filter arrangement with 286 square feet of surface area – double that of a typical 5HP collector. To do this, we used a smaller diameter bag, and a ...

Laguna T|Flux: 5 Cyclone Dust Collector

• Manufacturer: Laguna

The T|Flux series from Laguna starts to get serious. The Titan cyclones are geared towards clients who desire a single central unit for the entire shop. The T|Flux cyclones are equipped with a 10″ port that split...

Laguna SuperMax A|Flux: 12 Air Filter

• Manufacturer: Laguna

The A|Flux: 12 is designed to recycle all of the air in a 20′ x 20′ x 8′ space up to 22 times per hour at its highest speed. It includes one (1) outer washable electrostatic filter with an inner filter that captu...

Laguna C|Flux: 3 Dust Collector

• Manufacturer: Laguna
• Model: C|FLUX

For the popular C|Flux cyclone dust collectors, we’ve kept the user-friendly aspects of the previous generation while adding smart new features to improve the user experience. Among the upgrades is a dual-paddle ...

Rees C1030-6 (10 HP) 4000 CFM Dust Collector

This is a pretty straight forward affordable 4,000 CFM dust collector. It’s powered by a 10 hp (230/460V/3-Phase) fan with an 11″ inlet. (6) total discharge plastic bags on the bottom and (6) NEW American 24″ X 4...

Northtech NT TB1-1 1 HP Transfer Blower (Single Phase)

The NT TB1-1 1 HP Transfer Blower is a pneumatic conveyance system to transfer bulk waste away from the dust collector—often used in conjunction with a rotary feeder valve. This allows you to feed dust and debris...

Northtech NT-2ST-20XL-RAL 2-Stage 20 HP Dust Collector (w/ Rotary Air Lock)

Cutting, sanding, and shaping create large amounts of dust, shavings, and other waste that can cause severe health and safety issues if not dealt with properly. Insufficient and ineffective dust-collectors also a...

Northtech NT-DCSS Series 5-15 HP SOFT SOUND DUST COLLECTOR

This is the highest performance US built dust collector in it’s given CFM we can find WITH the largest storage capacity @ up to 550 gallons. Additionally unlike other dust collectors the storage bin pulls out the...

Northtech NT 2ST-15XL 2-Stage 15 HP Dust Collector

Cutting, sanding, and shaping create large amounts of dust, shavings, and other waste that can cause severe health and safety issues if not dealt with properly. Insufficient and ineffective dust-collectors also a...

Northtech NT 2ST-10XL 2-Stage 10 HP Dust Collector

Cutting, sanding, and shaping create large amounts of dust, shavings, and other waste that can cause severe health and safety issues if not dealt with properly. Insufficient and ineffective dust-collectors also a...

Northtech NT DC50 5 HP Dust Collector

This portable dust collector from Northtech has two (2) large 31” x 59” filter bags and two (2) 31” x 40” collection bags to efficiently separate and contain sawdust and chips. The 8″ inlet with included four (4)...

Northtech NT-DC30 3 HP Portable Dust Collector

This portable dust collector from Northtech has two (2) large 31” x 59” polyester filter bags up top with two (2) 31” x 40” collection bags below to efficiently separate and contain sawdust and chips. The 8″ inle...