Processing » Texas

Search By Category

Search By Manufacturer

Building Filters

691

Used controllers in Texas, USA

  • Trusted Seller
    Ruud 80% 75,000 BTU 2-Stage

    Ruud 80% 75,000 BTU 2-Stage Downflow Natural Gas Furnace - RGLE-07NBRKR Central Furnaces

    • Manufacturer: Ruud

    Standard Features Model No. RGLE-07NBRQR Features The Rheem Prestige Series™ Super Quiet 80™ Two Stage Downflow line of downflow gas furnaces is designed for installation in closets, alcoves, utility rooms, or at...

    $1,399 USD
    Chico, TX
  • Trusted Seller
    Water Maze Alpha-1500D Oil Water

    Water Maze Alpha-1500D Oil Water Separator With Ozone Generator COMPLETE! Oil-Water Separators

    • Manufacturer: Alpha

    “Excellent working condition!” COMPLETTE TURNKEY SYSTEM as pictured! S/N 11034010-160844 Operations Manual available upon request Water Maze ALPHA-1500D model is a highly effective above ground oil/water separato...

    $11,999 USD

    Get financing

    Est. $236/mo

    Chico, TX
  • EVCO S85

    EVCO S85

    • Manufacturer: Caterpillar

    Evco S85 powered by all mechanical Cat 4cyl diesel. Hydraulic powered hose reels, remote control panel and mounted on goose neck trailer. We just check this one out and it works well. Engine runs good, all contro...

    San Angelo, TX
  • ESCHER-WYSS ZDC-100 43025

    ESCHER-WYSS ZDC-100 43025

    • Manufacturer: ESCHER-WYSS

    S/N 2870; NEW 1984; COMPLETE W/DRIVE MOTOR, BACKDRIVE, VIBRATION PROTECTION, CIRC OIL SYS, & CONTROLS. ALCOHOL SVC; CONICAL BOWL DESIGN; (CYLINDER-65.5", 10 DEG, -53");

    Cleveland, TX
  • Trusted Seller
    1998 146 Ton Water-Cooled Chiller

    1998 146 Ton Water-Cooled Chiller

    • Manufacturer: Carrier
    • Model: 30 HXC

    This 146 Ton Water-Cooled Chiller with Semi-Hermitic Twin screw compressors and ComfortLink Controls is located in our facility in Dallas, TX. This unit has completed testing and is ready to ship to your location...

    Dallas, TX
  • Alfa Laval MRPX 418

    Alfa Laval MRPX 418

    • Manufacturer: Alfa-Laval
    • Model: MRPX 418

    Manufacturer: Alfa LavalModel: MRPX 418Capacity: 25.000 Litres/ HourMotor power: 37 kWBase plate included complete with tolls and control panel.

    Rosharon, TX
  • Trusted Seller
    2020 Liebert DS105A

    2020 Liebert DS105A

    • Manufacturer: Liebert - Vertiv

    The 2020 Liebert DS105A is a reliable data center cooling system specifically designed for efficient temperature and humidity control in critical environments. This refurbished unit is from Liebert, a trusted nam...

    Plano, TX
  • Trusted Seller
    Weldwire Tank Turning Rolls -

    Weldwire Tank Turning Rolls - New

    • Manufacturer: Weldwire Company of Texas

    30-TON TANK TURNING ROLLS NEW MADE BY WELDWIRE COMPANY Drive Item Specification Model WWRD-30 LOAD CAPACITY PER PIECE 30,000lbs. (15 ton) LOAD CAPACITY DRIVER & 1 IDLER 60,000lbs (30 ...

    South Houston, TX
  • Trusted Seller
    Auction
    2017 Metalcraft 4-Vessel 60 BBL

    2017 Metalcraft 4-Vessel 60 BBL Stainless Steel Brewhouse - Mash Mixer (Approx. 7'6" Diameter and

      2017 Metalcraft 4-Vessel 60 BBL Stainless Steel Brewhouse - Mash Mixer (Approx. 7'6" Diameter and 15'6" O.H.) - Lauter Tun (Approx. 11' Diameter and 15'6" O.H.) - Kettle (Approx. 8'6" Diameter and 15'6" O.H.) - W...

      Dallas, TX
      Visit Auction Website
    • CONTINENTAL GM80 50289

      CONTINENTAL GM80 50289

      • Manufacturer: Continental

      ULTRA FILTRATION SYSTEM; 53 SQ. FT.; 25 PSI @ 450 DEG. F;(7)3"DIA ROMICON MDLGM80, 20 ML FIBER CARTRIDGES; HAS ALL CONTROLS AND 1 HP PRICE CIRCULATION PUMP; MOUNTED ON SKID;

      Cleveland, TX
    • HEINKEL HF-800 100540

      HEINKEL HF-800 100540

      • Manufacturer: HEINKEL

      HORIZONTAL INVERTING; SIZE 800 MM; BUILT IN 1990; NO CONTROLS; WITH CYCLONE; FILLING QUANTITY MAX 1196/149KG; INNER BOWL DIA MAX 800; CENTRIFUGAL ACCELERATION MAX 1150; 60 HP MAIN DRIVE;

      Cleveland, TX
    • KETEMA CENTERSLUNG 101174

      KETEMA CENTERSLUNG 101174

      • Manufacturer: KETEMA

      XP CONTROLS; MODEL #MARK III; CAPACITY 4.8 CUBIC FEET; HASTELLOY TOP COVER; CARBON STEEL HOUSING; CARBON STEEL RUBBER COATED BASKET; SPARE BASKET #102060 AND TOP COVER #102061 AVAILABLE @ ADDITIONAL COST;

      Cleveland, TX
    • Trusted Seller
      New WeldWire 20-Ton Turning Rolls

      New WeldWire 20-Ton Turning Rolls

      • Manufacturer: Weldwire Company of Texas

      New WeldWire 20-Ton Turning Rolls Model: WWRD-20ST / WWRI-20ST Single Tire Model 40,000 Pound Capacity (1 Driver & 1 Idler) 6'' - 16' Diameter Range Rubber Tires : 15'' Diameter x 9'' Wide 0 - 56 IPM Variable S...

      South Houston, TX
    • Trusted Seller
      Koike Ransome 90-Ton Self Aligning

      Koike Ransome 90-Ton Self Aligning Turning Rolls

      • Manufacturer: Koike Aronson

      Used Koike Ransome 90-Ton Self Aligning Turning Rolls Model: SA90PR / SA45IR 180,000lb Capacity 18'' - 17ft Diameter Range 1.07'' - 42.8'' Variable Speed Range (Inches Per Minute) 20.5'' Diameter Wheels x 14'' W...

      South Houston, TX
    • Westfalia MSA 100-01-076

      Westfalia MSA 100-01-076

      • Manufacturer: GEA

      Msa 100-01-076Self cleaning bowl rated for 4500 RPM rated for 27,000 lbs per hr of milkComplete unit and has control panel

      Rosharon, TX
    1819202122

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.