Processing » Texas

Building Filters

52

Used stack in Texas, USA

  • Baxley 6 x 20 Lumber

    Baxley 6 x 20 Lumber Stacker

    • Manufacturer: Baxley

    Baxley Green Lumber Stacker - handles lumber up to 20 feet long. Uses 6 foot long stacking sticks and features automatic stick laying. Built on the Gillingham-Best design. Mechanically complete but NO CONTROLS.

    Timpson, TX
  • Trusted Seller
    350 Gallon Stainless Steel IBC

    350 Gallon Stainless Steel IBC Tank

      350 Gallon TranStore Stainless Steel IBC Tank - 3-way fork access for easy transport. Stack up to 3 high. - 22 1/2" diameter fill opening with gasket lid. 3" vent and 2" drain. - Sloped bottom for complete pro...

      $3,000 USD
      Mineral Wells, TX
    • Trusted Seller
      Heater Treater, Vertical, 6'x20', 75#

      Heater Treater, Vertical, 6'x20', 75#

      • Manufacturer: Challenger Process Systems

      Vertical 6x20 75# unused heater treater. All nozzles are threaded, with a 3" inlet and gas outlet. External 2"x4" water leg. Firetube is 16" with a 8" stack.

      $19,000 USD

      Get financing

      Est. $373/mo

      Texas, USA
    • WESTFALIA RTA140-02-576 92154

      WESTFALIA RTA140-02-576 92154

      • Manufacturer: GEA
      • Model: RTA

      WESTFALIA MODEL RTA 140-02-576 DISC SOLID BOWL SEPARATOR, 5000 RPM, 316SS BOWL AND COVER; TWO INCH INLET AND OUTLET, 21" OD DISK STACK;

      Cleveland, TX
    • WESTFALIA PA 756-00-32 102118

      WESTFALIA PA 756-00-32 102118

      • Manufacturer: GEA

      UNUSED GEA WESTFALIA CLARIFYING DECANTER WITH DISK STACK AND TWO GEAR DRIVE CENTRIFUGE; BUILT IN 2007; WITH FRAME, 224 KW DRIVE MOTOR AND BACK DRIVE; UNIT IS MISSING ROTATING ASSEMBLY;

      Cleveland, TX
    • Mercury Zerand 45" Web-fed Platen

      Mercury Zerand 45" Web-fed Platen Die Cutter

      • Manufacturer: Mercury

      44" Maximum Width X 36" Long Zerand 60” Turret Unwind, Decurling Roll Stand Backstand, GWD Web Guide, Intermediate Roll Clamp, Takeaway Conveyor, Stacking Table, 27" x 17" Trim Removal Belt Conveyor include die ...

      Dallas, TX
    • HEATERS/INCINERATORS/OVENS 94202

      HEATERS/INCINERATORS/OVENS 94202

      • Manufacturer: ECONO-THERM

      "AS IS, WHERE, IS"; S/U HEATER; MFG. BY ECONO-THERM; 2750 PSIG @ 950 DEG. F.; 111'0" O.A.H.; 59'8" STACK SECTION; 33'3" FURNACE SECTION; 11'5" I.D. FURNACE SECTION WITH 10'6" I.D. LINING; REACTORY LINED;

      Cleveland, TX
    • MARLEY (SPX) NC8413XS5GGF 114501

      MARLEY (SPX) NC8413XS5GGF 114501

      • Manufacturer: MARLEY (SPX)

      Used 880 Ton Double Stacked Marley (SPX) Cooling Tower. Model #NC8413XS5GGF. 2651 gpm capacity. Galvanize material. 100 hp fan drive rating. Size 22'6" long. Built in 2015. Previous Service: US-01-902-CPM-0001 A ...

      Cleveland, TX
    • MARLEY (SPX) NC8413XS5GGF 114502

      MARLEY (SPX) NC8413XS5GGF 114502

      • Manufacturer: MARLEY (SPX)

      Used 880 Ton Double Stacked Marley (SPX) Cooling Tower. Model #NC8413XS5GGF. 2651 gpm capacity. Galvanize material. 100 hp fan drive rating. Size 22'6" long. Built in 2015. Previous Service: US-01-902-CPM-0001 B ...

      Cleveland, TX
    • MARLEY (SPX) NC8413XS5GGF 114504

      MARLEY (SPX) NC8413XS5GGF 114504

      • Manufacturer: MARLEY (SPX)

      Used 880 Ton Double Stacked Marley (SPX) Cooling Tower. Model #NC8413XS5GGF. 2651 gpm capacity. Galvanize material. 100 hp fan drive rating. Size 22'6" long. Built in 2015. Previous Service: US-01-902-CPM-0001 D ...

      Cleveland, TX
    • MARLEY (SPX) NC8413XS5GGF 114503

      MARLEY (SPX) NC8413XS5GGF 114503

      • Manufacturer: MARLEY (SPX)

      Used 880 Ton Double Stacked Marley (SPX) Cooling Tower. Model #NC8413XS5GGF. 2651 gpm capacity. Galvanize material. 100 hp fan drive rating. Size 22'6" long. Built in 2015. Previous Service: US-01-902-CPM-0001 C ...

      Cleveland, TX
    • MARLEY (SPX) NC8413XS5GGF 114505

      MARLEY (SPX) NC8413XS5GGF 114505

      • Manufacturer: MARLEY (SPX)

      Used 880 Ton Double Stacked Marley (SPX) Cooling Tower. Model #NC8413XS5GGF. 2651 gpm capacity. Galvanize material. 100 hp fan drive rating. Size 22'6" long. Built in 2015. Previous Service: US-01-902-CPM-0001 E ...

      Cleveland, TX
    • EVAPCO EDX 21401424 112792

      EVAPCO EDX 21401424 112792

      • Manufacturer: EVAPCO

      Used Evapco 850 ton cooling tower. Model number EDX 214 1424. Induced draft crossflow. 304 Stainless basin and galvanized casing. Built in 2002. Double stacked. Shipping Dimensions: Top 22'L x 13'8"W x 9'5"H; Bo...

      Cleveland, TX
    • EVAPCO EDX 21401424 112793

      EVAPCO EDX 21401424 112793

      • Manufacturer: EVAPCO

      Used Evapco 850 ton cooling tower. Model number EDX 214 1424. Induced draft crossflow. 304 Stainless basin and galvanized casing. Built in 2002. Double stacked. Shipping: Top 22'L x 13'8"W x 9'5"H; Bottom 22'L x...

      Cleveland, TX
    • PROCESS UNITS/LINES 102159

      PROCESS UNITS/LINES 102159

      • Manufacturer: THERMATRIX

      140 SCFM @ 30 BTU/SCF; CS; STANDARD ELECTRIC STRAIGHT THROUGH THERMAL OXIDIZER; MFG. BY THERMATRIX IN 2003; MODEL ES-100; MAXIMUM FLOW RATE FOR A LEAN FUME STREAM (VOC) IS 85 SCFM (AT 0 BTU/SCF) AND IS CAPABLE OF...

      Cleveland, TX
    1234

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.