Processing » Texas

Search By Category

Search By Manufacturer

Building Filters

441

Used frames in Texas, USA

  • MIXMOR AGITATOR

    MIXMOR AGITATOR

    • Manufacturer: MixMor

    ONE (1) USED CLAMP ON AGITATOR; MFG. MIXMOR; MODEL G-34; SN: 68863-1; SHAFT: 3/4" X 5-0'; TWO SETS OF 3 BLADE TURBINE IMPELLERS; MOTOR: 2 H.P. BALDOR; VOLTS: 208-230/460; AMPS: 6.5-6/3; RPM: 1735; FRAME: 56C; PHA...

    Houston, TX
  • DRYER, ELECTRIC-SCRU, 14'' X 15',

    DRYER, ELECTRIC-SCRU, 14'' X 15', 2-SCREW, 316SS, THERMAFLITE, ESD14-15-VAR, 150KW, 1200DEG F [3]

    • Manufacturer: Therma-Flite

    DRYER, ELECTRIC-SCRU, 14'' X 15', 2-SCREW, 316SS, THERMAFLITE, ESD14-15-VAR, 150KW, 1200DEG F [3] Includes NEMA4X controls, Commutator slip ring assembly applies power to each rotor. Manuals & documentation. Supp...

    Alvin, TX
  • LIGHTNIN AGITATOR

    LIGHTNIN AGITATOR

    • Manufacturer: Lightnin

    ONE (1) USED LIGHTNIN AGITATOR; MODEL: 72Q7.5; RATIO: 6.43 ; RPM IN: 272; CARBON STEEL SHAFT; SHAFT: 2.5" DIA. AT FLANGE REDUCING TO 2.0"; 10" DIA. MOUNTING FLANGE: MOTOR 7.5 HP RELIANCE; 1765 RPM; 460 VOLTS; 9.4...

    Houston, TX
  • REACTOR

    REACTOR

    • Manufacturer: C.H.H. ENTERPRISES, INC.

    MFG. BY C.H.H. ENTERPRISES, INC.; OLD OCEAN, TX; 1997; NB: 9; PRESS: 427 PSI @ 356F; SS/316L CLAD INTERNALLY; JKT; 142 PSI @ 356F; AGITATOR: PRO QUIP; DRIVEN BY 60 HP MOTOR; 1780 RPM IN; 460 VOLTS; FRA...

    Houston, TX
  • Trusted Seller
    DOUBLE SIGMA

    DOUBLE SIGMA

    • Manufacturer: Sigma

    The BME DSM Double Sigma Mixer is designed for efficient mixing of doughs, ensuring a homogeneous mass in minimal time. It features a Double Sigma design and boasts an open sanitary frame, simplifying cleaning an...

    Houston, TX
  • WITTE DRYER AIR HEATER, 2MM

    WITTE DRYER AIR HEATER, 2MM BTU HR, 400DEG F, 15000CFM, UNUSED

    • Manufacturer: WITTE

    HOT AIR HEATER, 2MM BTU.HR, 400°F, 15000CFM, GAS, HORIZONTAL, UNUSED. Yr.2008 combustion air package on steel support frame. With gas mgmt system & Controls. Burner gas train, piping & controls, safety shut offs....

    Houston, TX
  • REACTOR (AGIT)

    REACTOR (AGIT)

    • Manufacturer: Wyatt Industries

    ONE (1) SURPLUS REACTOR; MFG: WYATT INDUSTRIES; ASME CODE STAMPED; YR: 1963; SN: 63-D-716; 660 PIS @ 350F; INTERNALLY; 135 PSI @ 325F JACKET; AGITATOR: 3 HP; 17:31 RATIO; 100 RPM OUT; SN: 8938344801; ...

    Houston, TX
  • PUMP, CENTRIFUGAL, 3 X 3

    PUMP, CENTRIFUGAL, 3 X 3 X 7, CROWN MDL.B30-7X, SELF PRIMING, 100GPM, 60'HD, DI, 3HP, HORIZONTAL

    • Manufacturer: Crown

    PUMP, CENTRIFUGAL, 3 X 3 X 7, CROWN MDL.B30-7X, SELF PRIMING, 100GPM, 60'HD, DI, 3HP, HORIZONTAL Centerline supported casing. Single mechanical seal or similar, Carbon or tungsten face. Designed for a Fulton ther...

    Alvin, TX
  • ANDRITZ SB7700 112056

    ANDRITZ SB7700 112056

    • Manufacturer: Andritz
    • Model: SB7700

    UNUSED ANDRITZ SEPARATION TYPE SB7700 SUPER DUPLEX STAINLESS STEEL SCREEN BOWL DECANTER CENTRIFUGE; THROUGHPUT CAPACITY RATED BETWEEN 40-80 TON PER HOUR (DEPENDING ON PRODUCT); HAS SINGLE LEAD CONVEYOR, 360 DEGRE...

    Cleveland, TX
  • ANDRITZ SB7700 112048

    ANDRITZ SB7700 112048

    • Manufacturer: Andritz
    • Model: SB7700

    UNUSED ANDRITZ SEPARATION TYPE SB7700 316L STAINLESS STEEL SCREEN BOWL DECANTER CENTRIFUGE; THROUGHPUT CAPACITY RATED BETWEEN 40-80 TON PER HOUR (DEPENDING ON PRODUCT); HAS SINGLE LEAD CONVEYOR, 360 DEGREE DISCHA...

    Cleveland, TX
  • ANDRITZ SB7700 112047

    ANDRITZ SB7700 112047

    • Manufacturer: Andritz
    • Model: SB7700

    UNUSED ANDRITZ SEPARATION TYPE SB7700 316L STAINLESS STEEL SCREEN BOWL DECANTER CENTRIFUGE; THROUGHPUT CAPACITY RATED BETWEEN 40-80 TON PER HOUR (DEPENDING ON PRODUCT); HAS SINGLE LEAD CONVEYOR, 360 DEGREE DISCHA...

    Cleveland, TX
  • I/R 2CV34M3 81077

    I/R 2CV34M3 81077

    • Manufacturer: I/R

    BUILT IN 1993; BAROMETRIC PRESSURE 14.17 PSIA; INLET 13.87 @ 100 DEG F; RELATIVE HUMIDITY 90%; DISCHARGE 125 PSIG; MOTOR: SIEMENS INDUCTION DRIVE; 800 HP; 3580 RPM; 4160 VOLTS; 95 AMPS; CONT. DUTY; TYPE CGZF; ...

    Cleveland, TX
  • ANDRITZ SB7700 112054

    ANDRITZ SB7700 112054

    • Manufacturer: Andritz
    • Model: SB7700

    UNUSED ANDRITZ SEPARATION TYPE SB7700 SUPER DUPLEX STAINLESS STEEL SCREEN BOWL DECANTER CENTRIFUGE; THROUGHPUT CAPACITY RATED BETWEEN 40-80 TON PER HOUR (DEPENDING ON PRODUCT); HAS SINGLE LEAD CONVEYOR, 360 DEGRE...

    Cleveland, TX
  • ANDRITZ SB7700 112055

    ANDRITZ SB7700 112055

    • Manufacturer: Andritz
    • Model: SB7700

    UNUSED ANDRITZ SEPARATION TYPE SB7700 SUPER DUPLEX STAINLESS STEEL SCREEN BOWL DECANTER CENTRIFUGE; THROUGHPUT CAPACITY RATED BETWEEN 40-80 TON PER HOUR (DEPENDING ON PRODUCT); HAS SINGLE LEAD CONVEYOR, 360 DEGRE...

    Cleveland, TX
  • ANDRITZ SB7700 112052

    ANDRITZ SB7700 112052

    • Manufacturer: Andritz
    • Model: SB7700

    UNUSED ANDRITZ SEPARATION TYPE SB7700 SUPER DUPLEX STAINLESS STEEL SCREEN BOWL DECANTER CENTRIFUGE; THROUGHPUT CAPACITY RATED BETWEEN 40-80 TON PER HOUR (DEPENDING ON PRODUCT); HAS SINGLE LEAD CONVEYOR, 360 DEGRE...

    Cleveland, TX
2021222324

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.