Processing » Texas

Building Filters

54

Used semitool in Texas, USA

  • REACTOR, 640 GAL, INC.625 CLAD,

    REACTOR, 640 GAL, INC.625 CLAD, 1800#INTERNAL, 75#JKT, 50HP

    • Manufacturer: Nooter

    REACTOR, 750 GAL, GL, FV100#INT, 90#JKT, 5HP Shell-length: 4'5" T/T | Prior service: Chemical. Used for test run only, under 30days.. | Pressure-shell: 1800# | Shell-diameter: 5' ID | Agitator-hp/rpm: 50HP, 3/60/...

    Alvin, TX
  • FILTER, PLATE, 1200MM, POLY, 1463SQ.FT,

    FILTER, PLATE, 1200MM, POLY, 1463SQ.FT, 93.1CF, HYD, DURCO, MEMBRANE, SHIFTER

    • Manufacturer: Durco

    FILTER, PLATE, 1200MM, POLY, 1463SQ.FT, 93.1CF, HYD, DURCO, MEMBRANE, SHIFTER. 68 chambers. 66 Membrane Intermediate plates, 1 Head Plate, 1 End Plate. 225# membrane pressure. Automatic core blow [air]. Plates to...

    Alvin, TX
  • Trusted Seller
    Palletized Drum & IBC /

    Palletized Drum & IBC / Tote Filler

    • Manufacturer: Unknown

    The most versatile and widely accepted filling machine is this palletized drum and IBC/tote filler. It is both a top and sub-surface liquid filling machine for filling a pallet of drums or a single IBC/tote rangi...

    Houston, TX
  • Copeland Low Temp Freon compressor

    Copeland Low Temp Freon compressor : Model 4RR1-300L-TSK Item # C77780

    • Manufacturer: Copeland

    Copeland Low temp Semi hermetics – compressor – Model 4RR1-300L-TSK REBUILT surplus Copeland Low temp Semi hermetics – compressor – Model 4RR1-300L-TSK REBUILT surplus

    Houston, TX
  • Trusted Seller
    1998 146 Ton Water-Cooled Chiller

    1998 146 Ton Water-Cooled Chiller

    • Manufacturer: Carrier
    • Model: 30 HXC

    This 146 Ton Water-Cooled Chiller with Semi-Hermitic Twin screw compressors and ComfortLink Controls is located in our facility in Dallas, TX. This unit has completed testing and is ready to ship to your location...

    Dallas, TX
  • Appleton S200

    Appleton S200

    • Manufacturer: Appleton
    • Model: S200

    Used 153" long Appleton semi-automatic core cutter Model no. S200 Serial no. 121288 3" DIA. Shaft 460 volt, 3 phase, 60 cycle

    Cypress, TX
  • BLENDER, ROTARY, 108CF, STURTEVANT, 304SS,

    BLENDER, ROTARY, 108CF, STURTEVANT, 304SS, 20HP

    • Manufacturer: Sturtevant

    BLENDER, ROTARY, 108CF, STURTEVANT, 304SS, 20HP Outboard bearings. Trunnion feed. On base with trunnions & rollers. Used in dry or semi-dry applications. Blend cycle approx. 2-5 mins. New drive, bearings, controls.

    Alvin, TX
  • Trusted Seller
    HeatCraft BDT1500L6C

    HeatCraft BDT1500L6C

    • Manufacturer: HeatCraft

    The HeatCraft BDT1500L6C is a versatile air-cooled condensing unit designed for medium or low temperature applications. Equipped with either Copeland or Bitzer Semi-Hermetic reciprocating or Scroll compressors, t...

    Houston, TX
  • Trusted Seller
    Air Operated Lid Press

    Air Operated Lid Press

    • Manufacturer: Unknown

    This is a handy item to assure your operators are safe when putting plastic lids onto open-mouth pails. It also speeds up the process and prevents damage to pails and lids. The item shown is a semi-automatic, air...

    Houston, TX
  • Trusted Seller
    KOTOHIRA KSC-Z02-100 FUME SMOKE EXTRACTOR

    KOTOHIRA KSC-Z02-100 FUME SMOKE EXTRACTOR

    • Manufacturer: KOTOHIRA

    Checked out OK, you are buying the unit pictured. Please note: PotentioMeter cap is broken & scratches on small chassis. Includes: (1) Prefilter (1) 0.3 MicroMeter Semi Hope Filter (1) and Activated Carbon Filter...

    $300 USD
    El Paso, TX
  • Trusted Seller
    [FP-70]: 2.5 CuFt JWI Filter

    [FP-70]: 2.5 CuFt JWI Filter Press w/630mm Plates

    • Manufacturer: US Filter / JWI

    [FP-70]: 2.5 Cu Ft JWI Filter Press w/630mm Plates Brand : JWI Filter Press Total Volume : 2.5 cubic ft Filtering Area : 58 square ft Center Feed / Corner Discharge Plates : (1) Head Plate, (1) Tail Plate, (...

    San Antonio, TX
  • Trusted Seller
    [FP-62]: 40 CuFt Pacific Press

    [FP-62]: 40 CuFt Pacific Press Co. Filter Press w/1000mm Plates

    • Manufacturer: Pacific

    [FP-62] : Used 40 Cu Ft Pacific Filter Press Brand: Pacific Press Co. Model: P1000E132A-40155RCR Total Volume: 39.84 cubic feet Filtering Area: 816.48 Max Pressure: 100 PSI Closure Device: Electric powered ...

    San Antonio, TX
  • Trusted Seller
    Hydrogen/Helium Purifier Skid Assembly –

    Hydrogen/Helium Purifier Skid Assembly – Air Liquide GH2 450/650 – 26,000 SCFH with Regenerative Gas Dryer & Hydrogen Feed Compressor

    • Manufacturer: Air Liquide

    This high-capacity hydrogen purification skid is a fully integrated, turnkey solution for industrial hydrogen production, fuel cell hydrogen supply, refinery operations, and chemical plant gas conditioning. Built...

    Dallas, TX
  • Trusted Seller
    Process Engineering 20,000 Gallon Liquid

    Process Engineering 20,000 Gallon Liquid Nitrogen Cryogenic Storage Tank – 150 PSI – Horizontal Vacuum Insulated

    • Manufacturer: Process Engineering Inc.

    This Process Engineering 20,000 Gallon Liquid Nitrogen Cryogenic Storage Tank is a heavy-duty, horizontal bulk storage vessel engineered for long-term, high-capacity LN2 storage. Designed with a double-walled, va...

    Dallas, TX
  • Trusted Seller
    ABSAL Helium Refrigerated Liquid ISO

    ABSAL Helium Refrigerated Liquid ISO Tank – 1800 Gallons – 175 PSI

    • Manufacturer: ABSAL / Air Liquide

    This ABSAL Helium Refrigerated Liquid ISO Tank provides a reliable and efficient solution for the transportation and storage of cryogenic helium. Designed to meet industrial and research-grade requirements, the u...

    Dallas, TX
1234

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.