Processing » Texas

Search By Category

Search By Manufacturer

Building Filters

709

Used controllers in Texas, USA

  • Trusted Seller
    AMETEK NT2-24D ALARM T261968

    AMETEK NT2-24D ALARM T261968

    • Manufacturer: AMETEK Powervar

    DECIBEL OUTPUT: 88 DB AT 10 FEET, 16 FIELD SELECTABLE TONES, 4 VOLTAGES TO CHOOSE, FLUSH PANEL OR WALL MOUNT, VOLUME CONTROL, 0.05 AMPERE, 24 VDC

    $592 USD
    El Paso, TX
  • Trusted Seller
    2004 Hydro-Chem SMR 80,000 scfh

    2004 Hydro-Chem SMR 80,000 scfh

    • Manufacturer: Hydro-Chem

    Hydro-Chem hydrogen gas plant. Capacity 1.9 MMSCFD (80,000 scfh or 2100 Nm3/hr). Built 2004, in operation until 2021. Was idled with nitrogen blanket on gas side until removed in 2021. Has 20 tube reformer (t...

    Texas, USA
  • Trusted Seller
    Sharples P 4600

    Sharples P 4600

    • Manufacturer: Sharples

    Used As-Is and Where-Is Sharples P 4600 Available As is or Remanufacture. 75 HP Electric Main Drive Motor Explosion Proof Controls Mounted on Skid Mounted on a carbon steel frame. Purchasing Party is respo...

    Texas, USA
  • Trusted Seller
    IR Ingersoll Rand Air Compressor

    IR Ingersoll Rand Air Compressor

    • Manufacturer: Ingersoll Rand
    • Model: R160I

    200 Horsepower Air Compressor, Available Immediately, Warranty available - Robust Cast Iron IP55, 380V ~ 415V/3PH/50HZ motor - Rugged Ingersoll Rand airend with duplex tapered roller bearings - No maintenance in...

    $22,500 USD

    Get financing

    Est. $423/mo

    El Paso, TX
  • ALFA LAVAL BDPX-718CGV-15CER 114508

    ALFA LAVAL BDPX-718CGV-15CER 114508

    • Manufacturer: Alfa-Laval

    "As is, Where is" Unused Inert Gas Unit for Glycerin Removal, solids-ejecting high capacity disc stack centrifuge, Mfg. by Alfa Laval. Type BD-95, Model #BDPX-718CGV-15CER. All product-wetted parts are in high gr...

    Cleveland, TX
  • ALFA LAVAL BDPX-718CGV-15CER 114506

    ALFA LAVAL BDPX-718CGV-15CER 114506

    • Manufacturer: Alfa-Laval

    "As is, Where is" Unused Inert Gas Unit for Glycerin Removal, solids-ejecting high capacity disc stack centrifuge, Mfg. by Alfa Laval. Type BD-95, Model #BDPX-718CGV-15CER. All product-wetted parts are in high gr...

    Cleveland, TX
  • ALFA LAVAL BDPX-718CGV-15CER 114507

    ALFA LAVAL BDPX-718CGV-15CER 114507

    • Manufacturer: Alfa-Laval

    "As is, Where is" Unused Inert Gas Unit for Glycerin Removal, solids-ejecting high capacity disc stack centrifuge, Mfg. by Alfa Laval. Type BD-95, Model #BDPX-718CGV-15CER. All product-wetted parts are in high gr...

    Cleveland, TX
  • ALFA LAVAL BDPX-718CGV-15CER 114509

    ALFA LAVAL BDPX-718CGV-15CER 114509

    • Manufacturer: Alfa-Laval

    "As is, Where is" Unused Inert Gas Unit for Glycerin Removal, solids-ejecting high capacity disc stack centrifuge, Mfg. by Alfa Laval. Type BD-95, Model #BDPX-718CGV-15CER. All product-wetted parts are in high gr...

    Cleveland, TX
  • Trusted Seller
    Chaffee Rotor Sealer Model CBV-DT

    Chaffee Rotor Sealer Model CBV-DT Sealers & Sealing Machines

    • Manufacturer: Chaffee

    “In good condition.” Chaffee Rotor Sealer Model CB-V is a water-cooled variable speed rotary band heat sealer intended for use on plastic bags and films. It is used for bag top closing in production packaging ope...

    $3,499 USD
    Chico, TX
  • Trusted Seller
    [RE-122]: Used 5000Amp (50Out)(480In)Volt Dynapower

    [RE-122]: Used 5000Amp (50Out)(480In)Volt Dynapower Brand Rectifier (2 of 2)

    • Manufacturer: Dynapower

    [RE-122]: Used 5000Amp (50Out)(480In)Volt Dynapower Brand Rectifier Brand: Dynapower Model: SD42-05000502-GKLX-MP69 Serial: 990056 Control: No Remote Water-Cooled Three Phase Volts In: 480 Amps In: 392 Volts ...

    $27,000 USD

    Get financing

    Est. $508/mo

    San Antonio, TX
  • Trusted Seller
    RE-106 Used 150A 110V Aldonex

    RE-106 Used 150A 110V Aldonex Rectifier

    • Manufacturer: Aldonex

    [RE-106]: Used 150A 110V Aldonex Brand Rectifier Brand: Aldonex Model: T-120-1.5CF-CCV Serial: 2035982 Control: Air - Cooled One Phase Volts In: 110 Amps In: 45 Volts Out: 20 Amps Out: 150 Hz In.: 60 Type: ...

    $4,900 USD
    San Antonio, TX
  • Trusted Seller
    [RE-50] : New 1,000A 30V

    [RE-50] : New 1,000A 30V Dynapower 480 SINGLE PHASE Rectifier

    • Manufacturer: Dynapower
    • Phase type: Single-phase

    [RE-50] : NEW/ Unused *1000* amp 30 volt *Dynapower Brand* DC Rectifier Brand : Dynapower Model : 1000 amp at 30 volt anodizing rectifier Serial : 83003-011-001 Control: Remote Water-Cooled Single Phase Volts...

    $10,350 USD

    Get financing

    Est. $203/mo

    San Antonio, TX
  • Trusted Seller
    [RE-102]: Used 5000Amp (50Out)(480In)Volt Dynapower

    [RE-102]: Used 5000Amp (50Out)(480In)Volt Dynapower Brand Rectifier (1 of 2)

    • Manufacturer: Dynapower

    [RE-102]: Used 5000Amp (50Out)(480In)Volt Dynapower Brand Rectifier Brand: Dynapower Model: SD42-05000502-GKLX-MP69 Serial: 990055 Control: No Remote Air-Cooled Three Phase Volts In: 480 Amps In: 392 Volts Ou...

    $27,000 USD

    Get financing

    Est. $508/mo

    San Antonio, TX
  • DRYER, ROTARY DEHYDRATOR, DUSKE, 11'

    DRYER, ROTARY DEHYDRATOR, DUSKE, 11' X 38', CS, 1-PASS, GAS FIRED

    • Manufacturer: DRYER,

    DRYER, ROTARY DEHYDRATOR, DUSKE, 11' X 38', CS, 1-PASS, GAS FIRED Rotary drum Dehydrator, Mfd. Duske, Mdl. SPD-8000, Yr. 2011. CS drum, 11'dia x 38' long, w/internal lifters, single pass. LP Gas fired w/refrac...

    Texas, USA
  • Metso Wet Lap

    Metso Wet Lap

    • Manufacturer: Metso

    122" (3.1M) Twin Wire Wetlap Machine with modified Headbox in 2018 rated 232 BDTPD Right Hand Output Lamb-Grays Harbor Cutter Layboy Sheeter 232 BDTPD (9.7 BDTPH Per Hour) Nip One: 300 PLI Nip Two: 450 PLI Nip T...

    Cypress, TX
3233343536

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.