Processing » Texas

Building Filters

16

Used gear machine in Texas, USA

  • Trusted Seller
    B&P LittleFord LLC-PLOW BLENDER/MIXER WITH

    B&P LittleFord LLC-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR

    • Manufacturer: Falk

    B&P LITTLEFORD LLC-PLOW BLENDER/MIXER Two choppers, no nameplate, no jacket, center outlet bottom nozzle, connected to an electric motor (no nameplate) and a Falk gear box, input speed, output speed GEAR DRIVE: D...

    Houston, TX
  • Trusted Seller
    AMERICAN PROCESS SYSTEMS-PLOW BLENDER/MIXER WITH

    AMERICAN PROCESS SYSTEMS-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR

    • Manufacturer: Falk

    AMERICAN PROCESS SYSTEMS-PLOW BLENDER/MIXER Two choppers, no nameplate, no jacket, center outlet bottom nozzle, connected to an electric motor (no nameplate) and a Falk gear box, input speed, output speed GEAR DR...

    Houston, TX
  • Trusted Seller
    BABCOCK GARDNER LTD.-PLOW BLENDER/MIXER WITH

    BABCOCK GARDNER LTD.-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR

    • Manufacturer: Babcock Gardner

    BABCOCK GARDNER LTD.-PLOW BLENDER/MIXER No jacket, center outlet bottom nozzle, control panel included DIMENSIONS: CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change a...

    Houston, TX
  • Trusted Seller
    Andritz Pellet Mill

    Andritz Pellet Mill

    • Manufacturer: Andritz

    New or used, we can find it for you! Designed for continuous operation and manufactured in extra-heavy construction. Pellet mills consisting of a pelleting chamber with pellet die, rolls assemblies and cutter kni...

    Fort Worth, TX
  • Trusted Seller
    Bliss Pellet Mill

    Bliss Pellet Mill

    • Manufacturer: Bliss

    New or used, we can find it for you! Designed for continuous operation and manufactured in extra-heavy construction. Pellet mills consisting of a pelleting chamber with pellet die, rolls assemblies and cutter kni...

    Fort Worth, TX
  • Trusted Seller
    CPM Pellet Mill

    CPM Pellet Mill

    • Manufacturer: CPM

    New or used, we can find it for you! Designed for continuous operation and manufactured in extra-heavy construction. Pellet mills consisting of a pelleting chamber with pellet die, rolls assemblies and cutter kni...

    Fort Worth, TX
  • Metso Wet Lap

    Metso Wet Lap

    • Manufacturer: Metso

    122" (3.1M) Twin Wire Wetlap Machine with modified Headbox in 2018 rated 232 BDTPD Right Hand Output Lamb-Grays Harbor Cutter Layboy Sheeter 232 BDTPD (9.7 BDTPH Per Hour) Nip One: 300 PLI Nip Two: 450 PLI Nip T...

    Cypress, TX
  • BLENDER, DBL.CONE, 5CF, 304SS, 1.5HP,

    BLENDER, DBL.CONE, 5CF, 304SS, 1.5HP, NO BAR

    • Manufacturer: GEMCO. General Machine Co., NJ.

    BLENDER, DBL.CONE, 5CF, 304SS, 1.5HP, NO BAR Packaged on tubular steel stands with controls, actuators, limit switches, jog/positioning drive. (1½HP, 3/60/208-230-460V w/SM Cyclo Gear,11:1ratio, w/clutch) Cone cl...

    Alvin, TX
  • Trusted Seller
    Alfa Laval B214A

    Alfa Laval B214A

    • Manufacturer: Alfa-Laval
    • Model: B-214

    Alfa Laval B214A centrifuge. The complete unit will be reconditioned, balanced, new seals/bearings, painted. Photo shows machine prior to reconditioning - allow 4 to 6 weeks delivery. Reconditioning includes, c...

    Houston, TX
  • Trusted Seller
    1984 Sharples PM75000

    1984 Sharples PM75000

    • Manufacturer: Sharples
    • Model: PM75000

    Sharples PM75000 Decanter - (2) Units available. RECONDITIONED - WARRANTY. Rated at 270 gpm. CENTRIFUGE 29 inch x 92 inch with Gear Units, (95 to 1). Material stainless steel ss316/ss317. Max bowl speed 2600 R...

    Texas, USA
  • 2001 Bowen 2.5

    2001 Bowen 2.5

    • Manufacturer: Bowen

    This is a used/refurbished Bowen 2.5 unit built by Precision Pump on 12-13-2001, powered by a Cummins BT 3.9 diesel engine s/n: 46082450. Hour meter shows 3301. We replaced the engine belt tensioner, belt and s...

    San Angelo, TX
  • Trusted Seller
    2011 Gardner Denver PAH 5k

    2011 Gardner Denver PAH 5k Triplex Well Service Pump Skid

    • Manufacturer: Gardner Denver

    2011 Gardner Denver PAH Triplex Well Service Pump Skid - Gardner Denver PAH Triplex Pump - 5” Pistons and Liners - Detroit Diesel Series 60, 12.7L - Serial 06RE130583, (Remanufactured by Stewart & Stevenson 11/...

    $105,000 USD

    Get financing

    Est. $1,976/mo

    South Texas, TX, USA
  • Trusted Seller
    IR Ingersoll Rand Air Compressor

    IR Ingersoll Rand Air Compressor

    • Manufacturer: Ingersoll Rand
    • Model: R160I

    200 Horsepower Air Compressor, Available Immediately, Warranty available - Robust Cast Iron IP55, 380V ~ 415V/3PH/50HZ motor - Rugged Ingersoll Rand airend with duplex tapered roller bearings - No maintenance in...

    $22,500 USD

    Get financing

    Est. $423/mo

    El Paso, TX
  • Trusted Seller
    2025 GS 1980

    2025 GS 1980

    • Manufacturer: GS

    www.VIDAEQ.com 2025 G.S. 1980 Decanting Centrifuge Available now! 👉 For Sale and manufactured upon request. This is a new manufactured machine. Overall Dimensions & Weight Weight: 10,590 lbs Length: 200 in ...

    Magnolia, TX
  • Trusted Seller
    NOV Brandt HS 3400

    NOV Brandt HS 3400

    • Manufacturer: NOV

    Used As-Is and Where Is Used NOV Brandt HS 3400 Decanter Centrifuge. Rebuilt and Balanced 10/29/19 This machine is in field ready condition with light use since last rebuild and ready to work. Stainless Steel...

    San Antonio, TX
12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.