Processing » Utrecht

Search By Category

Search By Manufacturer

Building Filters

1004

Used Processing in Utrecht, Netherlands

  • Trusted Seller
    1999 BITZER 6H-35.2Y(2x) + 4V-10.2Y

    1999 BITZER 6H-35.2Y(2x) + 4V-10.2Y

    • Manufacturer: Bitzer
    • Model: 6H-35.2Y

    Nice complete Bitzer system with 3 piston compressors, a liquid receiver and a control box. Mentioned capacity at an evaporating temperature of -5°C and a condensation temperature of +40°C.

    Mijdrecht, Netherlands
  • Trusted Seller
    2004 GUENTNER AGVH 102A/2×5 L

    2004 GUENTNER AGVH 102A/2×5 L (D)

    • Manufacturer: Güntner

    Very well maintained ammonia air-cooled Guentner condenser, with 10 ventilators. The condenser has steel tubes (for ammonia) which have a life-long cycle and the aluminum fins are in perfect shape. The condenser...

    Mijdrecht, Netherlands
  • Trusted Seller
    1992 LU-VE HDS 167N2

    1992 LU-VE HDS 167N2

    • Manufacturer: Lu-Ve
    • Model: HDS167

    Nice Lu-Ve dual discharge evaporator with 4 fans. Cooling capacity: 10.0 kW | Number of fans: 4 | Fin spacing: 3,5 mm | Refrigerant: HFC | Voltage: 230 Volts | Motor power: 4x 0,07 kW | Dimensions: 2200 x 900 x 2...

    Mijdrecht, Netherlands
  • Trusted Seller
    2012 LIEBERT SRH004

    2012 LIEBERT SRH004

    • Manufacturer: Liebert - Vertiv

    Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. Thes...

    Mijdrecht, Netherlands
  • Trusted Seller
    2009 GOEDHART VCI-B 81408 G

    2009 GOEDHART VCI-B 81408 G

    • Manufacturer: Goedhart

    Nice Goedhart evaporator with 1 fan. Mentioned capacity at an evaporating temperature of -8°C and 8K.

    Mijdrecht, Netherlands
  • Trusted Seller
    2009 DAIKIN EWLP 026 KAW1N

    2009 DAIKIN EWLP 026 KAW1N

    • Manufacturer: Daikin

    Very nice Daikin hydrocube chiller with remote condenser (not included) and 1 scroll compressor. Mentioned capacity at a water temperature of 12/7 °C (in/out) and a condensing temperature of +45°C using water.

    Mijdrecht, Netherlands
  • Trusted Seller
    2003 VAN WEST KOELTECHNIEK WGK

    2003 VAN WEST KOELTECHNIEK WGK MTZ 64

    • Manufacturer: VAN WEST KOELTECHNIEK

    Air-cooled (Van West Koeltechniek) water chiller. This water chiller is equipped with a hydro kit (2x water pump and a buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature...

    Mijdrecht, Netherlands
  • Trusted Seller
    1998 Tecumseh / L'Unité Hermetique

    1998 Tecumseh / L'Unité Hermetique TAGP4553Z (2x)

    • Manufacturer: Tecumseh / L'Unité Hermetique

    A central compressor skid with two L’Unite Hermetique compressors, complete with liquid receiver and control box etc. mentioned capacity is at -5/+40°C

    Mijdrecht, Netherlands
  • Trusted Seller
    2004 SEARLE KS 20-8

    2004 SEARLE KS 20-8

    • Manufacturer: Searle

    Nice Searle evaporator with 1 fan. Mentioned capacity at an air temperature of 0°C (inlet) and 8K.

    Mijdrecht, Netherlands
  • Trusted Seller
    2011 Rieger Proces tank

    2011 Rieger Proces tank

    • Manufacturer: Rieger

    Insulated tank. 2 x CIP spray bowl (1 high and 1 low). With propeller agitator, motor 1.1 kW - 2.45 A -313 rpm - 50 Hz. Max temperature: 85 °C. With level sensor, high and low. With pressure transmitter and tempe...

    Lopik, Netherlands
  • Trusted Seller
    1992 Ampack Ammann AA4/4 75/95

    1992 Ampack Ammann AA4/4 75/95

    • Manufacturer: Ammann
    • Model: AA44 7595

    4 Lines, Cup filling and sealing machine for viscous products like yoghurt. Cup diameter 75 and 95 mm, double plates for automatic change by moving chain 1 step forward or backward. Cup decontamination by UV ligh...

    Lopik, Netherlands
  • Trusted Seller
    1984 SIG F140

    1984 SIG F140

    • Manufacturer: SIG

    Full Automatic filling and wrapping machine for butter in aluminum foil or parchment paper. Product feed by trough and augers. Photo cell for print centering device. Outfeed conveyor of 108x17.5 cm. 1x French for...

    Lopik, Netherlands
  • Trusted Seller
    Meca System 2002

    Meca System 2002

    • Manufacturer: Meca System

    Tray sealing machine. Different format sets available.

    Lopik, Netherlands
  • Trusted Seller
    2003 GEA Ecoflex GmbH VT40

    2003 GEA Ecoflex GmbH VT40 BC-6

    • Manufacturer: GEA

    Milk pasteurizer unit, with Plate heat exchanger (PHE). Max pressure: 8 bar - max temperature: 130 °C. Beam length: 254 cm, connections: 10 x 2.5" Tryclamp. Current configuration 4 Sections: regeneration (2x), he...

    Lopik, Netherlands
  • Trusted Seller
    2004 Gericke GLD87 0

    2004 Gericke GLD87 0

    • Manufacturer: Gericke

    Dosing machine for powdery products. Hopper diameter 40 cm - height: 80 cm. Motor or agitator: 0.12 kW - 0.42 A - 50Hz - n1: 1,350 rpm - i 70 - n2: 19.5 rpm. Motor or outfeed screw: 0.12 kW - 0.8 A - 50 Hz - n1:...

    Lopik, Netherlands
4142434445

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.