Processing » Utrecht

Building Filters

63

Used process engineering in Utrecht, Netherlands

  • Trusted Seller
    1998 Atelier Dumon Chain

    1998 Atelier Dumon Chain

    • Manufacturer: Atelier Dumon

    Chain conveyor with 90 ° infeed corner and 180 ° outfeed corner. Effective calling: 1,000 x 25 cm. Engine: 0.55 kW - 52 rpm. Horizontal. Total 160 x 650 x 115 cm.

    Lopik, Netherlands
  • Trusted Seller
    2007 AZO DFS100x225 NE 300

    2007 AZO DFS100x225 NE 300

    • Manufacturer: AZO

    Powder transport auger. Length of auger 250 cm. Diameter auger: 10 cm. Displacement per revolution ± 9 cm length. Engine: 1,5 kW - 3,7 A - n1: 1710 rpm - n2: 100 rpm. Inlet: diameter 30 cm. Outlet diameter 10 cm ...

    Lopik, Netherlands
  • Trusted Seller
    2007 Klovborg Maskinfabrik A/S Chain

    2007 Klovborg Maskinfabrik A/S Chain conveyor

    • Manufacturer: Klovborg Maskinfabrik A/S

    Chain conveyor. Effective belt: 20 x 390 cm. Engine details unknown, no typeshield. Possible to make a small carry up or down. Total dimensions: 400 x 40 x 150 cm.

    Lopik, Netherlands
  • Trusted Seller
    Pall ECS7006G30H4

    Pall ECS7006G30H4

    • Manufacturer: Pall

    2 Air/gas filter housings in stainless on a frame each filterhous with 3 filters. With Total dimensions: 186x70x145 mm (lxwxh) - weight: 292 kg's. Cupper tubular heat exchanger to control air temperature.

    Lopik, Netherlands
  • Trusted Seller
    CIP tank

    CIP tank

      CIP tank with agitator and spiral tube heater inside the tank. Blade agitator - engine: 0,37 kW - 1,2 A - 1.370 rpm - 50 Hz. Spiral tube heater: 86 pipes - inner pipe Ø 10 mm - tube Ø 260 mm - tube length 98 cm. ...

      Lopik, Netherlands
    • Trusted Seller
      1998 Mondomix G-75

      1998 Mondomix G-75

      • Manufacturer: Mondomix

      Continuous aerating machine, Double jacketed head. Pressure: max 10 bar. Main motor 18,5 kW, variable speed with frequency converter make: Danfoss. Including: E&H Mass (kg/h) Flowtransmitter, temperture sensor on...

      Lopik, Netherlands
    • Trusted Seller
      2002 CFS Compact 380

      2002 CFS Compact 380

      • Manufacturer: CFS/Koppens

      Thermoforming vacuum packaging machine for both soft and hard foil, foil width: 360mm, foil thick 60 my, Form station up to 100 mm dept, Forming, empty space for filling (cheese), vacuum and sealing station, vacu...

      Lopik, Netherlands
    • Kormee SL20BS35 Slurpie

      Kormee SL20BS35 Slurpie

      • Manufacturer: Kormee

      SL20BTKS35 Slurpie Vacuum Tank This Vacuum tank is suitable for frequent and long-term use. Equipped with a water ring pump, the Slurpie can last for years with little or no maintenance on the vacuum pump. Prov...

      Rhenen, Netherlands
    • Kormee SL20BTL3 Slurpie

      Kormee SL20BTL3 Slurpie

      • Manufacturer: Kormee

      Vacuum tank unit. For applications like vacuuming Bentonite, grout and other (mud-like) liquids. Equipped with a 2000m3 tank, Honda petrol engine and a turbomolecular pump. Please refer to the [brochure page](h...

      Rhenen, Netherlands
    • Trusted Seller
      RAFFEL NH3 – 554 m²

      RAFFEL NH3 – 554 m²

      • Manufacturer: RAFFEL

      Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 554 m2. Link for smaller/bigger capacities (same type): 276m², 378m², 648m², 722m²

      Mijdrecht, Netherlands
    • Trusted Seller
      1987 GUENTNER S-GHS 80/212

      1987 GUENTNER S-GHS 80/212

      • Manufacturer: Güntner

      Nice complete Guentner (blast freezer) evaporator with 12mm fin spacing, which is perfect for a freezing tunnel and equipped with 2 fans. Mentioned capacity at an evaporating temperature of -8°C and 8K. (Q= 12kW...

      Mijdrecht, Netherlands
    • Trusted Seller
      2013 GOEDHART PLK.s 246 m2

      2013 GOEDHART PLK.s 246 m2

      • Manufacturer: Goedhart

      Good Goedhart evaporator with 3 fans. Mentioned capacity at an evaporating temperature of -10°C and 8K.

      Mijdrecht, Netherlands
    • Trusted Seller
      1999 HELPMAN THOR 258-6/KB-G1

      1999 HELPMAN THOR 258-6/KB-G1

      • Manufacturer: Helpman
      • Model: Thor

      Nice Helpman evaporator with 5 fans. Mentioned capacity at an evaporating temperature of -8°C and 8K.

      Mijdrecht, Netherlands
    • Trusted Seller
      2009 GOEDHART VCI-B 81408 G

      2009 GOEDHART VCI-B 81408 G

      • Manufacturer: Goedhart

      Nice Goedhart evaporator with 1 fan. Mentioned capacity at an evaporating temperature of -8°C and 8K.

      Mijdrecht, Netherlands
    • Trusted Seller
      RAFFEL NH3 – 722 m²

      RAFFEL NH3 – 722 m²

      • Manufacturer: RAFFEL

      Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 722 m2. Link for smaller capacities (same type): 276m², 378m², 554m², 648m²

      Mijdrecht, Netherlands
    12345

    Overview

    Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

    FAQ

    What should I consider when buying used processing equipment?

    Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

    How do I arrange shipping for processing equipment?

    Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

    What is the typical maintenance for processing equipment?

    Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.