Processing » Utrecht

Search By Category

Search By Manufacturer

Building Filters

1085

Used Processing in Utrecht, Netherlands

  • Trusted Seller
    N.N.. Storage tank

    N.N.. Storage tank

    • Manufacturer: N.N..

    Vertical storage tank , Insulated side and bottom. Pressure in tank atmospheric, Product outlet 2 "DIN pneumatic butterfly valve Connections for:high and low level sensor. Breather. CIP spray bowl. Manhole in to...

    Lopik, Netherlands
  • Trusted Seller
    1982 Pierre Guerin S.A. 4000L

    1982 Pierre Guerin S.A. 4000L

    • Manufacturer: Pierre Guerin

    Insulated heatable cip tank. overflow pipe integrated, 2x inlet and outlet connections 4" outlet height: 15 cm. 1 x level sensor on top. On side connections for sensors. has a steam injector for low noise smooth ...

    Lopik, Netherlands
  • Trusted Seller
    Het Stempel BV N.N.

    Het Stempel BV N.N.

    • Manufacturer: Het Stempel BV

    Tubular heat exchanger, sanitary (THE). Monotube, 1 compartments, Straight design, 3 tubes, 1 section. Length inner tube: 200 cm, length outer tube 180 cm. Outer diameter 38 mm, inner diameter: 22,5 mm. Connecti...

    Lopik, Netherlands
  • Trusted Seller
    2010 A & F 740-2-25W24

    2010 A & F 740-2-25W24

    • Manufacturer: A & F

    Fully automatic packer, for wraparound carton boxes. Used bricks of foil. Including hotmelt Nordson model: Problue 4. Has been running together with Benhil 8000 foil packing and wrapping machine for butter.

    Lopik, Netherlands
  • Trusted Seller
    2002 Grunwald FL6000/4

    2002 Grunwald FL6000/4

    • Manufacturer: Grunwald

    Piston doser 200-500ml, CIP cleanable 4 heads with servo drive motors brand Elau model: SM100 and SM140 drives model: MC-4, each piston as has a drive motor to adapt the volume automatically during running (servo...

    Lopik, Netherlands
  • Trusted Seller
    2006 Fromatec TBG-1560

    2006 Fromatec TBG-1560

    • Manufacturer: Fromatec

    Stainless steel mesh belt. Belt width 60 cm. Belt length 150 cm. Motor 0,37 kW. Total dimensions 150 x 80 x 100 cm.

    Lopik, Netherlands
  • Trusted Seller
    1996 APV 1110 MC 25-4,5

    1996 APV 1110 MC 25-4,5 TBS

    • Manufacturer: APV

    High pressure homogenizer with Ball valve for viscose products. 2 stage(s) with hydraulic pressure control. 5 Pistons, piston diameter: 38 mm (1.5") and stroke: 115 mm. Stainless steel cladded. Motor power: 55 K...

    Lopik, Netherlands
  • Trusted Seller
    1997 Rannie LAB.12.51H

    1997 Rannie LAB.12.51H

    • Manufacturer: Rannie

    Mobile laboratory homogenizer. With manual pressure control 1st and 2nd stage and pressure gauges. Piston diameter 12 mm - stroke 51 mm. Motor: 7.5 kW - 15.3 A. Maximum pressure: 1,000 bar. Overpressure valve. Co...

    Lopik, Netherlands
  • Trusted Seller
    Typhoon Batch mixer

    Typhoon Batch mixer

    • Manufacturer: Typhoon

    High shear mixer on mobile tripod. Agitator type: propeller. Motor 0.75 kW - 1.88 A - 50 Hz - 1,410 rpm with forced cooling. Controls directly on machine with adjustable speed via frequency converter. Height mixe...

    Lopik, Netherlands
  • Trusted Seller
    2007 Kinematic AG / Ystral

    2007 Kinematic AG / Ystral Polytron PT-DD 36-60

    • Manufacturer: Ystral

    High shear mixer on mobile tripod - high speed. Tripod height manually adjustable; lowest position: 25 cm - highest position: 70 cm (measured below agitator head). Outer diameter mixing head 60 mm. Motor 3.0 kW -...

    Lopik, Netherlands
  • Trusted Seller
    2001 Trepco Cup M

    2001 Trepco Cup M

    • Manufacturer: Trepco

    Cup destacking unit for preformed cups with a diameter of 95 mm. Single head. Pneumatic. Motor: 0.09 kW. Control panel with Siemens S7-200 PLC. Total dimensions: 130 x 80 x 190 cm.

    Lopik, Netherlands
  • Trusted Seller
    Dru 26

    Dru 26

    • Manufacturer: Dru

    Horizontal former farm tank. Nominal volume: 2,500 liters. Without cooling compressor unit for freon but also Icewater can be connected to the jacket. Top driven propeller, motor: 133 W - n1: 2,800 rpm - n2: 25 r...

    Lopik, Netherlands
  • Trusted Seller
    2000 GEA Ahlborn VT40 BC-16

    2000 GEA Ahlborn VT40 BC-16

    • Manufacturer: GEA
    • Model: VT40 BC-16

    Plate heat exchanger, sanitary (PHE). Max working pressure: 10 bar - Max working temperature: 100 °C. Beam length: 194 cm, connections: 4x DN100 Din - 2 x DN65 Din. Current configuration: 2 Sections: 73-87 plates...

    Lopik, Netherlands
  • Trusted Seller
    Auttec #STN15810

    Auttec #STN15810

    • Manufacturer: Auttec

    Cheese storage climatization unit, to control air temperature and humidity in a cheese storage. Very compact design in stainless steel housing. Air treatment unit Blower, Filter, heating and cooling heat exchange...

    Lopik, Netherlands
  • Trusted Seller
    N.N.. SS Heater

    N.N.. SS Heater

    • Manufacturer: N.N..

    Water heater, Insulated rectangular tank with spiral. Used as heater of water by circulation under pressure hotwater through a spiral and circulation of (sanitary) water without pressure for usage for in the fact...

    Lopik, Netherlands
4546474849

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.