Building Filters
CMA PCU 40HP
- Manufacturer: CMA
Bale formation (cm): 80 x 110 x variable | Hopper (cm): 150 x 102 | Bale weight (kg): 700 | Vertical ligation: No.4 wires | Legatore: Automatic Vertical | Tons of thrust: 75 | Power (hp): 40+7.5 at 380V | Hourly...
Arbizzano, Italy
ITALCOS TL25
- Manufacturer: Italcos
Bale formation (cm): 80 x 90 x variable | Bale weight (kg): 500/600 | Hopper (cm): 150 x 82 | Vertical ligation: No.4 wires | Legatore: Automatic Vertical | Tons of thrust: 60 | Power (hp): Hp 25 at 380V | Hourl...
Arbizzano, Italy
IC SYSTEM Logic 100
- Manufacturer: FA.LCO. ASSISTANCE
Bale formation (cm): 80 x 110 x variable | Installed power: 50×2 + 5,5 | Hopper (cm): 170 x 102 | Maximum pressure(bar): 300 | No-load cycles: 4/m' | Tons of thrust: 95 | Tank capacity: 1000 | Hourly production ...
Arbizzano, Italy
ITALCOS 10hp
- Manufacturer: Italcos
Length (mt): 4,4 | Height (mt): 1,8 | Width (mt): 2,8 | Bale formation (cm): 60 x 65 | Hopper (cm): 55 x 80 | Max press (bar): 200 | Tons of thrust: 12 | No-load cycles: 5/m' | Power (hp): 7,5+1,5 | Tank (lt): 9...
Arbizzano, Italy
IC SYSTEM 30hp
- Manufacturer: FA.LCO. ASSISTANCE
Length (mt): 8,5 | Height (mt): 2,7 | Width (mt): 2,1 | Bale formation (cm): 110 x 80 | Max press (bar): 300 | Hopper (cm): 150 x 102 | Horizontal ligation: No.3 wires | No-load cycles: 4/m' | Tons of thrust: 68...
Arbizzano, Italy
Pit-Type Furnaces
These furnaces are widely used in the following processes: hardening and tempering, cementation, carbonitriding, nitriding, tempering in a controlled atmosphere, and simple heating. The charge resides inside a st...
Cartigliano, Italy
OMPI PCRT1004/80.90P
- Manufacturer: FA.lCO.
Bale formation (cm): 80 x 90 x variable | Bale weight (kg): 450/500 | Hopper (cm): 80 x 75 | Horizontal ligation: No.4 wires | Legatore: Automatic Horizontal with thread tensioner | Tons of thrust: 45 | Power (h...
Arbizzano, Italy
Italcos IC SYSTEM 80hp
- Manufacturer: Italcos
Length (mt): 10 | Height (mt): 3 | Width (mt): 2,3 | Bale formation (cm): 170 x 102 | Bale weight (kg): 150/200 | Hopper (cm): 60 x 80 | Max pressure (bar): 300 | Tons of thrust: 94 | No-load cycles: 5/m' | Powe...
Arbizzano, Italy
CMA 40hp
- Manufacturer: FA.LCO. ASSISTANCE
Length (mt): 8,3 | Height (mt): 2,9 | Width (mt): 2,1 | Bale formation (cm): 110 x 80 | Hopper (cm): 150 x 102 | Max pressure (bar): 300 | Tons of thrust: 76 | No-load cycles: 4/m' | Power (hp): 40+7,5 | Hourly ...
Arbizzano, Italy
THEME 96/100
- Manufacturer: FA.LCO. ASSISTANCE
Bale formation (cm): 65 x 70 x variable | Bale weight (kg): 150/200 | Hopper (cm): 60 x 80 | Horizontal ligation: No.3 wires | Legatore: Automatic Horizontal | Tons of thrust: 30 | Power (hp): Hp 12 at 380V | Ho...
Arbizzano, Italy
Monselice, Italy
Used 75-ton C.M.R.M. press
Used C.M.R.M. 75-ton press, semiautomatic, plate 90 x 70 cm, piston stroke 75 cm, cylinder diameter 20 cm, tank capacity 180 liters, operating pressure 210 bar, working. Total weight of the press approximately 4 ...
Used CM 35 ton press
Used CM 35-ton semi-automatic press, 90 x 70 cm plate, 70 cm spacing between plates, fully functional with no oil leaks. Total press weight: 3500 kg.
Planetary mixers 20/30/40/60 liters
According to European Law EN 453 Detachable product conveyor on the rear protection Power-assisted bowl lifting lever within the 250N of torce required by L.D. 626 Food-grade aluminium cam to avoid that paint or ...
Thiene, Italy
Standard Water Chillers
Tank made of AISI 304 stainless steel Compressor GAS R 452A Digital thermostat Vertical agitator Automatic loading Overload drain Mounted on wall (MRE-100-TH / wall support included) Mounted on feets (MRE-175-T a...
Thiene, Italy