Processing » Vermont

Building Filters

24

Used controller in Vermont, USA

  • Ex-Cell-O Workcenter 608

    Ex-Cell-O Workcenter 608

    • Manufacturer: Ex-Cell-O

    CNC Horizontal Mill -Equipped With- 72" Square Angle Head ***Needs a coolant pump***

    Town of Rockingham, VT
  • 2005 Milltronics RH15

    2005 Milltronics RH15

    • Manufacturer: Milltronics

    CNC Bed Mill -EQUIPPED WITH- Rigid Tapping Yaskawa AC Drives & Motors 800 IPM Rapids Box Ways Auto Oil Lube

    Town of Rockingham, VT
  • 2006 Southwestern Industries DPM V5

    2006 Southwestern Industries DPM V5

      CNC Vertical Bed Mill Control: Proto Trak VM | X-axis travel: 40" | Y-axis travel: 20" | Z-axis travel: 24" | Table size: 12" x 50" | Table load: 1,760 lbs | Spindle speed: 3,950 RPM | Spindle taper: NMTB 40 | Sp...

      Town of Rockingham, VT
    • 1997 Mighty COMET MV-5

      1997 Mighty COMET MV-5

      • Manufacturer: Comet

      3-Axis CNC Bed Mill -EQUIPPED WITH- 90 Degree Head/Quill Swivel Spindle Power Draw Bar Quill Auto Feed

      Town of Rockingham, VT
    • 2000 Southwestern Industries TRAK DPM

      2000 Southwestern Industries TRAK DPM

      • Manufacturer: TRAK

      CNC Tool Room Bed Mill -EQUIPPED WITH- Kurt Vise Control: TRAK A.G.E. 3 | X axis travel: 31" | Y axis travel: 17" | Z axis travel: 23.5" | Quill travel: 5" | Table size: 10" x 50" | Max table load: 1,320 LBS | Sp...

      Town of Rockingham, VT
    • 1975 Newbury V330RS

      1975 Newbury V330RS

        Plastic Injection Molder **MACHINE HAS BEEN REBUILT**

        Town of Rockingham, VT
      • 2007 Welltec 2200 F2R

        2007 Welltec 2200 F2R

        • Manufacturer: Welltec

        Injection Molding Machine -EQUIPPED WITH- Yushin netliner VN 11-EA-2000S Robot Loader LDR: 19.5:1

        Town of Rockingham, VT
      • 2005 Southwestern Industries TRAK DPM5

        2005 Southwestern Industries TRAK DPM5

        • Manufacturer: TRAK

        CNC Bed Mill -EQUIPPED WITH- Yoeng Dien Auto Electric Way Lube Pump USB Port- 2 For Program Loading Maxi Torque-Rite Pneumatic Drawbar Tool Holder Big Box Ways Dual Kurt 6" Wide Vises 220 Volt, 15 Amps, 3 Ph ...

        Town of Rockingham, VT
      • 2007 Fryer MB-14

        2007 Fryer MB-14

          CNC Tool Room Bed Mill -EQUIPPED WITH- Anilam 3300 MK Control Power Draw Bar Manual Handles For X & Y Axis Rugged Heavy Duty Meehanite Castings

          Town of Rockingham, VT
        • Dyna Myte DM2800

          Dyna Myte DM2800

            Bench Top CNC Bed Mill Make: Dyna Metronics | Spindle speed: 8,000 RPM | Spindle taper: 30

            Town of Rockingham, VT
          • Trusted Seller
            72" WIDE x 25' LONG

            72" WIDE x 25' LONG WORLDWIDE STAINLESS STEEL FLOATATION DRYER

            • Manufacturer: WorldWide

            107671 One (1) Used 72" x 25' Worldwide Stainless Steel Floatation Dryer was in use at Konarka/Polaroid. Comes with the hoists and drive shaft for top/bottom separation 4 large ducts on side with stainless steel ...

            Vermont, USA
          • AMERICAN WOOD DRYER Kiln –

            AMERICAN WOOD DRYER Kiln – 100 MBF

            • Manufacturer: American Wood Dryers

            AMERICAN WOOD DRYER KILN - 2 chamber package type dry kiln. New 1994. Very good condition. Requires low pressure steam (15 psi). 5 VFD controlled fans. Includes controls and boiler room and Boiler . Capacity appr...

            Fairlee, VT
          • Niles Bement Pond 60 x

            Niles Bement Pond 60 x 60 x 24

            • Manufacturer: Niles

            Planer Mill -EQUIPPED WITH- Pendant Control Digital Read Outs 2 Milling Heads

            Town of Rockingham, VT
          • 1971 Gray T 76179

            1971 Gray T 76179

              Manual Planer Mill -EQUIPPED WITH- Vertical Milling Head Manual Pendant Control Transformer

              Town of Rockingham, VT
            • 2002 PVT ALU-BRAZE-1200

              2002 PVT ALU-BRAZE-1200

                Vacuum Brazing Furnace -EQUIPPED WITH- Pendant Control Stokes Vacuum Pump McLean Midwest Air Conditioner

                Town of Rockingham, VT
              12

              Overview

              Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

              FAQ

              What should I consider when buying used processing equipment?

              Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

              How do I arrange shipping for processing equipment?

              Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

              What is the typical maintenance for processing equipment?

              Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.