Processing » Victoria

Search By Category

Search By Manufacturer

Building Filters

283

Used engines in Victoria, Australia

  • 2007 Advanced Engineering 3.4M LONG

    2007 Advanced Engineering 3.4M LONG

    • Manufacturer: Advanced Engineering

    Motorised and with a stainless steel frame, this conveyor is in excellent condition. The belt is of a plastic modular type. Made in Australia

    $8,102 USD

    Get financing

    Est. $159/mo

    Campbellfield, Australia
  • Trusted Seller
    Allen Engineering Vibratory Feeder

    Allen Engineering Vibratory Feeder

    • Manufacturer: Allen

    Hawthorn, Australia
  • A & G ENGINEERING 200

    A & G ENGINEERING 200

    • Manufacturer: A&G Mercury

    200 mm dia Pipe Type Screw mild steel conveyors. 1 x 3 meter, 1 x 2.6m with 28/1 gearbox, no motors fitted. Price per screw auger.

    Melbourne, Australia
  • CONTECH ENGINEERING 1800 x 1100

    CONTECH ENGINEERING 1800 x 1100

    • Manufacturer: CONTECH ENGINEERING

    Stainless steel conveyor with food grade belt. Very slow speed. Approx 3 rpm .1kw geared drive. Belt Width 1100mm Length 1800mm Height 945mm Ex food plant.

    Melbourne, Australia
  • JACMOR ENGINEERING 400 x 3

    JACMOR ENGINEERING 400 x 3

    • Manufacturer: JACMOR ENGINEERING

    Stainless steel Auger 400 diam. 2 lengths approx 3m each.

    Melbourne, Australia
  • JACMOR ENGINEERING 4500 X 150

    JACMOR ENGINEERING 4500 X 150

    • Manufacturer: JACMOR ENGINEERING

    Stanless steel screw conveyor - SS 316 All stainless steel construction. Heavy duty frame Bare shaft. Air seal at input end. Covers are hinged and removable. Screw turns nicely.

    Melbourne, Australia
  • JACMOR ENGINEERING 2 x 370

    JACMOR ENGINEERING 2 x 370

    • Manufacturer: JACMOR ENGINEERING

    Stainless steel auger. Last used on Mozzarella line. 2 mt long x 370 mm dia. Inlet 370mm x 600mm Outlet 400mm x 400mm 0.75kw geared motor drive.

    Melbourne, Australia
  • BONSER ENGINEERING 450 S/steel

    BONSER ENGINEERING 450 S/steel

    • Manufacturer: BONSER ENGINEERING

    Z Blade mixer 450L, stainless steel blades and bowl, jacketed bowl, hydraulic tilt, hot oil heater, 22kw drive, 870 x 855 x 600 deep bowl.

    Melbourne, Australia
  • JACMOR ENGINEERING 6.2 x 250

    JACMOR ENGINEERING 6.2 x 250

    • Manufacturer: JACMOR ENGINEERING

    Mild steel pipe type screw conveyor. Heavy duty 7 mm Screw thickness. 200mm screw pitch 250mm diam x 6.2m long 4kw SEW 68 rpm. Drive 415v. Last used on Gypsum.

    Melbourne, Australia
  • A & G ENGINEERING 10m

    A & G ENGINEERING 10m x 400

    • Manufacturer: A&G Mercury

    Stainless steel screw conveyor, screw auger. 10m long x 400mm dia 350mm pitch 4mm flight thickness 7.5kw drive (415V). 400mm x 500mm outlet 600mm x 500mm inlet

    Melbourne, Australia
  • JACMOR ENGINEERING 4.5 x 570

    JACMOR ENGINEERING 4.5 x 570

    • Manufacturer: JACMOR ENGINEERING

    Mild steel screw conveyor. 4.5m long x 570mm wide trough. Screw dia is 450mm. Screw pitch is 400mm SEW geared drive 5.5kw 54 rpm. 200mm x 1200mm inlet. 450mm x 450mm outlet. Last used to move sand. Run and tested.

    Melbourne, Australia
  • CONTECH ENGINEERING 5.5 x 340

    CONTECH ENGINEERING 5.5 x 340

    • Manufacturer: CONTECH ENGINEERING

    Flat belt food grade conveyor. 5.5m long x 340mm wide. stainless steel frame with mild steel legs mounted on castors. SEW 0.37kw 21-104 rpm Mechanical variable speed drive. 800mm height from ground.

    Melbourne, Australia
  • CONTECH ENGINEERING 3.1 x 300

    CONTECH ENGINEERING 3.1 x 300

    • Manufacturer: CONTECH ENGINEERING

    Mild steel conveyor with food grade plastic belt. 0.55kw SEW 19 rpm geared drive. Complete with pneumatic arm to push product off the conveyor from the side. Conveyor deck height is 950mm from ground. Mounted on ...

    Melbourne, Australia
  • JACMOR ENGINEERING 5.8 x 250

    JACMOR ENGINEERING 5.8 x 250

    • Manufacturer: JACMOR ENGINEERING

    Mild steel pipe type screw conveyor. Heavy duty 7 mm Screw thickness. 200mm screw pitch 250mm diam x 5.8m long 4kw SEW 222 rpm. Drive 415v. Last used on Gypsum.

    Melbourne, Australia
  • JACMOR ENGINEERING 1.5 x 320

    JACMOR ENGINEERING 1.5 x 320

    • Manufacturer: JACMOR ENGINEERING

    Stainless steel screw conveyor mounted on steel frame. 1.5m Long x 320mm wide. 200mm screw pitch .37kw 33 rpm geared drive. Inlet 320 mm x 500mm Outlet 320mm x 400mm

    Melbourne, Australia
12345

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.