Used force in Victoria, Australia

Draught Force A3614

• Manufacturer: Draught Force

This fan is in great working condition. Comes with a big ventilation box, which has an actuated-controlled vents and a sensor. Built in Australia. Mostly made out of galvanised steel.

Branson 8800

• Manufacturer: Branson
• Model: 8800

This ultrasonic welder is in good working condition. Comes fitted with converter, booster and horn. For welding plastics. Good for PVC, HDPE, & ABS.

2007 TECA-PRINT TPE 151

• Manufacturer: TECA

This printer is in good working condition. It has the jig and automation gear mostly intact so you can repurpose to suit your needs. It is enclosed in a box which has a refrigerated cooler attached. It also comes...

GENERIC/ AS-11N

• Manufacturer: GENERIC/UNKNOWN

Packing speed: < 1.5s per cycle | Min. packing size: 60mm | Max. tension force: 35kg | Applicable belt width: 6mm to 15mm | Strapping core: 200mm Diameter Max. | Worktop area (mm): 735 L x 565 W | Worktop height...

SYNTRON V51-D1

• Manufacturer: SYNTRON

Vibrating motor with a mild vibrational force, runs well, 240Volt single phase.

INVICTA 110 x 90

• Manufacturer: Invicta

Heavy duty Vibrating Table fitted with 2 vibrating motors. Mounted on springs with adjustable angles for the motors. Table size is 1100mm x 900mm Each motor is an INVICTA 2685Watts, 44145 Force (N), 5.1amp, 415V ...

Richardson Pacific CYCLONE DEDUSTER DUST SEPARATOR COLLECTOR

• Manufacturer: Richardson Pacific

This unit is in good condition. It has a built on blower to provide vacuum. Designed for high dust load, high temperature, and product recovery applications. It has a mechanical separator that uses centrifugal fo...

PSF EQUIPMENT 300

• Manufacturer: PSF EQUIPMENT

Stainless Steel Belt Dryer - variable speed. Food grade 300mm wide S/S wire belt (10mm gap) 5 tier (approx 7.5m of conveyor). Thermostat control tested up to 130 degrees Celsius 6 x 2kW Electric Elements with fan...

KONGSKILDE CYCLONE DUST COLLECTOR LOADER - 600MM DIAMETER

• Manufacturer: Kongskilde

This cyclone is in great condition and from a reliable Danish brand. Kongskilde cyclones are key components in pneumatic conveying and dust collection systems. Designed to separate materials from the conveying ai...

FRYMA MZ110

• Manufacturer: Fryma
• Model: MZ

Fryma Model MZ110 toothed colloid mill. The FRYMA MZ110 is an inline toothed colloid mill suitable for slurries, that grinds solids and homogenizes the slurry. The required fineness can be adjusted by means of ad...

Reverse Osmosis Housing with Membrane

Reverse Osmosis Housing with 3 membranes. Housing 3250mm Long Diameter 6.5 Inches Each filter membrane measure 960mm X 160mm in diameter. 3 inch Input and Output with triclover fittings. Reverse osmosis removes c...

CENTROMAT CENTRIFUGAL PARTS TOOL MOLD SPINNER AND DRYER

• Manufacturer: Spinner

This machine is in great working condition. It was previously used in a chocolate factory cleaning molds. It is designed to dry and clean parts, tools and molds by using centrifugal force. There is also a heater ...

Diesel Transfer Pump 4″ Volume 10HP Electric Start Large Fuel Tank

• Capacity: 13.5 L

These diesel transfer pumps are powered by reliable, strong-built air cooled diesel engines. Suitable for various applications like dewatering, agricultural, etc. High quality aluminum pump housing and cast-iron ...