Used casting machine in Wallonia, Belgium

1962 Double grinder, foundry, Ø 600 mm, continuous

• Manufacturer: BAUTENBERG

Type: SS6/45/25, serial number: 1653 Motor HELIN, type DKH 15- 4; 2 x 5,5 kW; 1430 rpm; 380/660 V Continuous speed with 2 motors and 4-step pulley

Pendulum grinder, Ø 400 mm, width 65 mm

Motor SIEMENS, type 1LA27722AA40, 5,5 kW, 380 V, 2930 rpm With belt drive

Vibration polishing machine ROTO FINISH, 1100 mm x 420 mm

4 kW, 380/440 V, 7 A, turns left-right Ø 220mm trap exchange stones Vibration by unbalance motor Vibration with stones and water Rubber inside, in good condition With polishing stones Without control box Delivery...

Grinder DIETER BARTSCH; 60m/s; Ø600mm

• Manufacturer: DIETER BARTSCH;

35A; 2960rpm; 50HZ; 3×400V; 11KW Without Roots visor Without emergency stop With step pulley with 3 belts With suction nozzle

Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.

Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter

Cut-off machine with 2 parallel disks, Ø 300 mm, HANS BOOST

Type: STA 300/300, serial number: 354 Year of construction: 1974, weight: ± 700 kg Hydraulic tubes Motor H SAFTIG, type AOM132S-2, 7,5 kW, 380 V, 2910 rpm With table length 300 mm, width 200 mm, 2 discs Ø 300 mm ...

Double floor type grinder DÜRRSCHMIDT, Ø 760 x 80mm

Type: VITEX, weight: ±2300 kg 1 transversal axis motor S.W., type: M00D33SP, serial: 265975, 20 kW, 27 PS, 220/380 V, 1440 rpm Files plates 360 x 150mm With 3 speeds by stepped pulley With sensor on the back of t...

Moulding machine OSBORN 716 R4F, table 850mm x 530mm

Ram-jolt machine Weight: 1900 kg | Dimensions: width 1000mm, depth 1300mm, height 1800mm | Pression stroke: 165mm | Pression capacity: 11 500 kg | Pattern draw: 254mm | Jolt capacity: 625kg | Maximum depth of mou...

Double floor type grinder DÜRRSCHMIDT, Ø 760 mm x 80 mm

1 transversal axis motor SCHNEIDER, type; MJPP180MR4, serial number: 808820 22 kW, 220/380 V, 1450 rpm With 3 speeds by stepped pulley With sensor on the back of the visit door 2 exhausts, Ø 135 mm, Stone Ø 800 m...

Double floor type grinder MAPE, Ø 500 mm x 60 mm

• Manufacturer: Mape

2 motors VEM/ALMO, type: KPER122M2QU15252C4, serial number: 3217811091113834, 4 + 7,5 kW, 2880 + 2870 rpm, 380/660 + 400/660 V 2 speeds by cone pulley 2 file plates length 500 mm, width 220 mm weight +- 1300 kg W...

Double floor type grinder HUARD Ø 500mm, 45 m/s

• Manufacturer: Huard

Motor ABRITE, type: NA12564, serial number: 49574, 4,4 kW Shelves 1 x 410 x 230mm, 1 x 300 x 200mm With electronic control

Double floor type grinder DÜRRSCHMIDT, Ø 760 x 80mm

Type: VITEX, weight: ± 2300 kg Motor S.W., type: M00D33SP, serial number: 265977, 19 kW, 27 hp, 1440 rpm, 220/380 V Driving by cone pulley, 3 speeds Shelf 360 x 150mm Continuous speed 60 m/s Aspiration from the b...

Double floor type grinder DÜRRRSCHMIDT-VITEX, 760 mm, 50 m/s

Motor CEM, type: MJPP180M14, serial number: 543154, 18,4 kW, 1430 rpm, 220/380 V Driving by belts, stone max. 760 mm, width 60 m With control cabinet, continious speed 50 m/s

Double floor type grinder DÜRRSCHMIDT/VITEX, 760 mm, 50m/s

Motor CEM, Type: MJPP180MN4, serial number: L617626, 22 kW, 220/380 V, 1450 rpm Driving by beltsstone max 760 mm, stone width 60 mm Speed 50/s Files plates 260x90 mm (2x) With control cabinet

Moulding machine OSBORN 716 R4F, table 850mm x 530mm

Weight: 1900 kg | Dimensions: width 1000mm, depth 1300mm, height 1800mm | Pression stroke: 165mm | Pression capacity: 11 500 kg | Pattern draw: 254mm | Jolt capacity: 625kg | Maximum depth of moulding boxes: 686...