Used processing machines in Wallonia, Belgium

Sand aerator COLLIN

Carried by 2 belts trapezoid, t projector drum with 2 bars Suitable to be applicated under the grinder or in a little sandblast manufacture Sand is spitted in the pin. In good condition

Nobake moulding plant IMF

± 150 m rolling conveyor 4 x transfer wagons Mixer IMF, 30 t/h, equipped for furan process ROLLOVER with mould/pattern separation Mould manipulator IMF for overhead crane Painting station Pattern Fastloop

Degassing unit FOSECO

• Manufacturer: Foseco

Dimensions: Length: 1350mm; Width: 1160mm; Height: 2050mm 400V; 50Hz; 1,6kW; 540rpm With CE label on the machine For crane suspension

Core shooter RÖPER 2,5 l, turning table - automatic D1A

• Manufacturer: Laempe / Röperwerk

3-station turntable machine Simultaneous shooting and gassing As soon as the firing is finished, the automatic door opens and the operator can pick up the cores. With new NORGREN valve block With new SIEMENS TIA ...

Mobil articulated arm screw mixer AXMANN, 10 t

• Manufacturer: Axmann

Dimensions: length 7200 mm, width 1900/1500 mm, height 3600 mm With rail trolley With sand hopper With pneumatic brake With 2 pneumatic slides for sand inlet

1992 Green sand cooler SIMPSON MC200

Dimensions: total length 10 710mm, length of machine body 6750mm, width 3700, height 5900mm Electric control by PLC SIEMENSS5 Cooler bottom made of ceramic

1998 Core shooter LAEMPE LB20

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

Hopper with dischargingbelt

Bunker with extraction belt for moulding machine ULLRICH + ROSER Content ± 4,3 m³, belt, 650 mm x 600 mm Driven by moto- gearbox and chain Output ± 0,6 m³/min Shaft 1600 x 2000 mm, h. 1950 mm

1998 Gassing unit coldbox LÜBER LW-FDA-825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Gas pressure is regulated by proportional valve Gas dosing is made by high speed counting All parameters are introduced in the machine panel -gassing pressure -main gassing pressure -pressure ramp -gassing time -...

1999 Core shooter DISA, 200 l

Type: GFD 200 MP, serial number: KB0 001 Construction year: 1999, weight: 24 t Core box: Maximum height: 1340 mm, minimum: 870 mm Maximum width: 1500 mm, minimum: 530 mm Machine table: 1100 mm x 1300 mm, table li...

Induction furnace INDUCTOTHERM 3 x 6t

• Manufacturer: Inductotherm

With control 5140kVA; 4500kW; 200Hz With 2 transformers Primary voltage: 10500V; Secondary voltage: 595V; 50Hz; 2570kVA Melting and holding warm possible at the same time With loading machines With water pump sta...

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

Core shoter Röper-Lämpe LKV H12

• Manufacturer: Laempe / Röperwerk

Fully pneumatic machine With height adjustment of the table by means of a crank With slide rail for inserting the lower part of the core box into the machine With ejector plate below the core box With side clampi...

Sand plant DISA, 120 t/h

400 V, 50 Hz - Mixer DISA SAM16-160 - Sand hopper ± 150 m³ and continious sand circulation system - 3 additive hopper, dosing screws - Sand analyzer - Sand and additive weighing - Sand elevator - Polygon screen -...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...