Used controller in Wallonia, Belgium

Hardening furnace for Labo 260×140×600 mm 1150°C

• Manufacturer: Mahler

Dimension: Width: 750mm, Depth: 930mm , Heignt: 1440mm Usable dimensions: width: 260mm; depht: 600mm; Hight: 140mm Revolving door with thermostat and control box

Bench polisher 1side on the right

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Pouring trolley with 2 ladles 1000 kg

All movements hydraulic Cover hydraulically liftable and tiltable Cover with opening for filling and inoculating Heights hydraulically adjustable Trace measure 600 mm, splint 45 mm x 45mm, manual control

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side, with manuel valve With control box With declaration of conformity CE

Furan sand screw mixer BORDEN, ± 2 t/h with silo

Type: Micro 86, Serial number: 164 The mixer is hanging under the bunker External dimensions when fully mounted: 5800 mm x 2240 mm, h. 5400 mm Mixer motor UNELEC, TtypeT132M16; 4 kW; 960 rpm; 220/380 V Bunker wit...

Moulding machine Heinrich Wagner HRP 00

• Manufacturer: Heinrich Wagner

External dimension: Largeur: 700mm; Profondeur: 1200mm; Hauteur: 1630mm pressing power 6000kg with control desc and emergency stop Press head can be rotated by hand No jolting under pressing

Hanger type shot blast cabin 500 kg, GUTMANN

Type: PU119, serial number: 48271 With rotation system for shot blast plant With dust filter GIETARD, ± 6000 m³/h Ventilator 7,5 kW, 380/660 V, cleaned by air impulse Relay control

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

1992 Gravity die casting machine IMR C55

• Manufacturer: IMR

Dimensions: Length: 2600mm; Width: 2700mm; Height: 2000mm 5KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS S5 control unit

Mixing and transport screw, 1350/120mm

External dimensions: length 2350mm, width 300mm, height 300mm Motor: 1,1 KW, 380 V, brand BAUER, 50 Hz, type drive motor, 44 rpm With sensor for rotation control

2008 Compressor COMPAIR L80 R-75A

• Manufacturer: CompAir
• Model: L80

± 20,000 working hours Dimensions: Length: 2158mm; width: 1223mm; height: 1971mm ± 20 000 working hours Compressor screw renewed in 2013 With electric control for alternate working of the two compressors

1973 Shell moulding machine SHALCO U900

External dimensions: length 3900 mm, width 1900 mm, height 2100 mm 700/13 rpm, 1410/27 rpm Without control panel With belt outlet With hydraulic unit (400 V, 15 kW)

Gassing unit BORDEN BETASET 10

External dimensions: 850 mm x 570 mm, h. 1500 mm; feet: 360 mm Three-phase motor 220 V With control box, emergency stop switch and heating, 3500 W; 220/380 V

Ultrasonic cleaning bath 4L

• Manufacturer: Elma Transsonic

Extern dimensions: Profondeur: Ø300mm; Hauteur: 280mm Usable dimensions: Profondeur: 230mm; Hauteur: 130mm With ascillation controller HF 50KHZ Using contanence 4L ; With cable, plug and swith

Pouring Furnace PROGELTA GH3, 200 kW

• Manufacturer: PROGELTA

Hydraulically tiltable With channel inducteur, 200 KW, 400 V, 50 Hz With spare furnace body With spare inductor With emergency power generator New electric control in 2022 with PLC SIEMENS TIA Portal