Used controller in Wallonia, Belgium

Dust filter DEVAUZE, 3 000 m³ /h, filter surface 30 m²

Filter with 1 motor of 2,2 kW and the other one 5,5 kW In good condition With exhauster at the bottom With control cabinet With 9 vertical cartridges, cleaning by compressed air With some pipes and elbow joints C...

1993 Dust filter BMD, 58 500 m³/h, with cyclone

Construction year: 1993, weight: ± 10 000 kg DeltaP 420 DaPa Wih ventilator, motor 75 kW New cyclone built in 2005, not much used PLC control Siemens S5

2009 Amine Gas Washer BGT, 9000 m³/h

• Manufacturer: BGT

Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm

Hanger type shot blast cabin SIAPRO

• Manufacturer: SIAPRO

Door dimensions: Height: 1600mm; Width: 1200mm 22kW; 400V; 50Hz With 2 turbines (7,5kW) Y-rails With 2 hooks With small filter With grid reclaiming by DYN-air With control Mitsubishi

Double floor type grinder DÜRRRSCHMIDT-VITEX, 760 mm, 50 m/s

Motor CEM, type: MJPP180M14, serial number: 543154, 18,4 kW, 1430 rpm, 220/380 V Driving by belts, stone max. 760 mm, width 60 m With control cabinet, continious speed 50 m/s

Induction furnace INDUCTOTHERM 12t; 9MW

• Manufacturer: Inductotherm

With VIP Power Track control system Furnace on load cells With Meltminder 300 With 1 loading chute With hydraulic unit With 2 water pump stations WITHOUT cooler WITHOUT transformer With hydraulic ejector With flo...

NEW gassing units LÜBER LW-FDA 425

• Manufacturer: Lüber
• Model: LW-FDA 415

With heating 4 kW Max core weight 15 kg (± 10 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" With micro pump, gasdosing by rotameter Compressed air regulation by proportiona...

Moulding machine HEINRICH WAGNER HRP1.1

• Manufacturer: Heinrich Wagner

Outer dimensions: length: 850mm; width: 1300mm; height: 1950mm Moulding box min: lenght: 450mm; width: 350mm Moulding box max: length:1000mm; width: 600mm With control board and emergency stop

stainless corecoting mixing vessel G+F 115l

• Manufacturer: G+F

Dimensions: Lenght: 650mm; Depht: 1100mm; Hight: 1680mm 0,75KW; 685 r/min; 230/400V contenance: 115L with variable speed by frequency converter Danfoss niveau control over VEGA submersible transmitter wateradditi...

Core Shotter RÖPER - SODIM Automat, 5 l

• Manufacturer: Laempe / Röperwerk

Maximum dimensions of core boxes: width 340mm, depth 240mm, height 450mm With gassing plate Table movable to 4 directions With automatic clamping unit All mouvements by hydraulics With control Automat Telemecaniq...

Transport screw, 4500 mm, Ø ± 300 mm

External dimensions: length 4650 mm, width 680 mm, height 540 mm Engine: 2,2 kW, 380 V, brand BAUER, type drive engine, 1420/57 rpm Outlet Ø 160 mm With control door With double chaine drive

Mobile core sand mixer on rails SEGAB 120l

• Manufacturer: Segab

Dimensions: Mixer: Length: 2200mm; Width: 1000mm; Height: 1000mm Internal dimensions mixer: Ø700mm; depth: 450mm With loading station with hopper and sand cooler With SIEMENS S5 control unit Without dosing system...

Dust Filter DISA 50.000m³/h

• Manufacturer: DISA

Compressed air cleaning With discharge screw and double flap With silencer With chimney tube 16m (mounting on wall or frame) With fine dust measurement With auger conveyor and 2 big bag holders Bigbac holder on w...

2008 Dust collector LÜHR, ± 15 000 m³/h

• Manufacturer: Lühr

Type Df2,1/1,5/1,5 With exhauster and silencer Pneumatic filter cleaning Filter surface, ± 90m² 198 flat filter elements With new feet, cone and flap New platform New control board

Shake-out grid 3890mm x 3390mm

With eccentric axis, direct drive over cardan and progressif start With solid cone between shake-out grid and vibrating conveyor On 12 oscillating rubber elements Holes 55mm x 40mm With control board for the refe...