Used processing machines in Wallonia, Belgium

Bench polisher 1side on the right

With protection/extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Bench polisher 1side on the right

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Magnetic vibrating conveyor 1700mm x 510mm x 180mm

With cover and pneumatic trap on the exit Without control box (offer for control box on request)

Magnetic vibrating conveyor 1700 mm x 510 mm x 180 mm

With cover and pneumatic trap on the exit Without control box (offer for control box on request)

Vibrating convayor BMD 1260 mm x 550 mm

Motor FLOTTMANN, type: RUL800/14, 2 x 0.55 kW; 1420 rpm; 220/380 V

Alu melting furnace tiltable MORGAN, ± 600 kg, gas heated

• Manufacturer: Morgan

Engine brand ALMO, 2,2 kW; 1435 rpm; 230/ 400 V Gas burner ELCO, type EK 3.60 G-ZWA20 200 - 600 kW; 20 - 70 m³/h of natural gas With stairs With control box With hydraulic unit With crucible Ø 670 mm, height 900 mm

2100 mm x 800 mm x 105 mm,148 kg from iron

400 mm x 400 mm x 130 mm, 9 kg; welded

Special hose for amine gas, Ø 38 mm

Ø 38 mm x 54 mm; norm 6134/2005 For gassing unit wiht heating 16 kW

Laboratory drying furnace VEB, type 983

As good as new Useful dimensions: Ø 500 mm, depth: 350 mm With 3 shelves Thermostat max. 250°C

Small electric heater, 3000 W, S. PLUS

With support for the wall Weight: 3,5 kg | External dimensions: 500 mm x 310 mm, h. 65 mm | Motor: 3 kW, 3000 W

Bottom pouring ladle with planetary gear, 8 t

Brand: FOUNDRY SERVICE, serial number: 4827 With one bottom pouring device ,with out horizontal arm and plug bar are not inclluded With 2 pouring spouts

Moulding box for bending strength samples PRAM

Weight: 2 kg External dimensions: 275 mm x 85 mm, h. 85 mm Useful dimensions: 170 mm x 20 mm

Roller conveyor turning table, width 800 mm

With 5 rolls, width 800 mm, Ø 65 mm Mounted on ball slewing ring Rotatable by hand

Sandlabo sand compactability tester G&F, sand lab PVG

With manual hydraulic lever and sample sleeve Testing of the compactability Put sand from the container on to the funnel sieve and press through until the sand in the sample specimen tube overflows Carefully lift...