Used processing equipment in Wallonia, Belgium

1989 Dust conveyor FAT 75 l

Serial number: 1142, construction year: 1989 Air entrance 1'' Input sand Ø 150mm, output sand Ø 100mm With 2 sensors, the complete exhaust valve for dust is in good condition Sand output from above, out of basin ...

Drying chamber with hearth bogie, 5550 mm x 1350 mm x 2300mm

• Manufacturer: MOURATILLE

With 1 or 2 air circulation ventilators 11 kW, 240/440 V, 1450 rpm With 2 natural gas burners Pyronix typ 12 NMX and gas regulation equipment With hearth bogie, 5150 mm x 1 250 mm

Mobile sand bunker, ± 500 l, with discharge conveyor

• Manufacturer: Arena

Mobile bunker, 1260 mm x 760 mm, h. 950 mm, with cone With adjustable outlet slide Equipped for forklift transport Ideal for green sand, hand moulding

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...

Bunker with discharging conveyor ± 4,4 m³

Gear motor + brake SEW, type KA87TDVI32S4BMO/HF, 5,5 kW, 230/400 V, 1430 rpm, exit: 46 rpm 2 drums Ø 320mm Bunker equipped with PVC in the inside Rollings with rubber Bunker with frame and discharging conveyor Wi...

Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM

• Manufacturer: Inductotherm

Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...

Ladle heater, 2 burners

To be removed with chain hoist to place on ladle (for 2 ladles) (chain hoists not included!) With propane gas burner and fan With electric control for temperature regulation and new gas control equipment With 2 n...

Core sand mixer V+S, 120 l

• Manufacturer: Arena

External dimensions: length 1500mm, width 1100mm, height 1750mm Useful dimensions: depth Ø 800mm, height 500mm Motor: 9 kW, 380/660 V, brand V+S, 12,5 CV, 50 Hz, gear motor, 1450 / 31 rpm With al...

1999 Gazing unit LÜBER LW FDA 3250 32 kW

• Manufacturer: Lüber

32kW; 400V; 50Hz Dimensions: Lenght: ±1500mm; Width: ±900mm; Hight: ±1800mm The control for the gazing cycle is controled by the core shooter the unit is equiped by a smal amin vessel (±2l) with connection to a c...

Turbo screw mixer AXMANN, double articulated arm, output 5t/h

• Manufacturer: Axmann

Type: TMEG5, serial number: 4914 Motor BAUER, ± 9 kW; 380 V delta First arm equipped with belt conveyor Second arm Turbomix, 7,5 kW; 710 rpm Dust exhaust above the sans outlet; 0,95 kW; 8500 m³/h

1987 Hydraulic core shooter VOGEL & SCHEMMANN, 15 l

• Manufacturer: Vogel

Type: KSM61500 CB/0C02, serial number: 4323, Com. number: 18.828 In good condition Completely equipped in cold box, with cabin, automatic control, all the movements are hydraulic Max dimensions of core boxes: hei...

Ladle heater, gaz, on wheels 1450 x 900mm

Year of construction: 1973, weight: ± 200 kg Motor: AEG, type: AM9052, serial number: 279043, 1,5 kW, 220/380 V, 2820 rpm, 5,6/3,25 A With electrical equipment box, ventilator RVM 05/5-30, 5 m³/min. for natural g...

Core shooter GUT/KUHN, 100 l

• Manufacturer: Kuhn

Type: Mono 100, serial number: 0168 100 l core shooter for horizontal separatet core boxes With sand cooler/heather With roller conveyers With dust filter With automatic sand mixing unit (Mixer IMF) T36/6 The mi...

Ladle heater, gas, on wheels, 1450 mm x 900 mm

Year of construction: 1973, weight: ± 600 kg Motor AEG, type: AM9052, serial number: 27304, 1,5 kW, 220/380 V, 2820 rpm, 5,6/3,25 A With electrical equipment box, ventilator RVM 05/5-30, 5 m³/min., 14579 hours Re...

Grinder 1 stone and 1 grinding line MAPE

• Manufacturer: Mape

Type: MR408, serial number: 69-19654 3,5 Kw, 220/380 V, 50 Hz, 1500 rpm With switchbox TELEMECANIQUE Width of band 100mm, without shelf, with one reserve grinding line Stone side with shelf, width 120mm, length 8...