Used processing machines in Wallonia, Belgium

Vibrating dosing conveyor, useful dimensions 430 mm x 160 mm x 90 mm

Brand SAPIC With adjusting screw for the vibration way With magnetic vibrator

Screw conveyor 6050 mm, Ø 380 mm

Gear motor: BAUER, G32-10D174 283, 3 kW, 1420/57 rpm, 380/660 V With 3 filling hole 390 mm x 490 mm, distance 2740 mm Outlet Ø 190 mm With viewing door over the outlet

Screw conveyor 1600 mm, Ø 150 mm

Tube Ø 150 mm Motor BAUER, type: DKF941A/241; 1,5 kW, 2 hp, 380 V, 1420/185 rpm exit Center distance between in- and output 1600 mm Entrance Ø 400 mm reduced With 2 inspection doors 400 mm x 150 mm With pipe Ø 15...

Srew conveyor 2500 mm, Ø 150 mm

• Manufacturer: DIACO

Tube Ø 150 mm Motor BAUER, type DKF941AHZ241, 1,5 kW, 2 hp, 1420/89 rpm exit, 380 V Pipe Ø 150 mm, entrance Ø 285 mm - reduced With inspection door (as well as for emptying), 280 mm x 150 mm

Laboratory screen, Ø 200 mm

• Manufacturer: Chauvin Arnoux

Type: ROTO-LAB, serial number: 8474 With 10 screens 50, 71, 100, 140; 149; 160; 180; 200; 315; 400 micrometer.

Vibrating chut 3050 x 580 x 270mm

• Manufacturer: Küttner

Motor UHDE, type SM/20/4, serial number : 57720/24 5999/4, 1,1 kW, 1410 rpm, 220/380 V, 50 Hz, IP64 2 vibrating motors at the sides Input 1700 x 580mm Exit Ø 350mm, with 4 silent blocs

Core sand mixer 50 l, CFBI FENWICK

• Manufacturer: Fenwick

Gearmotor LO2, serial number: 101853, 3,5 kW, 1400 rpm, 220/380 V Discharge gate 270 x 160mm on the side, with cover

Casting ladle 2 t, SENSENBRENNER, with teapot spout

• Manufacturer: Senssenbrenner

With planet gearbox Ladle and refractory in good condition

Cooling conveyor ACME, 60000 mm x 1700 mm

• Manufacturer: Acme

Cooling conveyor: 60 m long, with hut and 2 vibrating generators (37 kW each) All conveyors have vibrating counterweights

Twin shake-out grid KÜTTNER, 2 pieces 4 x 2,5 m

• Manufacturer: Küttner

Two motors, 55 kW, SCHORCH, type KA7280MCB018Z, 985 rpm, 500 V Twin shake-out grid with 2 x 2 out-of-balance axles and 2 motors

Molding boxes, 760 mm x 400 mm x 100 mm, 19 kg

Steel molding boxes with trunions and 4 pip grips, crossbars, bushings R + O Ø 22 mm clamping ledges dimensions between axles 840 mm

New lining former ± 600 kg

Weight: ± 50 kg Outside dimensions: Ø 530 - 460 mm, h. 630 mm

Core sand mixing plant, ± 2 - 3 t/h

Brand: BADIE, serial number: 7,79 mixingcup contenance 60 lit. With batch mixer Mixtensif, type KSU100, Ø 600 mm, for 120 kg sand With sand hopper above the mixer With 2supports for 60 l drums With 2 pumps and PL...

Vibrator for lining furnaces and ladles

2 vibrating motors BOSCH, type 0618104008, 2860 rpm, 220/380 V With manual pneumatic valve 3 positions, pneumatic cylinder

Screw conveyor 3800 mm, Ø 300 mm WÖHR

• Manufacturer: Wöhr

Useful length 3800 mm Motor SEW, type RF82DV132S-4, 5,5 KW, 220/380 V, 1430/97 rpm (output) Entry and outlet Ø 200 mm Axle of the screw Ø 140 mm Incline 230 mm With dust extractor With fastening up- and downwards