Used controller in Wallonia, Belgium

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...

Hydraulic separating wedge DISA TK-3/300

• Manufacturer: DISA

With control panel With spring balancer Max working pressure: 300bar | Stroke of the wedge: 100mm | Jaws lenght: 265mm | Min wedge tip retracted: 26mm | Max wedge tip extended: 48mm | Cutting force: 20500daN | Hy...

Pneumatic Hammer HITACHI, HS5

• Manufacturer: Hitachi

With pneumatic 2 hand control Weight: 400 kg | Dimensions: length 1900mm, width 540mm, height 560mm | Shot axis: Ø 100mm | Air pression: 6 bar | Force of impact: 2805 Joule

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Gasing unit LÜBER LW-FDA-425; 4kW

• Manufacturer: Lüber
• Model: LW-FDA 425

With 4 kW heating Max. core weight 15 kg (± 10 l) With contactor control and stainless steel storage tank 30 l Compressed air connection 1" Compressed air control via proportional valve With micro pump, gas dosin...

2003 Rotary table shot blast machine RÖSSLER, Ø 1000 mm

1 turbine, 11 kW With control board Dimensions: length 3925 mm, width 3300 mm, height 3700 mm | Engine: 16 kW, 400 V, 50 Hz, serial number 31757/03 | Table ø: 1000 mm | Useful height: 400 mm

Water press pump for lining spayer

• Manufacturer: GRUNFOS

With surge tank 100 l and control box Weight: ± 200 kg | Motor: 1,5 kW, 2900 rpm, 240/415 V | Pressure: up to 15 bar, 4 m³/h

2006 Induction furnace INDUCTOTHERM 2 x 3t

• Manufacturer: Inductotherm

With pump station for control cabinet and furnaces as well as overflow station With hydraulic station and control panel With 2 furnace chairs with a capacity of 3 tonnes per furnace With pneumatic ejector for ref...

Dust filter KELLER, max. ± 8000 m³/h

• Manufacturer: Keller

Year of construction: 1988, weight: 2000 kg Motor LEROY SOMER, 9 kW, 2900 rpm, 240/ 400 V, 50 Hz With exhauster, compressed air cleaning and new control box for this cleaning Control box on request against extra ...

2008 Dust collector NEUBERG 8200 m3/h.

• Manufacturer: NEUBERG

Pneumatic filter cleaning, 6 bar Intake manifold inside, Ø 454mm Filter surface, 53 m² Exhaust MEB Without control box With control box for cleaning and pression Filter hoses from polyester needle felt, 550 gr/m²...

Lance for temperature measurement SIDERMES

With charger and test equipment For control elements 400 mm

2000 Gassing unit LÜBER LW FDA-16401i, 16kW

• Manufacturer: Lüber

Dimensions: Length: 1100mm; Width: 1000mm; Height: 1863mm With heating 16 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas dos...

Scrubber ARASIN GKOV 100 6.000 m³/h

Year of manufacture 1988 This unit consists of: Scrubber 6000 m³/h Air circulation pump New control box SIEMENS tia Protal Collecting tank around the scrubber Dust filter in the pipeline fresh acid pump New PH co...