Used loading in Wallonia, Belgium

1989 Vibrating shake-out drum FDC, type RV12-42, 5600 mm x 1200 mm

In good condition Output 20 t/h Passage time for the dark sable 7 min With vibrating conveyor for loading of 4000 x 900 mm Motor tube 2 x 3,5 kW, regulation of the motorized incline 2 kW, de 0 - 3°

1997 EIRICH mixer R 11, 300 l max .5-6t/h

• Manufacturer: Eirich
• Model: R11

With sand loading hopper and 1 additive hopper With EIRICH control board SIMATIC S5 With EIRICH water dosing and seperate control board With hydraulic unit (with new control board and new water dosing on request)

Steel scrap feeding device KÜTTNER for furnace

• Manufacturer: Küttner

With 2 vibrating motors UHDE, type SM20/4 On mobile peadestal Center distance: 1330 mm, driven by drum motor BAUER; 1,5 kW; 220/380 V Wth loading shank taper 1500 mm x 2000 mm

Induction furnace INDUCTOTHERM 3 x 6t

• Manufacturer: Inductotherm

With control 5140kVA; 4500kW; 200Hz With 2 transformers Primary voltage: 10500V; Secondary voltage: 595V; 50Hz; 2570kVA Melting and holding warm possible at the same time With loading machines With water pump sta...

Mobile core sand mixer on rails SEGAB 120l

• Manufacturer: Segab

Dimensions: Mixer: Length: 2200mm; Width: 1000mm; Height: 1000mm Internal dimensions mixer: Ø700mm; depth: 450mm With loading station with hopper and sand cooler With SIEMENS S5 control unit Without dosing system...

Lining spraying unit SAS 3

Type : III E7, serial number: 3190 With loading container, hand slide valve for lift track and long flex pipe Filling hole wicht pneumatic clap Spraying system over screw With motor and frequency converter On 3 w...

Mobile continuous mixer WÖHR, 20 - 40 t/h

• Manufacturer: Wöhr

Mixer length: 8.300 mm (first arm: 5.300 mm, mixer arm: 2500 mm) 2 pumps for furan sand Flow control (Endress & Hauser) Mobile on 1 rail on the ground and fixed on a side of building With loading belt, length 50 ...

Alu melting furnace STRIKO, gas fired, content 1000 kg

• Manufacturer: Striko

Furnace for natural gas with 2 burners for melting chamber and 1 for holding and casting chamber With hydraulic tilting, with loading skip, with control box, with chimney With gas installation KROMSCHRÖDER Conten...

Wedge penetration tester Böhler 5000 Kp

• Manufacturer: Bohler

Dimensions: Length: ±400mm; Width: 400mm; Height: 650mm Motor: Type: NL 56B4; 0,9KW; 220/380V Hydraulic max 100bar, wedges pression 11 up to Kp/mm² ultimate breaking load 1000 up to 5000Kp, 2 sheeds, performance ...

Shotblast cabinet DISA SPH2-55/12

Dimension: Lenght: 2250mm; Depth: 2200mm; Hight: 3100mm; Useful dimensions chamber: door: 970mm; back wall: 620mm; depth: 620mm Shotblast cabinet with double shotblast chambre With 2 turbines 5,5kW Electric contr...

1979 Tumble belt shotblast machine OMSG, batch 1.500 kg

• Manufacturer: OMSG

Type: SG4H, serial number: 1801 ± 30 kW, 380/660 V For batches maximum 1500 kg With 1 turbine of 22 kW With cleaning screens, bucket elevator, control cabinet Loading via bucket conveyor, with cable hoist for buc...

Induction furnace INDUCTOTHERM 20t and 25t

• Manufacturer: INDUCTOTHERM Power Trac

With 2 water pump stations (for furnace and control cabinet) With 2 cooling towers (closed cooling circuits) With 1 hydraulic unit with separate pumps With 1 ABB transformer With 1 control cabinet for both furnac...

Induction furnace JUNKER 2x 4t

• Manufacturer: Junker

Crucible dimensions: Ø780mm; height: 1475mm Melting and holding warm possible at the same time With 2 loading conveyors With 2 water pump stations With hydraulic unit With control cabinet SIEMENS S5 control With ...

Tumble belt Shotblastmachine with rubberband and dust filter, OMSG

• Manufacturer: Arena

External dimensions: 1900 mm x 1700 mm, h. 3450 mm (with elevator) Speed variable by frequence converter Motor for belt AC-MOTOR, 0,75 KW, 220 / 380 V, 1370 rpm Pneumatic filter cleaning Ventilator ELEKTRON, type...

Sand reclamation SEGAB/ KLEIN, 20 t/h

• Manufacturer: Segab

Shake-out SEGAB, max. loading 20 t, dimensions 5 m x 3 m 3 x sand feeder SEGAB Reclaiming SEGAB: - Hot sand silo 150 t - 2 x attrition unit KLEIN - 1 x fluid bath cooler - 2 x sand feeder KLEIN - Electric control...