Used engine in Wallonia, Belgium

Overband magnet 650 mm, 2,2 kW

• Manufacturer: EUGEN SEITZ

External dimensions: length 1700 mm, width 1050 mm, height 580 mm Engine: 2,2 kW, 220/380 V, type: drum engine With suspensions on wheels for an easier dismantling

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

Drying chamber with hearth bogie, 5550 mm x 1350 mm x 2300mm

• Manufacturer: MOURATILLE

With 1 or 2 air circulation ventilators 11 kW, 240/440 V, 1450 rpm With 2 natural gas burners Pyronix typ 12 NMX and gas regulation equipment With hearth bogie, 5150 mm x 1 250 mm

2000 Gassing unit LÜBER LW FDA-16401i, 16kW

• Manufacturer: Lüber

Dimensions: Length: 1100mm; Width: 1000mm; Height: 1863mm With heating 16 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas dos...

Swing vibrating, 3000 mm x 280 mm x 130mm

Brand: LOCKER, type: LDD300/3000 Motor INVICTA, type B925/4, serial number 107733, 0, 5 kW; 1440 rpm, 415 V With two vitrating engines, 2 feet and lining

Ladle heater, 2 burners

• Manufacturer: Brenner

To be removed with chain hoist to place on ladle (for 2 ladles) (chain hoists not included!) With propane gas burner and fan With electric control for temperature regulation and new gas control equipment With 2 n...

Hydraulic unit, 3 kW

Engine: 3 kW, 24 V,165 Amp. brand: HAGGLUNDS, type: MTL9-7A, 3250 rpm, serial number: 1213378 With hand valve ' lever up -motot start and oel press , lever down oil return - lower

1963 Fixed melting furnace FULMINA, natural gas, 300 kg

With natural gas burner JUNKER and command LANDIS GYR, type: LFL1.635 With crucible A300

1990 Tilting crucible furnace HINDENLANG, aluminium, gaz heated, 800 kg

• Manufacturer: Hindenlang

Tiltable furnace HINDENLANG, melting and warm holding Electric control board With stage and extractor hood With exhaust gas stack

2008 Cartridge dust collector ESTA, 36 000 m³/h

Engine: 55 kW, 400 V, 50 Hz, typ MDV-55, seriel number 08003130 With 27 cartridges made of polyester needle felt With compressed air cleaning With control board With silencer 1 recuperation cone and pneumatic dus...