Used engine in Wallonia, Belgium

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating

2010 Kleemann Ms16

• Manufacturer: Kleemann - Reiner

Brand: Kleemann Model: MS16 Type: sizing screen Year: 2010 2 deck Engine rebuild 100h Total hours 11500h Configuration: 0/20,20/31,5 , 31,5/63mm Magnet

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating

Gasing unit LÜBER LW-FDA-425; 4kW

• Manufacturer: Lüber
• Model: LW-FDA 425

With 4 kW heating Max. core weight 15 kg (± 10 l) With contactor control and stainless steel storage tank 30 l Compressed air connection 1" Compressed air control via proportional valve With micro pump, gas dosin...

2022 Cupola filter with cooler GARANT 40.000m³/h

• Manufacturer: Garant

Filter system With discharge screw and motorised double flap With fan With GARANT gas cooler With cooler cleaning, 200Pa, 0.7kW With fresh air flap 1500mm x 350mm With hopper and motorised double flap and big bag...

Automated core shooter RÖPER H5

• Manufacturer: Laempe / Röperwerk

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

Shake-out grid 1780mm x 1170mm

• Manufacturer: FM Industries

Brand: FM IndustriesWeight: 800kgOutside dimensions: 1900mm x 1900mm x 1130mmInner dimensions: 1780mm x width 1170mmEngine: Leroy Somer4 kW; 220/380 V; 1430 rpmRust mesh 30 x 25mmV-belt drive 3x for green sand,wi...

1 stone saw, diamant blade, Ø 350 mm

• Manufacturer: Norton

Engine LEROY SOMER: 3 kW, 220/380 V, type LS100L1, 2830 rpm With 2 tables actived by food pedal Tables: 1 x (455 mm x 345 mm) and 1 x (530 mm x 400 mm)1 table left-right mitred adjustableWith emergency stop switch

Hebenstreit 70 plate flat wafer line, jumbo plate size

• Manufacturer: Hebenstreit

flat wafer baking and creaming line comprising:- Hebenstreit wafer oven. 70 plates – gas fired, Hebenstreit arch cooler, Hebenstreit wafer book creamer with top wafer station and press, Hebenstreit vertical c...

1994 Core sand mixer 50 L BADIE

Type: KSU 50Serial number: 3/233 / 5AUConstruction year: 1994Weight: ± 225 kgExternal dimensions: length 900 mm, width 700 mm, height 1220 mmEngine: SEW 3 CV; 380 VDrum Ø 500 mm, using height 250 mmPneumatic disc...

Thermic sand reclamation plant IMF, 1 t/h

Comprising: Combustion chamber, cooler, fluid bed Sand silo 6 m³ Dust collector ± 18000 m³ /h, cleaning by air impulse Control automat Siemens 7 Without sand feeder, cooling tower and water pumps (available again...

Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM

• Manufacturer: Inductotherm

Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...

Dust collector LÜHR ± 80 000 m³/h

• Manufacturer: Lühr

Type: MWF2.5 / 4.0 / 2.0Year of construction: 1981Estimated weight: ± 25 000 kgDimensions: 9500 mm x 4400 mm x 8850 mmEngine LOHER, type A315M1A4, 132 kW, 1485 rpm, 380 V.With chimney ± 21 m, Ø 1300 mmWith podium...

Furan sand srew mixer BORDEN, ± 5-10 t

• Manufacturer: BORDEN

external dimensions: length 3100 mm, width 1300 mm, hauteur 2200 mm engin: flanged; 13,2 kW; 230/400 V; 720 rpm/min; brand Siemens between axe input and exit 1700 mm Ø of the tuve 240 mm command over automat TELE...

Small bucket elevator for shot blast plant

Filling height from the ground 450 mm Drop height from the ground 1860 mm Drive over 2 V-belts Cup 100 mm x 80 mm