Used processing machines in Wallonia, Belgium

Sandpapering machine ENDE 500x500x1100mm

Double grinder, Ø 600mm, continuous speed

Motor (2x) ZIEGLER, type: N16b2, serial number: 1/5621 2/56716, 3 KW, 4 hp, 220/380 V, 2890 Hz 3 differents speeds by stepped pulleys With electriccontrol Continuous speed 45m/s

Double floor type grinder, Ø 550mm

In good condition Width 70mm Constant speed ± 45 m/s

Sand papering machine 1x plaine, 1x cylinder

• Manufacturer: ZEISS-APTON

Type: 1RA300, serial number: 14057 Motor SACHSENWERK, type: AD2-5/4, serial number: 362854, 1,2 kW, 220/380 V, 1410 rpm Ø plain 395mm, cylinder for sandpaper Ø 110mm, length 150mm With suction hood 2x, suction tu...

Simple floor type grinder RICHARDS Ø 760mm

1962 Double grinder, foundry, Ø 600 mm, continuous

• Manufacturer: BAUTENBERG

Type: SS6/45/25, serial number: 1653 Motor HELIN, type DKH 15- 4; 2 x 5,5 kW; 1430 rpm; 380/660 V Continuous speed with 2 motors and 4-step pulley

Pendulum grinder, Ø 400 mm, width 65 mm

Motor SIEMENS, type 1LA27722AA40, 5,5 kW, 380 V, 2930 rpm With belt drive

Tumble belt shot blast machine completely overhauled 7,5 kW SCHLICK

• Manufacturer: Schlick

Brand: SCHLICK, type: MBO, weight: ± 1200 kg External dimensions: 2100 mm x 2000 mm, h. 5000 mm Useful dimensions: Ø 600 mm, width 800 mm Door: 1000 mm x 800 mm (height) With new turbine RUMP, 7.5 kW, 380/660 V...

Vibration polishing machine ROTO FINISH, 1100 mm x 420 mm

4 kW, 380/440 V, 7 A, turns left-right Ø 220mm trap exchange stones Vibration by unbalance motor Vibration with stones and water Rubber inside, in good condition With polishing stones Without control box Delivery...

2003 Rotary table shot blast machine RÖSSLER, Ø 1000 mm

1 turbine, 11 kW With control board Dimensions: length 3925 mm, width 3300 mm, height 3700 mm | Engine: 16 kW, 400 V, 50 Hz, serial number 31757/03 | Table ø: 1000 mm | Useful height: 400 mm

Gravity casting machine, useful dimensions 450 mm x 600 mm

Operated by a pneumatic cylinder, Ø 200 mm 2 guide rods, Ø 65 mm, 1750 mm x 600 mm, h. 720 mm Has been used with moulds 50 mm x 420 mm x 540/350 mm

Hammer mill HAZEMAG, 1050 mm X 300 mm

• Manufacturer: Hazemag

Motor: Couleur LAHMEYER, 18,5 kW, 25 CV, 1455 t/min, 380/600 V Rotor with 4 axes Up to solid steel construction with 4 feets. With vibrating conveyor under the hammer mill 1900 mm x 600 mm With 2 vibration motor...

1988 Jolt squeeze moulding machine KÜNKEL WAGNER APM-S-2

• Manufacturer: Künkel Wagner

With c ontrol box AEG Automate Logistta A020 With two-hand control desk

Double floor type grinder DÜRRSCHMIDT Ø 760 mm

Motor Type : 9234 DCAP, serial number : 322337, 11,2 Kw, 15 hp, 1425 rpm, 3 x 220 / 380 V Stone Ø 600 mm, width 60 mm Drive with 4 pulley Files plates 300 x 200 mm

1964 Floor type grinder lapidaire, Ø 760 mm

Type: 76 LU - GV, serial number: E469 Overhauled Speed 45 m/s Stone of Ø 760 mm