Used table in Wallonia, Belgium

Modell inside sandpapering machine ENDE

• Manufacturer: ENDE

Dimensions: length: 500mm; width: 500mm; height: 1100mm Dimensions of the table 500mm ×500mm; height from the ground: 1000mm With 2 speeds With 10 tools (10-150mm)

Moulding machine BMD ARPA1

Table 500 mm x 660 mm With jolts, press and removal from the mould successive Pression 4000 kg, vibrator 180 kg adjustable150/200/250 mm Foundation needed 275 mm Hand operated

Core Shotter RÖPER - SODIM Automat, 5 l

• Manufacturer: Laempe / Röperwerk

Maximum dimensions of core boxes: width 340mm, depth 240mm, height 450mm With gassing plate Table movable to 4 directions With automatic clamping unit All mouvements by hydraulics With control Automat Telemecaniq...

Moulding line for chemical sand FDC/AXMANN

• Manufacturer: Axmann

With sand regeneration With AXMANN- mixer 30 rpm, connection arm, pumps, cistern 2000 l With vibration table, robust roll conveyors 3 motorised transfer carriages With cooling vibrating conveyor, length 18 m With...

1977 Profile beltgrinder for model builder ZIMMERMANN

• Manufacturer: Zimmermann

Type: PS, serial number: 603 Construction year: 1977, weight: ± 300 kg Useful dimensions: width 500 mm, depth 500 mm, height 240 mm With graduated and pivoted table 500 x 500 mm With 2 motorspeeds

Mobile motorized turntable, Ø ± 1500 mm, ± 10 t

Motor DEMAG, type KBF71B8/2, 430 rpm outlet, 380 V Working disc Ø 1500 mm, made out of wood Track gauge 60 mm, height 10 mm With cable roll-up device Table rotation manually

Mobile motorized turntable, Ø ± 1500 mm, ± 10 t

Motor DEMAG, type KBF71B8/2, 430 rpm outlet, 380 V Working disc Ø 1500 mm, made out of wood Track gauge 60 mm, height 10 mm With cable roll-up device Table rotation manually

ridge grinding unit with diamanted disc Ø300mm

Dimensions: Width: 950mm; Depht: 580mm; Hight: 1120mm Table 300×220mm; disc 300/4mm Working hight 940mm for deburring smal parts boring wheel Ø24 with ring Ø40 mm without emergency stop

Core shoter Röper-Lämpe LKV H12

• Manufacturer: Laempe / Röperwerk

Fully pneumatic machine With height adjustment of the table by means of a crank With slide rail for inserting the lower part of the core box into the machine With ejector plate below the core box With side clampi...

Silicone moulding press for centrifuge, 2 x 350mm

Brand AB, type: S2000, serial number: TRF2/350 Giri 300-700 Pneumatic press with 2 swivel tables Ø 350 mm For silicone pattern discs For centrifugal casting of small parts like jewellery, figurines, medals, etc.

Band grinder MAFAC KS 450-1

• Manufacturer: Mafac

Dimensions: Width: 640mm; Depth: 1520mm; Hight: 1050mm Table 190×140mm; Working hight: 770mm ( possibility with increase: +140mm) With relais control With motor broke and emergency stop Intake manifold Ø160/120mm...

1997 Moulding line BELLOI & ROMAGNOLI, 650 mm x 650 mm x 200/200 mm

Type: BRAP/4, construction year: 1997 Moulding line BELLOI & ROMAGNOLI hydraulic squeeze with rotating table With: - roller conveyors for return line (11 meters long) - roll-over (manual drive) - hydraulic statio...

Moulding machine OSBORN 722RF

Type: 722RF, weight: 4300 KG, serial number: 71.47, in good condition Jolt capacity 950 KG Press elevation 305mm Jolt and pressure at the same time Table 1060x720mm Press force 22.000KG Max. width of flasks 1050mm

Furan sand mixer ±4-5t/h OMEGA

• Manufacturer: Omega

Mixing arm movable With 3 daily hoppers, 1m³ each With 1 dosing screw With 2 roller conveyors; length: 2950mm; length: 4100mm With Mitsubishi D700 control unit ±12KW, 380V; 32A With 2 pumps Without steel construc...