Used feeder in Wallonia, Belgium

2007 Sand feeder 31 liters, KLEIN

• Manufacturer: Klein

Inlet Ø 145 mm With control valves Inlet closure by cones Air supplied from below rather than from the pneumatic cylinder above Advantages: Lower air consumption per tonne and less wear and tear Maximum continuou...

2007 Sand feeder 31 liters, KLEIN

External dimensions (as double item): 1400 mm x 1000 mm, h. 1600 mm External dimensions (single item): 550 mm x 550 mm, h 1600 mm Sandinlet Ø 145 mm Sandpipe Ø 100 mm With control valves Sends air from below and ...

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side, with manuel valve With control box With declaration of conformity CE

Dust/sand feeder FAT, ± 30 l

Serial number: 1176, year of construction: 1989 With compressed air acceleration into the bottom Input Ø 205 mm, exit Ø 50 mm With pneumatic cone With control valves

2006 Pneumatic sand feeder, 75 l

With sand pipe bend With control equipment, 24 V Weight: ± 80 kg | Dimensions: width 1000mm, depth 800mm, height 1000mm | Contenance: 75 l | Working pressure: 8 bar

Sand feeder FAT, 1000 l, CE

Input Ø 275 mm; exit Ø 110 mm With 2 sensors and pneumatic valve Closing by cone on the input side With declaration of conformity CE

1995 Pneumatic sand feeder FAT 500l

Sand feeder; FAT brand Capacity 500 litres 8 bar operating pressure With control unit

1995 Pneumatic sand feeder FAT 500l

Sand feeder, brand FAT Capacity 500 litres 8 bar operating pressure With control unit

Sand feeder FAT, capacity 1000 l CE

With 2 sensors, with cone valve at sand inlet Input Ø 190 mm Exit Ø 110 mm, air input 1", with CE badge

Pneumatic sand feeder HENSEL 100l

• Manufacturer: HENSEL

Dimensions: Length: 1160 mm; Width: 800 mm; Height: 1320 mm Max. temperature = 200 °C

2013 Pneumatic sand feeder KLEIN 75 l CE

Max. pressure 7 bar With pneumatic cone fastener Inlet Ø 100mm Outlet Ø 70mm With CE n° 0045

Pneumatic sand feeder KLEIN 260 l

With 2 possibilities inlet and exit With cone fastener

2007 Pneumatic sand feeder SEGAB, 288 l, CE

• Manufacturer: Segab

With pneumatic cone fastener Inlet Ø 160 mm Outlet Ø 100 mm With CE 0044

1997 Core sand reclamation with pneumatic sand feeder

• Manufacturer: Segab

Core sand crusher With 2 vibration motors; 4kW With steel construction and intermediate hopper Pneumatic conveyor: With old control cabinet SIEMENS S5

Vitbrating crusher, sand feeder and control cabinet, ± 5-10 t/h

• Manufacturer: Klein

Year of manufacture: 1990, weight: ± 3200 kg With sandfeeder KLEIN 75 l, N.8680 height 1400 mm outlet Ø 70 mm, with control (SIEMNS S5) Possibility to construct in supplement a shake-out rust of the crusher (att...