Used 3 phase in Washington, USA

Ameri-Cure Heated Paint Booth

• Manufacturer: Ameri-Cure
• Phase type: Three-phase

Ameri-Cure Heated Paint Booth 10 HP motor Gas-fired heating Lighted interior Fire suppression system Drive-in double door Personnel door Control panel

Rogers Quincy Northwest Rotary Screw Air Compressor 100 hp QNW-V-100-E

• Manufacturer: Quincy

Rogers Quincy Northwest Rotary Screw Air Compressor 100 hp QNW-V-100-E. Condition is Used. Shipped with Flat Rate Freight.

6” stainless steel screw auger conveyor with hopper

• Manufacturer: Unknown

6” stainless steel screw auger conveyor with hopper 10ft long screw auger 6 +- inch diameter stainless auger Screw flighting thickness 1/4 inch +-. Stainless infeed hopper 38”wide x 67” long x 19”deep Additi...

6” stainless steel screw auger conveyor & hopper

6” stainless steel screw auger conveyor & hopper 10ft long screw auger 6 +- inch diameter stainless auger Screw flighting thickness 1/4 inch +-. Stainless infeed hopper 38”wide x 67” long x 19”deep Additional top...

Dust Collector, 4,500 SF, 50,000 CFM, High Temp, Insulated, #5991542

• Manufacturer: The New York Blower Company

Dust collection system designed for high-temperature particulate capture. Includes (3) insulated baghouse modules with pulse-jet cleaning and 480V Hotfoil HB blanket heaters (5,304W each, 150–650°F range), rated ...

Weldotron 7321 heat shrink tunnel 28” x 16”+-

• Manufacturer: Weldotron

shrink wrap tunnel Serial# KI55273 Can provide video of tunnel working We have other tunnels and wrappers in our inventory. We will build a shipping crate at no cost. Contact us for a freight rate.

G&D CHILLERS GD-7H #987736

• Manufacturer: G&D

GLYCOL CHILLER, 7HP, 60 RES. GALLONS, 3-PHASE

Goff 1244 Spinner Hanger

• Manufacturer: Goff
• Model: 1244

Goff Spinner Hanger Shot Blasting Machine, Year 2011, Model 3672-D, with Dust Collector (if desired). Previous owner reported that it was taken out of operation in working condition. Have cleaned out media. Seve...

Quincy 10 HP air compressor, model 340

• Manufacturer: Quincy

Quincy 10 HP air compressor, model 340 32 541261 S 208-220/440 volt 3 phase S.F. 1.15

12ft x 18"+- troughing belt conveyor,

Red Line Systems serial # RL03123127 Cleasby MFG., Model# SD-2-12 Truss Type frame Top Drive 1HP, 3 phase, 208-230/460 volt Watch attached video Contact us for pricing and freight rate

12ft x 18inch troughing belt conveyor, Red Line Systems conveyor

serial # RL03123127 Cleasby MFG., Model# SD-2-12 Truss Type frame Top Drive 1HP, 3 phase, 208-230/460 volt Watch attached video Contact us for pricing and freight rate Watch attached video

15HP direct drive paddle wheel fan

13” inlet 12” outlet/discharge “? wheel diameter 8” wheel width 15 hp, open drip G.E. motor 220/440 volt 3 phase Starter not working, Buyer will need to replace the starter We have several other fans and motors a...

Eastey heat shrink tunnel ET 22-20-MBV2

• Manufacturer: Eastey

Eastey heat tunnel, inside chamber size 24 wide cx 20” tall 220 volt, 3 phase, 50 amps, Model ET 2 (z?) 120-MBV2 Serial# ET242052120402, weight 1,000 lbs, A Videoo of it runing is attached to the photos No charge...

Murphy Rodgers MRM 10, 2600 CFM, 256 Sq. Ft. filter cloth

Murphy Rodgers MRM 10 7 ½ HP Baldor fan motor 208-230/460 volt 3-phase CFM 2,600 @ 6” WG. 30 filter bags 256 Sq.Ft. filter cloth area 10” diameter pipe inlet- dust inlet Manual shaker can test run fan and provide...