Used working in doitsu

Lift-A-Loft AMR487 Not in working condition Asset# 1659931

• Manufacturer: Lift-A-Loft

No longer needed and doesn't work. Item located in Indianapolis IN Any questions call Melissa Phillips (317) 903-3958. The condition of items are "As is, where is”.>> Only items described herein is included in sa...

Lift-A-Loft AMR486 Not in working condition Asset# 1659396

• Manufacturer: Lift-A-Loft

No longer needed and doesn't work. Item located in Indianapolis IN Any questions call Melissa Phillips (317) 903-3958. The condition of items are "As is, where is”.>> Only items described herein is included in sa...

FPEC 145 Work Platform

• Manufacturer: FPEC

FPEC 145 Work Platform. All stainless steel worker platform. 13′ long x 7’5″ wide x 5’5″ tall mezzanine. Includes 9′ tall hand rails, (1) set of entrance & exit stairs for the work area.

CARIBBEAN METAL AND WILSON WORKS Sanitary Stainless Steel Transfer Tote

• Manufacturer: Wilson

(25) 48 Cu.Ft. (360 Gallon) Sanitary Stainless Steel Transfer Tote/Vessel. 4' Dia. x 31" T/T with 32" deep cone. Approx. 8" Butterfly valve discharge with 4" ground clearance. Approx. 78.5" Overall Height. Built...

make and model , Thermoforming machine, in non-working condition, with approx. 10' width ...

• Manufacturer: John Deere

(1) make and model unknown, Thermoforming machine, in non-working condition, with approx. 10' width x 5' depth work area, adjustable height 65" width x 33" depth steel stand, does not include tooling, unit is equ...

Duct Work

One (1) Lot of miscellaneous HVAC duct work parts and pieces. Quantities unknown. Additional items may also be pictured; however, they are not included in the lot and should not be taken into consideration when d...

Crown Iron Works 48

• Manufacturer: Crown

Used Crown Iron Works, Model 48, Milling Flash Drying System. Major components include: 48"dia Ring Flash Dryer (MFD-105) manufactured by Crown Iron Works, 30000 SCFH @30psig gas train, Forced Draft Blower (F-102...

Dust Collection System & Duct Work Included

Dust Collector, Blower & Controls, Manuf. Ceragioli Carlo & C, Collector s/n: CUBOFIX 10C, Blower Mod: NR801UL/CSA, s/n 220647033-10342, Italsime s.r.l. Controls Mod: 1648/22 and other Dust Collector Components, ...

CONVEYOR WORK-PIECE LATERAL POSITIONER/EVEN-ENDER

• Manufacturer: CONVEYOR WORK-PIECE LATERAL POSITIONER/EVEN-ENDER

CONVEYOR WORK-PIECE LATERAL POSITIONER/EVEN-ENDER S-5017 General Specifications: *Additional specifications available upon request*

IKA Works MK 2000/50

• Manufacturer: IKA
• Model: MK 200050

Unused 150HP IKA Works Colloid Mill Model MK 2000/50. Stainless Steel. Rotor speed 1265 RPM. Max throughput 80000L/hr. 150HP 460V/60Hz TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. CS ...

IKA Works DR 2000/10

• Manufacturer: IKA

Used 30 HP IKA Works Dispax Reactor High Shear Inline Disperser, Model DR 2000/10, Stainless Steel. Nominal flow rate 35 gallons per minute, nominal tip speed 4500 feet per minute. Driven by a 30hp, 3/60/230/460 ...

IKA Works MK 2000/50

• Manufacturer: IKA
• Model: MK 200050

Unused 150HP IKA Works Colloid Mill Model MK 2000/50. Stainless Steel. Rotor speed 1265 RPM. Max throughput 80000L/hr. 150HP 460V/60Hz TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. CS ...

IKA Works MK 2000/50

• Manufacturer: IKA
• Model: MK 200050

Unused 150HP IKA Works Colloid Mill Model MK 2000/50. Stainless Steel. Rotor speed 1265 RPM. Max throughput 80000L/hr. 150HP 460V/60Hz TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. CS ...

IKA Works DR 2000/10

• Manufacturer: IKA

Used 20 HP IKA Works Dispax Reactor / 3 Stage High Shear Inline Dispersing Mill. Type DR-2000/10. Model P010082. Maximum flow rate 35 gpm (8,000 liter). Tip speed approximately 23 m/s (4500 fpm). Maximum process ...

2000 TATE METAL WORKS 1,000 GALLON

• Manufacturer: TATE METAL WORKS

Used 1,000 Gallon Horizontal T316L Stainless Steel Splitter Vessel Manufacturer: Tate Metal Works Year: 2000 Capacity: 1,000 gallons Dimensions: 54.75" diameter x 7'9" straight side 150FV at 450 degrees F Dished ...