Used processing machines in doitsu

Miller Filtair Capture 5

• Manufacturer: Miller
• Model: FILTAIR CAPTURE 5

Miller FILTAIR Capture 5 Portable Fume Extraction System with 10′ Extraction Arm: Processes: – Stick (SMAW) – Flux-cored (FCAW) – MIG (GMAW) – TIG (GTAW) Accu-Rated™ Airflow: Measured at the hood: 900 cfm (425 L/...

3 hp paul o. abbe ball mill

• Manufacturer: Paul O. Abbe

Used 3HP Paul O Abbe Ball Mill. Jacket chamber approximate 18" diameter x 23" long. Driven by a 3hp, 3/220/440 volt motor. Mounted on a painted carbon steel frame.

1 hp blue tech inc. hammer mill

• Manufacturer: Blue Tech Inc.

USED STAINLESS STEEL HAMMERMILL BY BLUE TECH, INC. SERIAL # BT-10-00-5946-L. FEATURES ALL STAINLESS STEEL CONTACT SURFACES WITH POLISHED FINISH, SINGLE SCREW FEED FROM HOPPER, APX 7/8" OD AND DRIVEN BY LESSON 1/3...

2023 Vacudest L 8.000

• Manufacturer: Vacudest

8000 m³/year Specifications: Composition of the industrial wastewater to be processed: (with modifications < 20 g/l)

Sonitek SU-10LB Thermal Press Heat Staking Machine Set 6 Zone PLC Control 3Ph

• Manufacturer: Sonitek

Used, in Good Working Condition. Selling as a set. Right and left. We were not able to fully test. Heating units all heat up as they should. Has PLC temp controls and sensors. Not sure on the voltage. Original ta...

Ricoma EM1010-7S

• Manufacturer: Ricoma

– Machine reads multiple design formats such as DST, DSB and more – 220° wide angle cap system – High-Definition True-Color 7-inch LCD Touch Screen – External 100° button and trimming button

Taylor C716-33

• Manufacturer: Taylor
• Model: C716-33

Machine type: Process Equipment | Machine location: Florida | Stock #: 484635 | -flavors: 2 + Twist | -freezing cyclinders: Two, each 3.4 quarts | -mix hoppers: Two, each 20 quarts | -mix delivery system: Air/Mi...

1HP Process Control Laboratory Lab Grinder Granulator Model GCANOIN

• Manufacturer: Process Control

S/N-12486A. Power rating is 460 volt, 60 hz, 3 phase. Process control corporation fan I.D. Tag is model FNN5N3C11, S/N-24134A, date 10/14/86 and 460 volt, 3 phase, 60 hz power rating. Unit is a combination shr...

50 hp denver equipment co. ball mill

• Manufacturer: Denver Equipment Co.

Used Denver Equipment Skidded Ball Mill. 50 HP motor, 4' dia 8' length. Built 1984. Previous use: Lime Slaking

Uline Model H-959 Poly Strapping Machine – 071725000777A

• Manufacturer: Uline

Taylor C716-33

• Manufacturer: Taylor
• Model: C716-33

Machine type: Process Equipment | Machine location: Florida | Stock #: 466120 | -flavors: 2 + Twist | -freezing cyclinders: Two, each 3.4 quarts | -mix hoppers: Two, each 20 quarts | -mix delivery system: Air/Mi...

2020 Munck 15 Ton Transfer Cart

• Manufacturer: Munck

Machine type: Process Equipment | Machine location: Upon Request | Stock #: 774131 | Capacity: 15 TON (30,000 LBS) | Table size: 35’x13.5′ | Cart speed: 0-50 FPM VFD [2 X 5.0HP] | Cart deck: Steel Plate | Wheel ...

2011 Fournier 4(6)-900/6000CV

• Manufacturer: Fournier

Machine type: Process Equipment | Machine location: Upon Request | Stock #: 438212 | -dewatering area: 21.55 square feet | -sludge inlet: 3″ Diameter | -sludge flow rate: Up to 100 Gallons per Minute | -cake dis...

Colloid Mill

• Manufacturer: Charlotte Chemicolloid Laboratories

All equipment is sold in “as is” condition. Locate It Direct Inc. is not liable or responsible for any loss or damages to the equipment sold. Locate It Direct Inc. is not liable or responsible for any loss, damag...