Used processing in indo

Wabash PC50-2418-4TM

• Manufacturer: Wabash

Machine type: Process Equipment | Machine location: California | Stock #: 631604 | -compression tonnage: 50 Tons | -compression cyl.: 7×7 | -platens: 24″ x 18″ Electric Heated, 9600 watts | -motor hp: 3 HP | -el...

Maxon 080KDZERLE-000001

• Manufacturer: Maxon

Maxon Kinedizer Burner #080KDZERLE-000001 Machine type: Process Equipment | Machine location: Ohio | Stock #: 645454 | Additional specs: 8″ Kinedizer LE, 15.8 MBtu/hr. Low Emissions | Burner fuel: Natural Gas – N...

2023 Esporta IS4200

• Manufacturer: Esporta

Equipment Overview The Esporta IS-4200 is a next-generation soft contents restoration system for decontaminating PPE, gear, textiles, and other high-value items impacted by fire, mold, sewage, or biohazards. It f...

Graco L-S20 5 Gallon

• Manufacturer: Graco

Machine type: Process Equipment | Machine location: California | Stock #: 482427 | Material container volume: 5.3 gal | Maximum air inlet pressure: 125 psi | – maximum flow rate: 1.6 GPM | – min flow: 1.6 GPM | ...

2021 SnowBall Machinery SNCF-600

• Manufacturer: SnowBall Machinery

Machine type: Process Equipment | Machine location: Upon Request | Stock #: 639717 | -capacity: 600L | -pneumatic requirements: 6 bar, 6L/min | -electrical requirements: 220V, 3P, 60Hz | -dimensions: 55.12″ x 35...

2020 Convectium 710 Shark 010-0707100-0007-0A

• Manufacturer: Convectium

Fill up to 100 devices at a time in less than 60 seconds Dual heat injection system (Max temp of 125C) 120 PSI Maximum Pressure / Ultra-Quiet – Only 60 decibels

2013 Frick XLP2-1012-503

• Manufacturer: Frick

335 Evaporative Tons Rated for R-717 and R-134a Refrigerants Base Heat Rejection = 6953 MBTUH 30 HP Fan Motor (2) 5HP Pump Motor Also Included: Mycom 200VLG Rotary Screw R-717 Refrigerant Compressor 400HP 480V 3P...

Quadro Comil, Model U20,

• Manufacturer: Quadro

Quadro Comil, Model U20, Used Quadro Comil, model U20, stainless steel construction, driven by hp xp motor, on stainless steel adjustable height stand, machine serial# U20-0433, built 2004. �Requires impeller at ...

Galloup CIP Skid

• Manufacturer: Galloup

Galloup CIP Skid Used Galloup CIP skid, stainless steel construction, with 200 gallon stainless steel make up tank, SPX CIP cycle pump with 5 hp motor, SPX return waste pump with 7.5 hp motor, serial# N11162, bui...

Bienfang 4468-H

• Manufacturer: Bienfang

This listing is for for a Vacuum Press from Bienfang Item is not not tested, sold as is. (For CSU use)Tag: 118468

Jetpharma Jet Mill, Model MC Jetmill 50

• Manufacturer: JetPharma

Jetpharma Jet Mill, Model MC Jetmill 50 Used Jetpharma jet mill, model MC Jetmill 50, stainless steel construction, with Ktron material feeder, type K-PH-MV-KT20, not complete , Jetpharma code# 24900C0516, built ...

4" x 60" BE Peterson Distillation Column Reboiler Unit, 316 S/S, 200#

• Manufacturer: Peterson

4" x 60" BE Peterson Distillation Column Reboiler Unit, 316 S/S, 200# Used BE Peterson distillation column reboiler unit, 316 stainless steel construction with 4" diameter x 60" high column section rated 200 psi ...

Aveka CCE Tech Air Classifier, Model 250

Aveka CCE Tech Air Classifier, Model 250 Used Aveka CCE Tech air classifier, model 250, cut size 1-50 micron, sharpness (D25/D75) .6-.8, feed rate up to 225 kg/hour, up to 250 scfm air flow, 12 in HG, 3 hp rotor ...

Alpine Augsburg Roto-Plexer Mill Grinder, Model RO 63/18, 40 HP

• Manufacturer: Alpine

Alpine Augsburg Roto-Plexer Mill Grinder, Model RO 63/18, 40 HP Used Alpine Augsburg Roto-Plexer Mill Grinder, Model RO 63/18, 4 knife rotor, swing away cover, 40 hp, 230/460 volt motor, blower discharge, serial#...