Processing

Search By Category

Search By Manufacturer

Search By Country

Building Filters

1156

Used tph

  • Trusted Seller
    6in Dia. x 30ft Long

    6in Dia. x 30ft Long Screw Conveyor

    • Manufacturer: Nord
    • Phase type: Three-phase

    Size: Drive: Diameter: 6in | Length: 30ft | Current auger speed: 48RPM | Throughput capacity: 2.3 TPH | Inlet/outlet: 6.75in² Flanged | Assembly: 3 Trough Sections with Hanger Bearings at Connections | Power outp...

    United States
  • CENTRIFUGE, PUSHER, ESCHER WYSS, P500-2,

    CENTRIFUGE, PUSHER, ESCHER WYSS, P500-2, 2-STAGE, 500MM, MONEL, 50HP, 25HP [2]

    • Manufacturer: Escher Wyss

    CENTRIFUGE, PUSHER, ESCHER WYSS, P500-2, 2-STAGE, 500MM, MONEL, 50HP, 25HP [2] Main motor VFD, hydraulic motor across line start. One unit missing motors & hydraulic oil tank. Reconditioning 4-5wks. with NTE Cont...

    Alvin, TX
  • Trusted Seller
    RARE METALS LLC S-10

    RARE METALS LLC S-10

    • Manufacturer: RARE METALS LLC

    RARE METALS LLC Model S-10 Dry Air Concentrator with 1/4 HP motor, 24" W x 57" L Belt, Capacity approx. 6 TPH

    North America
  • DRYER, HOLOFLITE, 24'' X 20',

    DRYER, HOLOFLITE, 24'' X 20', 2-SCREW, SS, RIETZ, TJ24-2K3320, 225# INDIRECT STEAM HEAT PROCESSOR

    • Manufacturer: Bepex/Rietz/Christian Bros.

    DRYER, HOLOFLITE, 24'' X 20', 2-SCREW, SS, RIETZ, TJ24-2K3320, 225# INDIRECT STEAM HEAT PROCESSOR Includes 2-1/2" rotary joints, cover. Product feed opening, flanged, approx. 43"wide x 21"long at drive end. Disch...

    Alvin, TX
  • Trusted Seller
    9ft Dia. x 60ft Long

    9ft Dia. x 60ft Long Rotary Drum Dryer

    • Manufacturer: Vulcan

    Dryer Completely Refurbished 2010 With New Controls & Instrumentation Limited Service, Project Cancelled, Mothballed. Burners Removed and In Storage. System Installed Under Cover Counter-Current, Fired at Dischar...

    United States
  • Conveyor System Options

    Conveyor System Options

      Conveyor System Options Fluffers Mark-Costello offers a complete line of 10 to 30 horsepower, single and double blade Fluffers. Fluffers prevent uneven loading of the baler’s charge chamber by breaking-up “lumps”...

      Paramount, CA
    • BRIQUETTER, BOLLINGER, 230A, 32'' X

      BRIQUETTER, BOLLINGER, 230A, 32'' X 28'', 300TONS, CS, 300HP [3]

      • Manufacturer: Bollinger, Pocatello, ID

      BRIQUETTER, BOLLINGER, 230A, 32'' X 28'', 300TONS, CS, 300HP [3] Unitized on I-beam skid, on 3ft high legs to allow for under roll troughed belt take away conveyor with 5hp motor reducer, speed controlled via VFC...

      Alvin, TX
    • no-image_en.png

      Cedarapids 350 TPH Counterflow Drum & Baghouse

      • Manufacturer: Cedarapids

      1994 Cedarapids E-400 skid mounted drum mixer (100”X48’) Hauck SJ 580 burner new in 2013 1994 Cedarapids Size 27 skid mounted baghouse rated at 56,000 CFM ​ ​ Ref# ETC 116CF

      Michigan City, IN
    • Sliderbed Conveyor Systems

      Sliderbed Conveyor Systems

        Sliderbed Conveyor Systems Mark-Costello’s Sliderbed Conveyors are friction driven conveyors with a belt supporting bed for low to medium volume applications. This group of conveyors is divided into three classes...

        Paramount, CA
      • Trusted Seller
        SIN MARCA UDM1900

        SIN MARCA UDM1900

        • Manufacturer: Sin Marca

        Portable asphalt plant 350 TPH model UDM1900 brand CMI Overview: Manufacturer: CMI Equipment included: control booth, burner, asphalt tank with boiler, dust extraction tank, diesel/fuel oil tank, four hoppers and...

        Mexicali, Mexico
      • Trusted Seller
        SYNTRON F-480-C-DT

        SYNTRON F-480-C-DT

        • Manufacturer: SYNTRON

        48x72" Electromagnetic Feeder, Model F-480-C-DT, Syntron Brand FEEDER NO. 4 Used, unserviced Heavy Duty Feeder Catalog - Syntron

        Hermosillo, Mexico
      • Trusted Seller
        Hy-G HR6 Centrifugal Gravity Concentrator

        Hy-G HR6 Centrifugal Gravity Concentrator – Hard Rock

        • Manufacturer: Hy-G Concentrators Inc.

        Applications: Recovering free gold and other heavy metals and minerals in crushing, milling, or recycling circuits Reprocessing crushed and milled tailings to remove gravity recoverable gold and other heavy metal...

        Savona, Canada
      • Trusted Seller
        (New) Hy-G P12 Centrifugal Concentrator

        (New) Hy-G P12 Centrifugal Concentrator

          Hy-G P12 Centrifugal Gravity Concentrator provides exceptional recovery of super fine alluvial placer gold and other minerals and metals and can continuously concentrate up to 24 hours before clean-out is require...

          Savona, Canada
        • Trusted Seller
          New Surplus 1800 TPH FAM

          New Surplus 1800 TPH FAM Kleeman Gundlach Feeding Crushing and Conveying Loadout System

          • Manufacturer: Kleemann - Reiner

          New Unused 1800 Ton Per Hour Conveyor Barge Loading System Consisting of: 1 - 140 Cubic Mt. Grizzly Feed Hopper 1 - 7 ft. x 45 ft. Apron Feeder 1 - Gundlach Model 5060S Crusher 1 - 48 in. wide x 850 ft. long Cove...

          Western Canada
        • Trusted Seller
          Rotex Screeners 523A AL/MS 3-Deck

          Rotex Screeners 523A AL/MS 3-Deck Screen

          • Manufacturer: Rotex Screeners

          Capacity: With Cable Eyes For Suspended Installation Overall Dimensions:

          Savona, Canada
        1112131415

        Overview

        Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

        FAQ

        What should I consider when buying used processing equipment?

        Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

        How do I arrange shipping for processing equipment?

        Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

        What is the typical maintenance for processing equipment?

        Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.