Processing

Building Filters

561

Used buhler

  • Trusted Seller
    Stainless Steel 321 Buhler Group

    Stainless Steel 321 Buhler Group OTW-500 Crystallizer/Evaporator Plastic - IPP# 219970

    • Manufacturer: Bühler

    stainless steel fluid bed crystallizer used on PET pellets with heated nitrogen total pressure drop, ca.30 mbar, differential pressure ca 2 mbar, design pressure pe=90 mbar product thickness ca.200mm approximate ...

    Princeton Junction, NJ
  • Trusted Seller
    Stainless Steel 321 Buhler AG

    Stainless Steel 321 Buhler AG OTW-500-A-32280 Shell and Tube Heat Exchanger - IPP# 219980

    • Manufacturer: Bühler

    tube chamber 1760mm wide x 1224mm long x 360mm deep with welded on top and bottom cone section

    Princeton Junction, NJ
  • Trusted Seller
    Buhler Spar 600/200-1-S MPN: 713308

    Buhler Spar 600/200-1-S MPN: 713308 Tank Mixer 24VAC 0-70° Range

    • Manufacturer: Bühler

    “MINOR SCRATCHES, FADED COLORS, RUST - SEE PICTURE FOR DETAILS” Buhler Spar 600/200-1-S MPN: 713308 Tank Mixer 24VAC 0-70° Range Buhler Spar 600/200-1-S MPN: 713308 Tank Mixer 24VAC 0-70° Range The BUHLER Spar 60...

    $5,200 USD

    Get financing

    Est. $102/mo

    Fleetwood, PA
  • Trusted Seller
    Stainless Steel 321 Buhler Group

    Stainless Steel 321 Buhler Group SMP-50-TS-S/V Mixer-Disperser - IPP# 230483

    • Manufacturer: Bühler

    Twin shaft disperser with 321 SS Vacuum/Dust Lid Designed for mixing powdered and liquid ingredients and for dispersion of the products being mixed Mixer Shaft RPM from 48 to 192 rpm disperser shaft 1440 rpm supp...

    Princeton Junction, NJ
  • Trusted Seller
    BUHLER DDM A10

    BUHLER DDM A10

    • Manufacturer: Bühler

    Used Buhler horizontal carbon steel ribbon blender, type DDM A10. Total volume 1000 ltr.Driven by 7,5 kW el. motor. Mixing trough measures approximately 2000mm long x 450mm diam. Bottom outlet is pneumatically op...

    Hainesport, NJ
  • Trusted Seller
    BUHLER DDM A40

    BUHLER DDM A40

    • Manufacturer: Bühler

    Used Buhler horizontal carbon steel ribbon blender, type DDM A40. Total volume 4000 ltr.Driven by 22 kW el. motor. Mixing trough measures approximately 3,200mm long x 700mm diam. Bottom outlet is pneumatically op...

    Hainesport, NJ
  • Trusted Seller
    BUHLER SPM-50-HT

    BUHLER SPM-50-HT

    • Manufacturer: Bühler

    Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with bu...

    Hainesport, NJ
  • Trusted Seller
    BUHLER SPM-50-HT

    BUHLER SPM-50-HT

    • Manufacturer: Bühler

    Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with bu...

    Hainesport, NJ
  • Trusted Seller
    ITEM 2788-1: BUHLER 28/30 ROTARY

    ITEM 2788-1: BUHLER 28/30 ROTARY AIRLOCK CARBON STEEL USED

    • Manufacturer: Bühler

    ITEM 2788-1: BUHLER 28/30 ROTARY AIRLOCK CARBON STEEL USED 9” x 11” INLET W/ 13” x 15” FLANGE 16” TALL INLET TO OUTLET

    $3,150 USD
    Greensboro, NC
  • Buhler SHP-TS-4-V Industrial Mixer, 460VAC,

    Buhler SHP-TS-4-V Industrial Mixer, 460VAC, 60Hz, 3.50Kw. - USED

    • Manufacturer: Bühler

    USED Unable to test due to oil being drained, Comes with two mixing pots. Buhler SHP-TS-4-V Industrial Mixer, 460VAC, 60Hz, 3.50Kw. Item is guaranteed to not be DOA for replacement or refund within 30 days of rec...

    $4,500 USD
    Kawkawlin, MI
  • Trusted Seller
    ITEM 1775: 110 SQUARE FOOT

    ITEM 1775: 110 SQUARE FOOT (APPROX) BUHLER DUST COLLECTOR WITH 1.5 HP NYB

    • Manufacturer: Bühler

    ITEM 1775: 110 SQUARE FOOT (APPROX) BUHLER DUST COLLECTOR WITH 1.5 HP NYB BUHLER PULSE JET DUST COLLECTOR: VERTICAL DUST COLLECTOR; CARBON STEEL; USED DESIGNED FOR NINE VERTICAL BAGS ( BAGS AND CAGES NOT IN...

    $3,500 USD
    Greensboro, NC
  • Trusted Seller
    Buhler 3 Station Lapper

    Buhler 3 Station Lapper

    • Manufacturer: Bühler

    Custom Mfg. by 3M, 3 Strasbaugh work heads, Air operated up/down arms w/ hand lever and valve adjustments to 5.5", in/out manual adjustment to 2.5", Up/down pointer adjustment to 5.5" Est., Rear offset adjustment...

    $6,500 USD

    Get financing

    Est. $128/mo

    Hugo, MN
  • Buhler Destoner

    Buhler Destoner

    • Manufacturer: Bühler

    Inventory numbers: 1625, 1626, 1627, 1628, 1629

    Dundas, MN
  • Buhler Airlock

    Buhler Airlock

    • Manufacturer: Bühler

    Convey-thru style Carbon steel construction Inlet: 8″ x 7″ Outlet: 2.75″ Overall height: 13.5″ Rotor length: 8.75″ Rotor diameter: 8.5″ Inventory #A1567

    Dundas, MN
  • Buhler Sifter

    Buhler Sifter

    • Manufacturer: Bühler

    Machine Type: MPAR DOM: 1999 Horsepower: 0.75 KW, 1100 RPM Roto Star 3 outputs Machine number: 10005425 Inventory #1934

    Dundas, MN
  • no-image_en.png

    Bühler DFZH-2 Hammermill

    • Manufacturer: Bühler
    • Model: DFZH-2

    Good condition Bühler DFZH-2 Hammermills. Located in Germany and other countries. Click request price for more information.

    Germany
23456

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.