Used cutter

NELMOR 810RGII

• Manufacturer: Nelmor
• Model: 810RGII

Used Nelmor Granulator. Model 810RGII, Serial #23197. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is...

NELMOR 810RGII

• Manufacturer: Nelmor
• Model: 810RGII

Used Nelmor Granulator. Model 810RGII, Serial #23195. New 1985 Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor460/3/60. Unit is factory sound enclosed, and is s...

2002 TRIA 45-35/CN-SL

• Manufacturer: Tria

Used TRIA model 45-35/CN-SL horizontal cutting granulator. Rotor width 450mm, rotor diameter 350mm, open rotor, number of rotor knives: 3, number of stator knives: 2, cross cut. With hopper, hinged top, motor Sie...

RAPID G200-48 KURF

• Manufacturer: Rapid

Used cutting mill by Rapid (SE) model G200-48 KURF. Mill is driven by 7.5 kW, 1470 rpm, 230-400 V, 50 Hz. Main feeding inlet has dimensions: 480 mm x 230 mm. Mill has also additional side feeding inlet for work o...

CUMBERLAND 62B

• Manufacturer: Cumberland
• Model: 62B

Used Cumberland 62B dual feed hopper with rear mounted 48" paddle in-feed, paddles powered by a 3 HP DC 180 volt motor, chain and sprocket drive, Boston gear model F231D-24-B9 24:1 gearbox, indcludes magnetic top...

CUMBERLAND 62B

• Manufacturer: Cumberland
• Model: 62B

Used Cumberland 62B dual feed hopper with rear mounted 48" paddle in-feed, paddles powered by a 3 HP DC 180 volt motor, chain and sprocket drive, Boston gear model F231D-24-B9 24:1 gearbox, includes magnetic top ...

DGM DGH600/800

• Manufacturer: DGM
• Model: DGH600

Unused DGM Environmental Technologies model DGH 600/800 granulator. Has approximately 800mm x 700mm opening with feed hopper that has side opening of 970mm x 770mm. Unit has (5x2) knives fitted to rotor which mea...

DGM DGH500/600

• Manufacturer: DGM
• Model: DGH500

Unused DGM Environmental Technologies model DGH 500/600 granulator. Has approximately 636mm x 615mm feed opening. Unit has (5x2) knives fitted to rotor which measures approximately 500mm diameter x 600mm wide. In...

WORTEX UP755

• Manufacturer: Wortex
• Model: UP755

Used Wortex model UP755 Under-The-Press granulator. Includes infeed paddle wheel assist, 10 hp rotor motor and 1 hp pull roll motor with 28.8/14.4 and 3.7/1.4 amps. Designed for blower discharge but no blower inc...

HOSOKAWA ROTOPLEX A RO 50/80

• Manufacturer: Hosokawa

HOSOKAWA ALPINE Blade Mill Type ROTOPLEX A RO 50/80 5 decks of 4 blades + counter-blades

HOSOKAWA ROTOPLEX A 80/160 RO

• Manufacturer: Hosokawa

HOSOKAWA ALPINE Blade mill Type ROTOPLEX A 80/160 RO 8 decks rotor with 5 blades 6 deck stator with 5 blades

NELMOR 810RGII

• Manufacturer: Nelmor
• Model: 810RGII

Used Nelmor Granulator. Model 810RGII, Serial #23190. New 1985. Has an 8" X 10" throat opening with a 2-knife semi-open rotor. Rotor is belt driven by a 5 HP motor, 460/3/60. Unit is factory sound enclosed and is...

25 HP

Used Polish made crusher. Has vertical chamber with bottom side discharge. Internal diameter 640 mm x depth 470 mm. Has two knives mounted on round rotor which is bottom belt driven by motor 18.5 kW, 2930 rpm, 38...

15 HP

Used vertical pre-crusher for plastics. Polish made. Machine has a milling chamber with internal diameter 500 mm. At the bottom of milling chamber there is a rotor with two blades. Rotor is belt driven by electri...

GETECHA SRS 100

• Manufacturer: Getecha
• Model: SRS 100

Used horizontal cutting mill by Getecha (Germany) type SRS 100 A1.10. Mill has two feeding inlets, each with diameter 40 mm. Milling chamber is designed in stainless steel and has internal diameter 100 mm x lengt...