Processing

Search By Category

Search By Manufacturer

Search By Country

Building Filters

1078

Used upright

  • Trusted Seller
    Cylindroconical tanks [4 pieces]

    Cylindroconical tanks [4 pieces]

    • Manufacturer: Holvrieka

    Insulated and clad stainless steel tanks standing on upright frames, each with three frame cooling zones and one cone cooling zone.

    Freising, Germany
  • Trusted Seller
    CIP tank [6-piece]

    CIP tank [6-piece]

    • Manufacturer: ABAB

    upright, insulated stainless steel CIP tank with 6 containers arranged one above the other. The total capacity is 500 hl.

    Freising, Germany
  • Trusted Seller
    Stainless steel container 240 cbm

    Stainless steel container 240 cbm

    • Manufacturer: Sielmann

    Design: Upright cylinder with inwardly curved lower base, sloped to the outlet. With a conical upper base. Propeller agitator installed at an angle in the cylinder below, 2.7 kW, 465/970 rpm. Insulation around th...

    Bremen, Germany
  • 1987 AXMANN TURBOMIX TME 2

    1987 AXMANN TURBOMIX TME 2

    • Manufacturer: Axmann

    Rigid single-arm design, stationary (upright), sand bunker, sand dosing slide, additive dosing pump and valves, mixing capacity 2 t/h, throat depth 1.0 m, drive power 4.0 kW, connected loads 380 V, 50 Hz, control...

    Meinerzhagen, Germany
  • Trusted Seller
    Stainless steel tank 0.25 cbm

    Stainless steel tank 0.25 cbm with agitator

      1 cyl. upright stainless steel tank, used Contents: 0.25 cbm Order number: 4148 Material: V2A Dimensions: 800 mm diameter 500 mm cylindrical height 200 mm lower floor 450 mm ground clearance 1,150 mm app...

      Bremen, Germany
    • Trusted Seller
      bright beer cellar

      bright beer cellar

      • Manufacturer: GROSS Behälterbau GmbH

      Pressurised tank cellar with three upright stainless steel pressure tanks of 207 hl each and with double-seat valve solution on the operating level. All tanks can be cooled.

      Freising, Germany
    • 1991 AXMANN TURBOMIX TMS 10

      1991 AXMANN TURBOMIX TMS 10

      • Manufacturer: Axmann

      Double-joint design, upright, capacity approx. 10 t/h, throat depth 2.5 + 1.0 m, double mixing arm (premixer) 2x 2.2 kW, turbo mixer 7.5 kW, additive dosing pumps 2x 0.6 kW, PLC control system

      Meinerzhagen, Germany
    • Trusted Seller
      Stainless steel container 50 cbm

      Stainless steel container 50 cbm

      • Manufacturer: Sielmann

      Design: cylindrical, upright with lower inwardly curved conical base, concrete base and upper conical base. Propeller agitator installed diagonally in the cylinder below, 2.5 kW, 930 rpm. Insulation around the cy...

      Bremen, Germany
    • Trusted Seller
      Stainless steel tank 0.4 cbm

      Stainless steel tank 0.4 cbm with agitator

        1 cyl. upright stainless steel tank, used Contents: 0.4 cbm Order number: 4151 Material: V2A Dimensions: 800 mm diameter 800 mm cylindrical height 100 mm lower floor 250 mm ground clearance 1,150 mm appr...

        Bremen, Germany
      • 2010 F.A.T. COMBIMIX DS60

        2010 F.A.T. COMBIMIX DS60

        • Manufacturer: F.A.T.

        Double-joint design, upright, dosing pumps and valves, mixing capacity 40/60 t/h, feed screw conveyor, radius 4.5 m, mixing arm, radius 3.0 m, discharge height 3.3 m, connected load approx. 54 kW, platform, sand ...

        Meinerzhagen, Germany
      • Trusted Seller
        1.6 cbm Stainless Steel Tank

        1.6 cbm Stainless Steel Tank Roth

        • Manufacturer: Roth

        Artikel# 1228 Technical specifications: Cyl. upright stainless steel container, insulated, marbled, large agitator, bottle base, hinged lid, outlet at bottom centre. Capacity: 1.600 litres Diameter: 1,700 mm Heig...

        Heidenheim, Germany
      • Trusted Seller
        bright beer cellar

        bright beer cellar

        • Manufacturer: GROSS Behälterbau GmbH

        Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water.

        Freising, Germany
      • Trusted Seller
        storage tanks [8 pcs.]

        storage tanks [8 pcs.]

          8 upright storage tanks, Total capacity: 150 hl 1 tank with 50 hl, Metrec, 1 tank with 40 hl, Metrec, 6 tanks with 10 hl

          Freising, Germany
        • Trusted Seller
          Stainless steel tank 0.26 cbm

          Stainless steel tank 0.26 cbm with agitator

            1 cyl. upright stainless steel tank, used Contents: 0.26 cbm Order number: 4089 Material: V2A Dimensions: 780 mm diameter 550 mm cylindrical height 150 mm lower floor 350 mm ground clearance 1,050 mm app...

            Bremen, Germany
          • 1989 AXMANN TURBO-Mixer TMG 20

            1989 AXMANN TURBO-Mixer TMG 20

            • Manufacturer: Axmann

            Double-joint design, upright, dosing pumps and valves, mixing capacity approx. 20 t/h, twin-shaft mixing arm, radius 4.0 m, drive 2x 3.0 kW, turbo mixer, radius 2.5 m, drive 15 kW, connected load 31 kW, connected...

            Meinerzhagen, Germany
          3435363738

          Overview

          Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

          FAQ

          What should I consider when buying used processing equipment?

          Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

          How do I arrange shipping for processing equipment?

          Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

          What is the typical maintenance for processing equipment?

          Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.