Processing

Search By Category

Search By Manufacturer

Search By Country

Building Filters

11008

Used cfm

  • Trusted Seller
    47 CFM AEC Dehumidifying Wheel

    47 CFM AEC Dehumidifying Wheel Dryer with Hopper 460V

    • Manufacturer: AEC

    Model: RDC-P-75 | Hopper capacity (l): 125 | Dew point °c: <-40 | Drying temperature °c: Max. 80 - 160 | Air flow rate (cfm): 47.1 | Voltage: 460/3/60 | Includes: Hoses, Clamps, Wand & Receiver | Cfm: 47

    Worcester, MA
  • Trusted Seller
    9740 CFM

    9740 CFM

      Unused carbon steel centrifugal blower fan driven by EL motor 11 kW, 1480 rpm, 400/690 V, 50 hz. Working output up to 16488 M3/h. Working temperature up to 20°C. Working outlet pressure 1480 pa. Working rotation ...

      Hainesport, NJ
    • Trusted Seller
      5784 CFM

      5784 CFM

        Unused carbon steel centrifugal blower fan belt driven by el motor 11 kW, 1460 rpm, 400/690 V, 50 hz. Working output up to 2.73 m3/sec (9828 m3/h). Working temperature up to 450°C. Working outlet pressure 1100 Pa...

        Hainesport, NJ
      • Trusted Seller
        5890 CFM

        5890 CFM

          Unused carbon steel centrifugal blower fan belt driven by el motor 11 kW, 1460 rpm, 400/690 V, 50 hz. Working output up to 2.78 m3/sec (10008 m3/h). Working temperature up to 450°C. Working outlet pressure 1100 P...

          Hainesport, NJ
        • Zeks 60 CFM Heatless Desiccant

          Zeks 60 CFM Heatless Desiccant Air Dryer 60MPS1000 115V, 1 ph

          • Manufacturer: Zeks

          Zeks Heatless Purge Desiccant Air Dryer Model #: 60MPS1000 S/N: 549917 Desiccant: 33 lbs per tower 115V, 1 ph Max Inlet Air Pressure: 150 PSI

          $1,200 USD
          Cedarburg, WI
        • Trusted Seller
          Compressor 6,781 m3/h (3,991 CFM)

          Compressor 6,781 m3/h (3,991 CFM) - IPP# 210372

          • Manufacturer: Ingersoll Dresser

          second stage only ethylene gas refrigeration compressor inlet flow 6781 cu meter/hr (3,990 cu ft/min) inlet pressure 2.64 barg (40 psi) inlet temp -6.6 deg C Discharge pressure 19.6 barg (288 psi) discharge temp ...

          Princeton Junction, NJ
        • Trusted Seller
          Blower 27,888 m3/h (16,414 CFM)

          Blower 27,888 m3/h (16,414 CFM) - IPP# 103634

          • Manufacturer: Aktiengesellschaft Kohnle

          @ 7500 mm Wg radial blower Kopp and Kausch 630 KW, 1138 Kg/cu meter 11" x 26" inlet motor: Type 1L45335 motor thru Voith speed increaser

          Princeton Junction, NJ
        • Trusted Seller
          Blower 38,284 m3/h (22,533 CFM)

          Blower 38,284 m3/h (22,533 CFM) - IPP# 103633

          • Manufacturer: Aktiengesellschaft Kohnle

          @ 6700 mm Wg radial blower mfg: Kopp and Kausch 831 KW, 1153 Kg/cu meter Type 1LA3345 driven by Motor thru Voith speed increaser

          Princeton Junction, NJ
        • Trusted Seller
          Blower 10,194 m3/h (6,000 CFM)

          Blower 10,194 m3/h (6,000 CFM) - IPP# 1821

          • Manufacturer: Allis Chalmers

          Single stage centrifugal blower/compressor 6 psig max discharge pressure 6" suction opening, 12" discharge 3600 rpm operating speed

          Princeton Junction, NJ
        • Trusted Seller
          Blower 3,738 m3/h (2,200 CFM)

          Blower 3,738 m3/h (2,200 CFM) - IPP# 225230

          • Manufacturer: Lamson

          2200 SCFM cast steel 4-stage 2200 SCFM SO #62626 20 HP inlet vacuum 4" Hg (13.1" Hg max) inlet temperature 80 degrees F

          Princeton Junction, NJ
        • Trusted Seller
          Blower 2,018 m3/h (1,188 CFM)

          Blower 2,018 m3/h (1,188 CFM) - IPP# 225229

          • Manufacturer: Lamson

          cast steel 4-stage blower/exhauster 2200 SCFM SO #62626 20 HP inlet vacuum 4" Hg (13.1" Hg max), inlet temperature 80 degrees F driven by 15kw, 3/50/415 volt, 2920 rpm motor,

          Princeton Junction, NJ
        • 24,000 CFM Filter 1 DB-12-18-15

          24,000 CFM Filter 1 DB-12-18-15 Dustron Dust Containment Booth Down Draft Table

          • Manufacturer: Filter-1

          Filter 1 Dustron DB Series Dust Containment Booth Flow Rating: 12,000 CFM (x2) Model #: DB-12-18-15 S/N: 9-28-238 208-230/460V, 3 ph 15 Hp Blower Motor Booth Dimensions: Approx 114" Height x 24' Width Dust...

          $42,500 USD

          Get financing

          Est. $800/mo

          Cedarburg, WI
        • 3 Hp Grivna 1200 CFM

          3 Hp Grivna 1200 CFM Wet-Type Explosion Resistant Fine Metal Dust Collector Model #: 1200

          • Manufacturer: Grivna Machine Inc.

          Grivna Wet-Type Explosion Resistant Dust Collector Water Capacity: Flow Rate: 1200 CFM Model #: 1200 S/N: 931034 Motor Hp: 3 220V, 3 ph @ 60 Hz

          $3,200 USD
          Cedarburg, WI
        • Pre-Owned Donaldson Torit CPV-1 Dust

          Pre-Owned Donaldson Torit CPV-1 Dust Collector – 700 CFM

          • Manufacturer: Donaldson / Torit / DCE

          53764007 Pre-Owned Donaldson Torit CPV-1 Dust Collector 700 CFM, 90-100 psig. (1) filter pack. 1.5 HP. 3/60/208-460V motor. With hopper

          Belvidere, IL
        • Trusted Seller
          47 CFM AEC Dehumidifying Wheel

          47 CFM AEC Dehumidifying Wheel Dryer with Hopper 460V

          • Manufacturer: AEC

          Model: RDC-P-75 | Hopper capacity (l):: 125 | Dew point:: <-40 °C | Drying temperature:: Max. 80 - 160 °C | Air flow rate (cfm):: 47.1 | Voltage:: 460/3/60 | Includes: Hoses, Clamps, Wand & Receiver | Cfm: 47

          Worcester, MA
        3738394041

        Overview

        Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

        FAQ

        What should I consider when buying used processing equipment?

        Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

        How do I arrange shipping for processing equipment?

        Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

        What is the typical maintenance for processing equipment?

        Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.