Used bolt

12"dia. X 14' L Orthman Industrial Screw Auger Conveyor

• Manufacturer: Orthman

ITEM #: 20115 Used 12"dia. X 14' L Orthman Industrial Screw Auger Conveyor All carbon steel construction.Two-section u-trough with foot mounts and bolted top covering. Trough length is 15'-10" between endplates, ...

300 cubic foot Strong Scott Industrial Double Ribbon Blender Mixer 40HP

• Manufacturer: Strong Scott

All carbon steel construction Mixing chamber dimensions: 5'W X 15'-2"L X 5'-5"D Full top covering with a 30" square cut-out and a 32" square covered inspection hatch 14" square discharge and an 8"Ø flanged discha...

Langsenkamp Tank SS Single Wall 1200

• Manufacturer: Langsenkamp

Langsenkamp, 1200 gallon, 304 stainless steel, single wall tank. 78" diameter x 62" straight wall. Equipped with a 3 HP drive powering a single motion dual six-paddle prop style mixer mounted on a 36" long x 21" ...

Hayes & Stolz Mixer Powder Ribbon Carbon HR150502

• Manufacturer: Hayes & Stolz

Hayes & Stolz, Model HR15-0502, 20 ft³ (15 ft³ workable), double ribbon mixer with carbon steel contact parts. Inner mixing chamber dimensions: 50" in Length; 26" in Width; 28" in Depth. Equipped with bolt down c...

1.8 Cu Ft Littleford Mixer, Model DVT 50, 304 S/S, JKT, 450#

• Manufacturer: Littleford

1.8 Cu Ft Littleford Mixer, Model DVT 50, 304 S/S, JKT, 450# Used Littleford mixer, model DVT 50, 304 stainless steel product contact surfaces, 1.8 cu ft total capacity, 1.26 cu ft working capacity, rated 450 psi...

10 Gal Northland Stainless Reactor, 316L S/S, 100/100#

• Manufacturer: Northland

10 Gal Northland Stainless Reactor, 316L S/S, 100/100# Used 10 gallon Northland Stainless reactor, 316L stainless steel construction, approximately 14" diameter x 13.5" straight side, bolt on removable dished top...

42 Cu Ft Processall Plow Mixer, Model 1200HL, 304 S/S

• Manufacturer: Processall

42 Cu Ft Processall Plow Mixer, Model 1200HL, 304 S/S Used Processall plow blender, model 1200HL, 304 stainless steel construction, 1,200 liter capacity, 42 cu ft total total, 29.4 cu ft working capacity, approxi...

Philadephia Mixer Pmg-13 #14972

• Manufacturer: Philadephia Mixer

Philadelphia mixer 1/3 horsepower , 350 final rpm , model# pmg-13, serial # 86ahb1316, 1/3 hp 230/460/3/60, 8 bolt flange, 58'' long stainless steel shaft 8'' diameter, 3 blade propeller, 3/4''diameter shaft, 6...

Hartzell Fan VA29-BD Axial Inline Blower, 20Hp @ 1760RPM, 575V

• Manufacturer: Hartzell Fan

Brand: Hartzell Fan Model: VA29-BD Orientation: Axial, Inline Blade/Wheel/Paddle Specifications Diameter: 29" Width: 15-3/4" Inlet Specifications Inner Diameter (ID): 29" Outer Diameter (OD): 32-1/2" Bolt Count: ...

Buffalo Forge Company OW-45 Top Horizontal CCW 90 Blower

• Manufacturer: Buffalo

Brand: Buffalo Forge Company Model: OW-45 Orientation: Top Horizontal CCW 90 Blade/Wheel/Paddle Specifications Diameter: 31.5" Width: 10" Inlet Specifications Inner Diameter (ID): 19" Outer Diameter (OD): 22-1/8"...

Kimbell Gin KGMD 25 CCW Top Horizontal, w/ No Drive

• Manufacturer: Kimbell Gin

Brand: Kimbell Gin Model: KGMD 25 Orientation: CCW Top Horizontal Blade/Wheel/Paddle Specifications Diameter: 17" Width: 6" Inlet Specifications Inner Diameter (ID): 11" Outer Diameter (OD): 14" Bolt Count: 6 Bol...

COLUMN 406mm X 1016mm

• Manufacturer: COLUMN

Used stainless steel charcoal filter column. Internal approximately 406mm diameter X 1016mm straight side. Has bolted dished top and bottom heads. Mounted on frame with manually operated tilt.

COLUMN 508mm X 1016mm

• Manufacturer: COLUMN

Used stainless steel charcoal filter column. Internal approximately 508mm diameter X 1016mm straight side. Has bolted dished top and bottom heads. Mounted on frame with manually operated tilt.

Stainless Steel 304 Tank - IPP# 246023

12000 liter working volume, top mounted agitator driven by 15kW, 3/50/380/660 volt, 1470 rpm IP56 motor via a reduction gearbox, stainless steel half pipe coil jacket on straight side and bottom dish, unit with: ...

COLUMN 406mm X 1016mm

• Manufacturer: COLUMN

Used stainless steel charcoal filter column. Internal approximately 406mm diameter X 1016mm straight side. Has bolted dished top and bottom heads. Mounted on frame with manually operated tilt.