Processing

Search By Category

Search By Manufacturer

Search By Country

Building Filters

2035

Used f p

  • Trusted Seller
    CTM LABELING SYSTEMS 360A-1471-1407 LABEL

    CTM LABELING SYSTEMS 360A-1471-1407 LABEL APPLICATOR 360 SERIES

    • Manufacturer: CTM

    “MAY HAVE SELF WEAR” CTM LABELING SYSTEMS LABEL APPLICATOR 360A-1471-1407 360A SERIES 115 VOLTS 5 AMP 50-60 HZ SINGLE PHASE AIR CONSUMPTION @ 60-90PSI: UP TO 4 CFM LABEL SPEED: UP TO 1500 IN/MIN OR 2100 IN/MIN PA...

    $2,500 USD
    Coffeyville, KS
  • Trusted Seller
    ARO AIR FILTER ASSEMBLY

    ARO AIR FILTER ASSEMBLY

    • Manufacturer: ARO

    “OLD STOCK, NO BOX” ARO AIR FILTER ASSEMBLY F35121-420 COMPRESSED AIR FILTER PARTICULATE 1/4" NPT 5 MICRON 49 CFM 250 PSI MAX BOWL CAPACITY: 0.4OZ MANUAL DRAIN SERIES 1000 ALUMINUM 23 DEGREES F MINIMUM TEMPERATUR...

    $175 USD
    Coffeyville, KS
  • Trusted Seller
    Holoflite, Porcupine, Bethlehem, C/st, Hot

    Holoflite, Porcupine, Bethlehem, C/st, Hot Oil #A735858

    • Manufacturer: Bethlehem

    Bethlehem porcupine holoflite/paddle dryer, Model# 1P3024JTC, 30" x 24' long, 1/2 degree blade pitch, carbon steel construction. Designed for hot oil service, rated for 65 PSI @ 650 deg. F. Complete unit includin...

    Tulsa, OK
  • Process Engineering Inc Cryogenic Storage

    Process Engineering Inc Cryogenic Storage Tank, 50,000 Gallon, Model H57740-8

    • Manufacturer: Process Engineering

    53364001 Used Process Engineering Inc Cryogenic Storage Tank, 50,000 Gallon, Model H57740-8, Horizontal. For LOX/ Liquid oxygen or nitrogen. Approximately 10' 5.375" diameter x 86' 2.6875" straight side. Elliptic...

    Belvidere, IL
  • Trusted Seller
    Pall Small Capsule Filter 6

    Pall Small Capsule Filter 6 micron - P9640-A

    • Manufacturer: Pall

    Suitable for EFI VUTEk & Agfa Jeti printers. This is the original PALL part number that corresponds to EFI VUTEk part number P9640-A. Specifications - Type: Small Capsule Filter - Removal rating: 6 micron - Con...

    Birmingham, United Kingdom
  • Trusted Seller
    Goedhart VCI-p-33457

    Goedhart VCI-p-33457

    • Manufacturer: Goedhart

    Description for Goedhart VCI-p-33457 Used Goedhart VCI-p-33457 evaporator on Freon with hot gas defrost. Complete with 3 Gea Goedhart FN045-VDW.2F.A7P2 fans - 50 Hz - 0,35/0,22 kW - 1280/970 RPM - diameter 450 mm...

    Hillegom, Netherlands
  • A&B Process Systems 400 Gallon

    A&B Process Systems 400 Gallon Jacketed Tank, 304 Stainless Steel,

    • Manufacturer: A&B

    52058001 Used A&B Process Systems 400 Gallon Jacketed Processor Tank, 304 Stainless Steel, Vertical. Approximate 48" diameter x 49" straight side. Dished top and slight cone bottom. Dimple 304 stainless steel jac...

    Belvidere, IL
  • Shanklin Shanklin S24B SN#S89133 Hot

    Shanklin Shanklin S24B SN#S89133 Hot Knife & Adjustable Inverting Head

    • Manufacturer: Shanklin
    • Model: S-24

    Shanklin S-24B The Shanklin® Semi-Automatic L-Sealers are built for applications that require packaging line speeds approaching those of fully automatic sealers, but where equipment cost is a factor or where the ...

    Skokie, IL
  • CLARK 2M4 45677

    CLARK 2M4 45677

    • Manufacturer: Clark

    HORIZ SPLIT CASE; TRAIN "A" OVERHAULED 83; IN TRAIN WITH COMPRESSOR #45677-1 AND TURBINE #45678-1; NEVER RETURNED TO SERVICE; P1=89.3 PSIA; T1=95F; P2=232 PSIA; T2=363F; NC1=11600; LABY SEALS MAWP=3...

    Cleveland, TX
  • Trusted Seller
    Goedhart DVS 43507 P

    Goedhart DVS 43507 P

    • Manufacturer: Goedhart

    Description for Goedhart DVS 43507 P Used Goedhart DVS 43507 P Freon evaporator. Complete with 3 Ziehl-Abegg FN050-6EW.4F.A7P1 fans - 50 Hz - 0,30 kW - 910 RPM - diameter 500 mm and a total airflow of 14.002 m³/h...

    Hillegom, Netherlands
  • NUOVO PIGNONE BCL306/b 84792

    NUOVO PIGNONE BCL306/b 84792

    • Manufacturer: Nuovo Pignone

    P1 1977 PSIA; P2 3300 PSIA; DISCHARGE UP; 6 STAGES; T1 100 DEG. F.; T2 253 DEG. F.; UP SUCTION; CASING DESIGN 4980 PSIG - 300 DEG. F.; NC1 7600 RPM; MCOS 15300 RPM; DRIVE THRU CASING; BUILT IN 1968; 3RD CASE; INC...

    Cleveland, TX
  • Trusted Seller
    MAGNUM SYSTEMS MODEL APO OPEN

    MAGNUM SYSTEMS MODEL APO OPEN MOUTH BAG AUGER PACKER TVB2-39879

    • Manufacturer: Magnum

    “MISSING BAG ATTACHMENT PIECE, SOME WEAR” MAGNUM SYSTEMS TAYLOR PRODUCTS TVB2-39879 MODEL APO OPEN MOUNTH BAG AUGER PACKER 15 TO 125 LB CAPACITY DODGE TORQUE ARM SPEED REDUCER SIZE: SCXT105 PART NO: 351165 DL CLA...

    $7,500 USD

    Get financing

    Est. $147/mo

    Coffeyville, KS
  • Krowne FMC24 1 Section Glass

    Krowne FMC24 1 Section Glass Chiller w/ 90 Mug Capacity, Stainless, 115v

    • Manufacturer: Krowne

    The Krowne FMC24 1-section glass chiller keeps your mugs cold and frosty for serving a variety of beverages. It can accommodate up to (90) 10-ounce mugs at a time, perfect for bars, restaurants, and more. There i...

    $4,239 USD
    Lombard, IL
  • Equipex GES40/1 Single Waffle Maker

    Equipex GES40/1 Single Waffle Maker w/ Cast Iron Plates, 120v

    • Manufacturer: Equipex

    The Equipex Sodir GES40/1 waffle baker is designed with cast iron plates that provide even heat distribution for consistent results. Its thermostatically controlled heating zone enables precise temperature adjust...

    $1,516 USD
    Lombard, IL
4041424344

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.