Used inner

Legion 60 Gallon Kettle Lt-60 Gal #16497

• Manufacturer: Legion 60 Gallon Kettle

60 gallon stainless steel food grade ketttle by legion utensils co., model lt-60 gal, serial # 662287. Featuers 29. 5" diameter x 25" deep, jacketed body is national board rated for 40 psi @ 300 degrees f, inner ...

IMA Life / BOC Edwards Dryer Freeze 140 SQ FT

• Manufacturer: IMA

BOC Edwards, Stainless steel, single door, freeze dryer, with 140 sq ft of usable product shelf area has stoppering capability and pounds of product per hour – depending on materials and application. Equipped wit...

Patterson Kelley Mixer Powder Twin Shell 8QT

• Manufacturer: Patterson-Kelley

Patterson Kelly, 8 qt, 304 stainless steel jacketed, vacuum twin shell mixer. Rated to 140 lbs. per ft³ and Ibs. per hour – depending on materials, application and machine configuration. Equipped with (2) 7" ID ...

UBE 6800 MT Aluminum Extrusion Press (14594)

• Manufacturer: UBE Industries

One Used 6800 MT UBE Aluminum Extrusion Press (14594) One Used 6800 MT UBE Aluminum Extrusion Press Stock # 14594 Inner hole of the extrusion cylinder 18" 467mm Inner bore 14" 365mm Length 1405mm Outer diameter 1...

Ekato Unimix SRT50/F30

• Manufacturer: Ekato

Used 50 liter Stainless Steel Triple motion Vacuum mixer. Manufactured by Ekato GmbH. Model Unimix SRT50/F30. Top entering twin motion agitator with sidewall scrappers driven by 3 kw motor. Inner paddles driven b...

Donaldson EA905 Centrifugal Mist Collector (Q-230944)

• Manufacturer: Donaldson / Torit / DCE

Donaldson Torit EA905 Centrifugal Mist Collector, includes - USED, good condition, very lightly used (40 hours, temporary unit) - pressure washed, cleaned, tested, works - NEW Motor, 3 HP, 800 cfm at 2” wg - 208-...

Graham 3-Stage

• Manufacturer: Graham

Used Graham 3-stage ejector vacuum system. (1) 10 X 6 inner-condenser, stainless steel shell rated full vacuum/150 psi @ 400°F. (1) 6 X 3 after-condenser, stainless steel shell rated full vacuum/150 psi @ 400°F, ...

2018 EMDE RSF 200x3673 TL

• Manufacturer: EMDE

Very little used EMDE model RSF 200x3673 TL stainless steel screw conveyor. - Unit measures approximately 200 mm inner diameter x 3673 mm long (flange to flange), total lenght is approximately 4250 mm (without dr...

REBUILT NASH 904 R1/R2 WITH 2 YEAR WARRANTY

• Manufacturer: Nash
• Model: 904 R1

REBUILT NASH 904R1 or R2 VACUUM PUMP The above vacuum pump will be repaired to print specifications. Body: Repair weld all washed areas and pre-machine to accept stainless steel liner. The sweep areas to be 1⁄...

Graham 3-Stage

• Manufacturer: Graham

Used Graham 3-stage ejector vacuum system. With (1) 10 X 6 inner condenser, stainless steel shell rated full vacuum/150 psi @ 400°F, tubes 150 psi at 400°F. (1) 6 X 3 after-condenser stainless steel shell rated f...

REBUILT NASH CL4002

• Manufacturer: Nash
• Model: CL4002

Body: Repair weld all washed areas, pre-machine to accept a stainless steel (SS) liner, using (SS) material. The sweep area will be ¼” thickness to the side. The center shroud will be constructed of ½” (SS) mater...

BMT Venticell 55 Comfort NEW Mechanical Forced Air Oven

An accurate and quick laboratory oven with a 55-liter chamber volume. Comfort model with a Fuzzy-Logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on...